Buchumschlag

Temperature distribution on a cathode emitter during the formation of a high-frequency vacuum

Gespeichert in:

Bibliographische Detailangaben
Datum:	2009
Hauptverfasser:	A. V. Nedolja, E. I. Pivaev, I. K. Titov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2009
Schriftenreihe:	Physical surface engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000873030
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Modelling of Conditions of Existence of the Emitter of a Refractory Material During Cathodic Vacuum—Arc Deposition
von: V. D. Alimov, et al.
Veröffentlicht: (2014)

Numerical simulation of the spatial distribution of metal ions in a vacuum arc
von: A. V. Nedolja, et al.
Veröffentlicht: (2010)

Emittance measurement of electron beam of RF gun with plasma ferroelectric cathode
von: Khodak, I.V., et al.
Veröffentlicht: (2006)

High-temperature metallic cathode for RF gun
von: Biller, E.Z., et al.
Veröffentlicht: (2001)

Characteristics of high-frequency pulsed current arc with refractory cathode
von: I. Krivtsun, et al.
Veröffentlicht: (2022)

High-productive source of the cathodic vacuum-arc plasma with the rectilinear filter
von: Vasylyev, V.V., et al.
Veröffentlicht: (2013-10-23)

Ultrasonic level gauges with temperature error correction and with lower emitters
von: A. M. Savoljuk, et al.
Veröffentlicht: (2017)

Influence of laser radiation parameters on the formation of a metal microdeposition during laser-induced pyrolysis from the vapor phase
von: I. G. Velichko, et al.
Veröffentlicht: (2011)

Influence of the cold cathode material on the operating mode of the pulse high-current vacuum diode in a microsecond range
von: Kolyada, Yu.E.
Veröffentlicht: (1999)

Vacuum-arc plasma source with steered cathode spot
von: Aksyonov, D.S., et al.
Veröffentlicht: (2008)

Study of ultrarelativistic beam emittance
von: Khoruzhiy, V.M.
Veröffentlicht: (2001)

Formation of effective emitters of electrons at laser evaporation of oriented carbon nanotubes
von: I. M. Sidorchenko, et al.
Veröffentlicht: (2012)

Broadband Microwave Emitter on a Basis of Gas Discharge Plasma
von: Ovsyanikov, V. V.
Veröffentlicht: (2013)

Nanocrystalline coatings by vacuum-arc method with usage of high frequency voltage
von: P. V. Turbin, et al.
Veröffentlicht: (2006)

Features of synthesis of Ti-Si-N coatings by condensation of vacuum arc plasma with a composite cathode
von: Aksenov, I.I., et al.
Veröffentlicht: (2011)

Mineral insulators for kompton detectors of neutrons with a metal hafnium emitter
von: Bohdan, E.A., et al.
Veröffentlicht: (2020)

Mechanisms affecting the speed and direction of vacuum arc cathode spots movement in a magnetic field
von: Vasyliev, V.V., et al.
Veröffentlicht: (2023)

Diode emitters for indocator and information systems
von: Ya. Shopa
Veröffentlicht: (2014)

The research of the temperature fields during the tempering with the heating of high-frequency currents using mathematical modeling
von: Погрібний, М. А., et al.
Veröffentlicht: (2015)

The research of the temperature fields during the tempering with the heating of high-frequency currents using mathematical modeling
von: Погрібний, М. А., et al.
Veröffentlicht: (2015)

The research of the temperature fields during the tempering with the heating of high-frequency currents using mathematical modeling
von: M. A. Pohribnyi, et al.
Veröffentlicht: (2013)

Ultra-high vacuum investigations of atomic layers at low temperatures
von: Grazhulis, V.A.
Veröffentlicht: (1998)

An Instrument for Control of Parameters of X-ray Emitters
von: V. D. Ryzhikov, et al.
Veröffentlicht: (2013)

II. The droplet phase of cathode erosion in steady-state vacuum arc
von: V. M. Khoroshikh
Veröffentlicht: (2004)

Influence of the method of depositing vacuum-arc TiN coatings on their gas evolution in vacuum at high temperatures
von: G. P. Glazunov, et al.
Veröffentlicht: (2009)

Features of an ion bunch collective acceleration by a boundary of a distributed virtual cathode
von: Lymar, A.G.
Veröffentlicht: (2006)

Vacuum high-temperature refining of carbon materials using NaCl vapors as a transport and reaction medium
von: Kravtsov, Ya.V., et al.
Veröffentlicht: (2020)

Sponge-like nanostructured silicon for integrated emitters
von: Hubarevich, A., et al.
Veröffentlicht: (2010)

Features of the morphology of coating surfaces applied from a filtered vacuum-arc cathode plasma to ferromagnetic substrates
von: V. V. Vasilev, et al.
Veröffentlicht: (2012)

The use of powder cathodes for the deposition of Ti-Si-N coatings from a filtered vacuum arc plasma
von: V. V. Vasilev, et al.
Veröffentlicht: (2015)

High-temperature hardness of multilayer metal–metal nitride vacuum-arc coatings
von: V. F. Horban, et al.
Veröffentlicht: (2021)

Investigation of carbon cathode surface before and after the passage of combined DC vacuum arc with superimposed high-current arc pulses
von: Zavaleyev, V., et al.
Veröffentlicht: (2016)

High-frequency discharges of low pressure in vacuum-plasma technology of low power-consuming for microstructure etching
von: V. I. Farenik
Veröffentlicht: (2004)

Charging of macroparticles in a high-voltage vacuum arc sheath
von: Bizyukov, A.A., et al.
Veröffentlicht: (2015)

X-Ray fluorescence determination of impurity traces using a secondary emitter and a solid-state detector
von: Mikhailov, I.F., et al.
Veröffentlicht: (2010)

Sponge like nanostructured silicon for integrated light emitters
von: A. Hubarevich, et al.
Veröffentlicht: (2010)

Physicochemical regularities of a high-voltage electroporcelain formation with a sintering temperature of 1200 °C
von: Bohdanova, K.B.
Veröffentlicht: (2018)

About efficiency of vacuum-arc plasma sources with separation of drop-phase cathode erosion
von: V. M. Khoroshikh, et al.
Veröffentlicht: (2009)

Cathode-ray options on the vacuum stoves base in order to receive of titanium tubing stocks
von: E. A. Drozd
Veröffentlicht: (2014)

Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)