Buchumschlag

Accounting for the reflectivity of the refractory metal deposit obtained by laser pyrolysis from the gas phase

Gespeichert in:

Bibliographische Detailangaben
Datum:	2009
Hauptverfasser:	A. V. Nedolja, I. N. Titov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2009
Schriftenreihe:	Physical surface engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000873033
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of laser radiation parameters on the formation of a metal microdeposition during laser-induced pyrolysis from the vapor phase
von: I. G. Velichko, et al.
Veröffentlicht: (2011)

The shape forming process of metallic sediment during laser pyrolytic deposition from gas phase on the dielectric substrate
von: E. V. Velichko, et al.
Veröffentlicht: (2008)

Coatings obtained by deposition of refractory compounds from flows of vacuum-arc metallical plasma
von: V. M. Beresnev, et al.
Veröffentlicht: (2003)

Modelling of Conditions of Existence of the Emitter of a Refractory Material During Cathodic Vacuum—Arc Deposition
von: V. D. Alimov, et al.
Veröffentlicht: (2014)

Reduced graphene oxide obtained using the spray pyrolysis technique for gas sensing
von: O. M. Slobodian, et al.
Veröffentlicht: (2019)

Reduced graphene oxide obtained using the spray pyrolysis technique for gas sensing
von: Slobodian, O.M., et al.
Veröffentlicht: (2019)

Deposition of refractory metal films with planar plasma ECR source
von: Fedorchenko, V.D., et al.
Veröffentlicht: (2007)

Determination of Conditions for Transition-Metals&#039; Deposition from Their Carbonyls by Means of the LCVD-Process Simulation
von: K. V. Kirpenko, et al.
Veröffentlicht: (2014)

ENVIRONMENTAL AND ENERGY ASSESSMENT OF THE FEASIBILITY OF OBTAINING ALTERNATIVE FUEL FROM PLASTIC WASTE BY PYROLYSIS
von: Boichenko, Serhii, et al.
Veröffentlicht: (2025)

The Process of Solid Carbon Deposition in the Course of Pyrolysis of Hydrocarbon Gases
von: K. V. Semejko, et al.
Veröffentlicht: (2015)

Installation for gas-phase deposition of materials
von: A. F. Korzh, et al.
Veröffentlicht: (2007)

Installation for gas-phase deposition of materials
von: Lonin, Yu.F., et al.
Veröffentlicht: (2004)

Study of melting at the phase-to-phase boundary &quot;slag - metal&quot; of easily fusible and refractory ferroalloys
von: G. A. Andrievskij
Veröffentlicht: (2013)

An original way to obtain porous Zn₍₁₋ₓ₎MgₓO thin films by spray pyrolysis technique
von: Abdelhakim Mahdjoub, et al.
Veröffentlicht: (2017)

Physicometallurgical aspects of obtaining high-quality tubes from the metal of gas-oxygen affinage
von: T. M. Buriak
Veröffentlicht: (2009)

Ecologicaland geochemical study soil deposits Novoraysk deposits of refractory clay after reclamation
von: E. V. Donchenko, et al.
Veröffentlicht: (2015)

Study of the pyrolysis products of automobile tires using two-dimensional gas chromatography
von: M. M. Hertsiuk, et al.
Veröffentlicht: (2011)

PYROLYSIS FURNACE OF CONTINUOUS COMBUSTION
von: Klyus , V., et al.
Veröffentlicht: (2024)

The Mechanism of Methane Pyrolysis (Review)
von: V. A. Bogomolov, et al.
Veröffentlicht: (2013)

Deposition of boron carbide coatings by gas-phase method
von: Yu. Zhuravlov, et al.
Veröffentlicht: (2019)

Morphology and spectral behavior of hydroxyapatite nanocrystalline coatings obtained by gas detonation deposition
von: Karbovskii, V.L., et al.
Veröffentlicht: (2012)

Properties of the hydroxyapatite coatings obtained by gas-detonation deposition onto titanium substrates
von: Klyui, N.I., et al.
Veröffentlicht: (2010)

Optimization of plasma-arc melting of ferroalloys from wastes of refractory and highlyreaction metals on dispersed substrate
von: V. N. Koleda, et al.
Veröffentlicht: (2013)

Prediction of the thermocyclic long-term strength of refractory metals and alloys
von: E. I. Uskov
Veröffentlicht: (2009)

Microstructure and fracture morphology of thermally sprayed refractory metals and ceramics
von: Kovarik, O., et al.
Veröffentlicht: (2008)

Mechanism of nitriding of molten metal, covered with slag, by nitrogen from the gas phase
von: V. V. Lakomskij, et al.
Veröffentlicht: (2011)

Investigation of the effect of refractory particles in slag on adhesion to refractories
von: E. N. Sigarev, et al.
Veröffentlicht: (2018)

Microwave diodes with contact metallization systems based on silicides, nitrides and borides of refractory metals
von: Boltovets, N.S., et al.
Veröffentlicht: (2000)

The pyrocarbon, gas phase densification of the catalytic carbon formations (CCFs), obtained on iron
von: Fursov, S.G., et al.
Veröffentlicht: (2023)

TORREFACTION OR PYROLYSIS OF BIOMASS. PROSPECTS FOR UKRAINE
von: Klyus , V., et al.
Veröffentlicht: (2025)

Corrosion resistance of composite coatings based on cobalt alloys with refractory metals
von: T. O. Nenastina, et al.
Veröffentlicht: (2020)

Modernization of optical microscope and its use to obtain digital images of microstructure of deposited metal
von: A. A. Babinets, et al.
Veröffentlicht: (2020)

Phase formation and crystallization of films deposited by pulse laser sputtering of chromium in oxygen atmosphere
von: Bagmut, A.G., et al.
Veröffentlicht: (2006)

The Statistical Analysis of Structure of the Metal Condensates Obtained by a Sputtering at Phase Equilibrium
von: A. I. Olemskoj, et al.
Veröffentlicht: (2012)

Gas-phase deposition of cavitation-resistant coatings based on boron carbide
von: Yu. Zhuravlov, et al.
Veröffentlicht: (2018)

The influence of introducing refractory compounds into the weld pool on the weld metal dendritic structure
von: V. V. Holovko, et al.
Veröffentlicht: (2020)

Computation and experimental evaluation of formation of primary structure in weld metal with refractory inoculants
von: Ju. Ermolenko, et al.
Veröffentlicht: (2017)

Mathematical model of plasma-induction process for growing single crystals of refractory metals
von: A. N. Gnizdylo, et al.
Veröffentlicht: (2018)

Influence of introduction of refractory particles to welding pool on structure and properties of weld metal
von: V. V. Holovko, et al.
Veröffentlicht: (2020)

Prospects and updating of plasma-induction technology of growing of refractory metal single crystals
von: A. N. Gnizdylo
Veröffentlicht: (2015)