Buchumschlag

Influence of selective laser melting process parameters on the microstructure formation

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
Hauptverfasser:	M. A. Latypova, S. L. Kuzmin, A. S. Yerzhanov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2023
Schriftenreihe:	Progress in Physics of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001462221
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Microstructure of Co-Cr dental alloys manufactured by casting and 3D selective laser melting
von: M. O. Vasylyev, et al.
Veröffentlicht: (2022)

Investigation of the Influence of Melt Stirring on the Formation of Macro- and Microstructures
von: A. G. Borisov
Veröffentlicht: (2014)

Microstructure of melted zone at multiplied laser pulses action
von: I. E. Gnatjuk, et al.
Veröffentlicht: (2003)

Problems and prospects of studying the processes of selective laser melting of materials for aerospace engineering (Review)
von: M. V. Sokolovskyi
Veröffentlicht: (2022)

Calculation of Residual Stresses under Selective Laser Melting of Powders
von: A. V. Gusarov, et al.
Veröffentlicht: (2013)

Influence of long-term soaking on the structure and properties of in625 alloy samples made by selective laser melting
von: N. O. Lysenko, et al.
Veröffentlicht: (2021)

Thermokinetic parameters of melt processing and structure formation of cast steel
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2018)

Influence of the parameters of the thermo-hour melt processing on the characteristics of the cast structure
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2017)

Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2022)

Influence of laser radiation parameters on the formation of a metal microdeposition during laser-induced pyrolysis from the vapor phase
von: I. G. Velichko, et al.
Veröffentlicht: (2011)

Study of the Material Quality of Samples Obtained by Selective Laser Melting (SLM) Method from IN718 Alloy Powder
von: V. V. Klochykhin, et al.
Veröffentlicht: (2021)

Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)

The Influence of Technological Parameters of the Lost Foam Casting Process on the Microstructure of Cast Iron Modified by Disperse Ferrosilicon in the Mold Cavity
von: I. A. Nebozhak, et al.
Veröffentlicht: (2020)

Influence of laser power and welding velocity on the microstructure of Zr-based bulk metallic glass welded joints
von: W. Haiyan, et al.
Veröffentlicht: (2019)

Selection of parameters of laser welding of thin-walled items from light alloys with nonthrough thickness penetration
von: V. M. Korzhyk, et al.
Veröffentlicht: (2022)

Features of formation of the microstructure and mechanical properties of steel 20, modified by nanoparticles, which was produced by electron beam melting
von: V. V. Pashynskyi, et al.
Veröffentlicht: (2022)

Investigation of deep penetration conditions when making samples from high-temperature alloy Inconel 718 by the method of selective laser melting
von: S. V. Adzhamskij, et al.
Veröffentlicht: (2019)

Coal microstructure influence on methane maintenance
von: E. V. Uljanova, et al.
Veröffentlicht: (2013)

Influence of the chemical nature of matrix polymer on the features of flowing and structure formation processes in polymer mixture melts
von: N. M. Rezanova, et al.
Veröffentlicht: (2015)

Influence of Melt Hydrogenation with Other Types of Processing on Formation and Quality of Castings from Aluminum Alloys
von: F. M. Kotljarskij
Veröffentlicht: (2019)

Influence of temporal parameters of laser irradiation on emission spectra of the evaporated material
von: Zabello, E., et al.
Veröffentlicht: (1999)

Formation of cast structure in relation to temperature and time parameters of melting and crystallization
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2019)

Melt instabilities on semiconductor surfaces induced by laser radiation
von: Bonchik, A.Yu., et al.
Veröffentlicht: (2000)

Influence of process and electrical parameters of ESS in current-supplying mould on electrode melting rate and penetration of base metal
von: V. G. Solovev, et al.
Veröffentlicht: (2018)

X-ray parameters of nanocrystalline microstructure titanium obtained by cryodeformation
von: Ju. M. Plotnikova, et al.
Veröffentlicht: (2016)

Dependence of the CdTe melting threshold on the pulse duration and wavelength of laser radiation and the parameters of non-equilibrium charge carriers
von: V. P. Veleshchuk, et al.
Veröffentlicht: (2017)

Peculiarities of melting of chromium filler depending on shape of laser emission pulse during welding and surfacing processes
von: G. A. Baevich, et al.
Veröffentlicht: (2015)

Dynamic stability of the process of turning nickel superalloys using a toolholder produced by selective laser sintering
von: O. A. Gutnichenko, et al.
Veröffentlicht: (2013)

Dependence of the CdTe melting threshold on the pulse duration and wavelength of laser radiation and the parameters of non-equilibrium charge carriers
von: V. P. Veleschuk, et al.
Veröffentlicht: (2017)

Localization of deformation in the process of large plastic deformations
von: M. A. Latypova, et al.
Veröffentlicht: (2022)

Investigation of interrelation of mechanical characteristics, microstructure and informative parameters of NDT
von: M. O. Karpash
Veröffentlicht: (2012)

The influence of the laser alloying conditions on the parameters of wear resistance of 12Kh17T steel
von: Z. A. Duriahina, et al.
Veröffentlicht: (2011)

Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
von: A. M. Stepanchuk, et al.
Veröffentlicht: (2018)

Selection of processing parameters for conversion coatings on high-strength aluminium alloys by cyclic voltammetry
von: L. Kwiatkowski, et al.
Veröffentlicht: (2014)

Selection of processing parameters for conversion coatings on high-strength aluminium alloys by cyclic voltammetry
von: Kwiatkowski, L., et al.
Veröffentlicht: (2014)

Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
von: Švec, P., et al.
Veröffentlicht: (2017)

Selection of parameters for the development of mineral deposits
von: A. O. Khorolskyi, et al.
Veröffentlicht: (2020)

Increasing the efficiency of the introduction of the disperse material into the melt under laser treatment conditions
von: A. M. Tymoshenko
Veröffentlicht: (2018)

Influence of purity on microstructure and strength characteristics of refrigable microcomposites
von: Azarenkov, N.A., et al.
Veröffentlicht: (2020)

Influence of nanoparticle&#039;s size on microstructure of oxide coatings
von: J. Korzekwa, et al.
Veröffentlicht: (2017)