Buchumschlag

A numerical evaluation of the temperature of a solidification point in ingot casting processes

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
1. Verfasser:	M. Zambrano
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2023
Schriftenreihe:	Mathematical Modeling and Computing
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001446004
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

A thermophysical ground of calculation programs of temperature fields in the time of solidification ingots and large castings with introduce to the melt cast shot
von: L. O. Sokolovskaja, et al.
Veröffentlicht: (2015)

Processes of crystallization and solidification of castings in single-casting molds
von: V. V. Jasjukov, et al.
Veröffentlicht: (2018)

Crystallization and solidification of casts in theTemperature field of hyperbolic type
von: V. Z. Tindjuk, et al.
Veröffentlicht: (2015)

ESR and modern approaches to control of solidification of large forge ingot
von: L. B. Medovar, et al.
Veröffentlicht: (2013)

Intensification of solidification processes for large iron-carbon alloy castings during Lost-foam process
von: I. A. Shalevskaja, et al.
Veröffentlicht: (2015)

Physique-technological aspects of solidification castings in the sandy mould
von: V. A. Mamishev, et al.
Veröffentlicht: (2014)

Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

The intensification of the heat sink by castings solidification in a mold with bulk by method of its fluidization
von: V. S. Doroshenko, et al.
Veröffentlicht: (2016)

Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)

About a choice of rational heat regimes cast of steel ingots with shot
von: L. A. Sokolovskaja
Veröffentlicht: (2013)

Physique-mathematical aspects of solidification castings the different geometry in the sandy mould
von: V. A. Mamishev, et al.
Veröffentlicht: (2014)

Control of casting solidification and cooling in silica sand moulds due to it fluidization
von: P. B. Kaljuzhnyj, et al.
Veröffentlicht: (2015)

Influence of structural condition aluminium melts in precrystallizing temperature area on processes of its solidification
von: H. P. Borysov, et al.
Veröffentlicht: (2013)

Thermophysical aspects of intensification for solidification of steel and cast iron castings in siliceous sand moulds. Announcement 3
von: V. A. Mamishev, et al.
Veröffentlicht: (2015)

Plasma arc technology for producing ingots and castings of titanium aluminide
von: V. A. Shapovalov, et al.
Veröffentlicht: (2012)

Quality of large- tonnage ingots in mould casting (Analytic review)
von: V. A. Shapovalov, et al.
Veröffentlicht: (2013)

Numerical simulation of thermal field in the casting process in relation to cast plasma technology
von: O. V. Shmatko
Veröffentlicht: (2018)

Kinetics of solidification of an alloy at a high intensity of heat and mass transfer of low-temperature forms
von: T. V. Lysenko, et al.
Veröffentlicht: (2018)

Research of the effect of the cooling rate during solidification of a continuously cast billet on the features of the dendritic structure of carbon steel
von: O. I. Babachenko, et al.
Veröffentlicht: (2020)

The system analysis of solidification Cast billets with Variable Crookedness of the borders Two-phase Zone
von: V. A. Mamishev
Veröffentlicht: (2014)

The applied aspects of rise quality castings in the time of solidification in the sandy moulds. Report 4
von: V. A. Mamishev, et al.
Veröffentlicht: (2015)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Supression of liquation processes in large ingots
von: V. A. Shapovalov, et al.
Veröffentlicht: (2015)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Influenced by of oscillation and parameters of oscillations of the moldon the surface quality of continuous casting ingots
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Construction electrical steelmaking plant for producing continuous casting round ingot in Dnepropetrovsk
von: Ju. Zhigljavskij, et al.
Veröffentlicht: (2011)

Modification of a Constant in magnetic field of the Cast structure of the multicomponent alloy systems based on al-Cu-Ce at pouring, Cooling and solidification
von: E. V. Seredenko, et al.
Veröffentlicht: (2014)

Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming
von: I. V. Korniets, et al.
Veröffentlicht: (2014)

On thermodynamic approach to the problem of solidification of a diluted binary melt
von: Kanischev, V.N.
Veröffentlicht: (2006)

Braze-welding with peening of weld metal during the process of its solidification
von: A. S. Pismennyj, et al.
Veröffentlicht: (2012)

The role of thermal properties of metallic and nonmetallic molds during the solidification of cast billets of different purposes. Message 1
von: V. A. Mamishev, et al.
Veröffentlicht: (2018)

A numerical-analytic method for three-point boundary-value problems
von: Ronto, M. I., et al.
Veröffentlicht: (1994)

Liquid Radioactive Solidification Technologies
von: V. A. Sviderskij, et al.
Veröffentlicht: (2019)

Modelling of the process of endogenous vibration treatment of ingots at crystallization
von: V. M. Shchehlov, et al.
Veröffentlicht: (2018)

The influence of the cooling regime and chemical composition on dendritic structure formation of the ingot and continuous cast billets
von: O. I. Babachenko, et al.
Veröffentlicht: (2015)

Numerical modelling of hydrodynamic and thermal processes at continuous twin-roll steel casting.
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2015)

Evaluation of materials` grain size by means of point processes
von: Ya. Kosarevych
Veröffentlicht: (2013)

Metal structure control during solidification
von: V. A. Shapovalov, et al.
Veröffentlicht: (2015)

Methods to control metal solidification in ESR
von: I. V. Protokovilov, et al.
Veröffentlicht: (2014)