Carbide steels. The types and the ways of their obtaining (Review)
Gespeichert in:
| Datum: | 2011 |
|---|---|
| 1. Verfasser: | O. M. Shevchenko |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2011
|
| Schriftenreihe: | Modern Problems in Physical Materials Science |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000578926 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Carbides transformations in obtaining a chromium carbide steel of the eutectic type
von: O. M. Shevchenko, et al.
Veröffentlicht: (2015)
von: O. M. Shevchenko, et al.
Veröffentlicht: (2015)
The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)
von: O. M. Shevchenko
Veröffentlicht: (2015)
Creation of chromium carbide steel with increased wear-resistance
von: O. M. Shevchenko, et al.
Veröffentlicht: (2012)
von: O. M. Shevchenko, et al.
Veröffentlicht: (2012)
Investigation of the structure of diamond-carbide plates obtained by different methods
von: L. P. Stasiuk, et al.
Veröffentlicht: (2016)
von: L. P. Stasiuk, et al.
Veröffentlicht: (2016)
Optical properties of silicon carbide obtained by direct ion deposition
von: Lopin, A.V., et al.
Veröffentlicht: (2006)
von: Lopin, A.V., et al.
Veröffentlicht: (2006)
Peculiarities of obtaining nanostructured silicon carbide particles from bamboo chips
von: D. K. Do, et al.
Veröffentlicht: (2014)
von: D. K. Do, et al.
Veröffentlicht: (2014)
Structure of titanium carbide hard metals obtained by electric discharge synthesis methods
von: E. V. Lipjan, et al.
Veröffentlicht: (2019)
von: E. V. Lipjan, et al.
Veröffentlicht: (2019)
Obtaining silicon carbide via chemical vapor, plasma-chemical and sublimation methods
von: Zhuravlov, А.Yu., et al.
Veröffentlicht: (2017)
von: Zhuravlov, А.Yu., et al.
Veröffentlicht: (2017)
Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)
Modelling of carbides and nitrides formation in microalloyed steel. Forecasting of influence of deviations of Al, Ti and Nb concentrations on carbides and nitrides precipitation in steel. Conferring 2
von: A. I. Trotsan, et al.
Veröffentlicht: (2014)
von: A. I. Trotsan, et al.
Veröffentlicht: (2014)
The influence of alloying on eutectic carbides nature in high-speed steels
von: A. A. Glotka, et al.
Veröffentlicht: (2018)
von: A. A. Glotka, et al.
Veröffentlicht: (2018)
Biological activity of apian extracts depending on the way of obtaining
von: Ju. Ermakova, et al.
Veröffentlicht: (2006)
von: Ju. Ermakova, et al.
Veröffentlicht: (2006)
Obtaining crystalline phases of tungsten carbide by the influence of atmospheric electric arc plasma on tungsten oxide
von: Ya. Pak, et al.
Veröffentlicht: (2021)
von: Ya. Pak, et al.
Veröffentlicht: (2021)
Prediction of Precipitation of Carbonitrides and Carbides in Microalloyed Steel, Using Thermodynamics Calculations
von: A. I. Trotsan, et al.
Veröffentlicht: (2013)
von: A. I. Trotsan, et al.
Veröffentlicht: (2013)
The behavior of alloyed carbides during austenitizing steel under rapid heatings
von: Yu. Volosevych
Veröffentlicht: (2015)
von: Yu. Volosevych
Veröffentlicht: (2015)
Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
Effect of buffer layer of porous silicon carbide on the interface with the oxide layer (review)
von: O. B. Okhrimenko
Veröffentlicht: (2012)
von: O. B. Okhrimenko
Veröffentlicht: (2012)
Structure and properties of welded joints of steel 20 modified by nanoparticles of tungsten carbide
von: Yu. Bilous, et al.
Veröffentlicht: (2022)
von: Yu. Bilous, et al.
Veröffentlicht: (2022)
Thermocyclic treatment (TCT) of metals - the way to obtain optimal structure and properties
von: O. N. Perkov, et al.
Veröffentlicht: (2019)
von: O. N. Perkov, et al.
Veröffentlicht: (2019)
Hazard of formation of carbides and σ-phase in welding of high-alloy chromiumnickel steels
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)
The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
von: S. V. Bobyr
Veröffentlicht: (2014)
von: S. V. Bobyr
Veröffentlicht: (2014)
Specific features of structure formation during sintering of carbide-steel with binder based on sludge of roller-bearing steel
von: G. A. Bagljuk, et al.
Veröffentlicht: (2014)
von: G. A. Bagljuk, et al.
Veröffentlicht: (2014)
Tribocorrosion of stainless steels (Review)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2010)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2010)
The influence of distribution of carbides wear on 110Kh18M-ShD (440S) steel
von: O. A. Hlotka, et al.
Veröffentlicht: (2017)
von: O. A. Hlotka, et al.
Veröffentlicht: (2017)
Dynamic tensile strength of ceramic-matrix composites of the BL group, which are obtained in the cBN–carbide–Al systems
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2024)
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2024)
The Ways and Mechanisms of Immigrants' Legal Status Obtaining in Ukraine
von: I. P. Maidanik
Veröffentlicht: (2022)
von: I. P. Maidanik
Veröffentlicht: (2022)
Manifestations of nephrotoxicity in HIV-infected, obtaining antituberculosis treatment (Review)
von: O. S. Yehorenko, et al.
Veröffentlicht: (2018)
von: O. S. Yehorenko, et al.
Veröffentlicht: (2018)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
Instrumental stamp steels for hot deformation (review)
von: K. O. Hohaiev, et al.
Veröffentlicht: (2016)
von: K. O. Hohaiev, et al.
Veröffentlicht: (2016)
Interlocutory judgment in administrative process as the way of judicial review
von: O. R. Ivasyn
Veröffentlicht: (2013)
von: O. R. Ivasyn
Veröffentlicht: (2013)
Isothermal Martensitic Transformation in a Tool Steel and Its Effect on Carbide Formation under Tempering
von: V. A. Sirosh, et al.
Veröffentlicht: (2014)
von: V. A. Sirosh, et al.
Veröffentlicht: (2014)
Structure and wear resistance at abrasive wear of deposited material, hardened with carbides of different types
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2015)
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2015)
Operational degradation of structural steels (A review)
von: O. I. Zvirko
Veröffentlicht: (2021)
von: O. I. Zvirko
Veröffentlicht: (2021)
Cast steel with adjustable austenitic transformation during operation, obtained by electroslag remelting
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2020)
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2020)
Applying of electroslag technologies for obtainment of tubular irregular-shaped billets (review)
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)
Electro-Chemical Production of Tungsten Oxide from Pseudo-Alloy Carbide Type WC-Co
von: H. H. Tulskyi, et al.
Veröffentlicht: (2019)
von: H. H. Tulskyi, et al.
Veröffentlicht: (2019)
Silicon carbide LED
von: Vlaskina, S.I.
Veröffentlicht: (2002)
von: Vlaskina, S.I.
Veröffentlicht: (2002)
Peculiarities of formation and properties of boron-chromium coatings, obtained on steels in lithium melt
von: V. V. Shyrokov, et al.
Veröffentlicht: (2010)
von: V. V. Shyrokov, et al.
Veröffentlicht: (2010)
Ways of updating the technology of induction surfacing of thin steel discs
von: Ch. V. Pulka, et al.
Veröffentlicht: (2015)
von: Ch. V. Pulka, et al.
Veröffentlicht: (2015)
Laser surface alloying of steel products (Review)
von: A. V. Bernatskij
Veröffentlicht: (2013)
von: A. V. Bernatskij
Veröffentlicht: (2013)
Ähnliche Einträge
-
Carbides transformations in obtaining a chromium carbide steel of the eutectic type
von: O. M. Shevchenko, et al.
Veröffentlicht: (2015) -
The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015) -
Creation of chromium carbide steel with increased wear-resistance
von: O. M. Shevchenko, et al.
Veröffentlicht: (2012) -
Investigation of the structure of diamond-carbide plates obtained by different methods
von: L. P. Stasiuk, et al.
Veröffentlicht: (2016) -
Optical properties of silicon carbide obtained by direct ion deposition
von: Lopin, A.V., et al.
Veröffentlicht: (2006)