Cover Image

Specific features of structure formation during sintering of carbide-steel with binder based on sludge of roller-bearing steel

Saved in:

Bibliographic Details
Date:	2014
Main Authors:	G. A. Bagljuk, N. A. Uskova, A. A. Mamonova, A. V. Bezdorozhev
Format:	Article
Language:	English
Published:	2014
Series:	Modern Problems in Physical Materials Science
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000824667
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Specific features of structure formation and adhesion properties of Fe—Ti—B—C coatings on porous iron alloys
by: N. A. Uskova, et al.
Published: (2012)

Development of hardening process of a wear-resistant carbide-titanium coating received on steel by an electrophoresis and ensure adhesion of the coating with the substrate
by: G. A. Bagljuk, et al.
Published: (2014)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
by: O. M. Moroz, et al.
Published: (2015)

The effect of ferrochrome content in the initial charge on the structure, mechanical and tribotechnical properties of Fe–Cr–C sintered carbide steel
by: Ye. S. Kyryliuk, et al.
Published: (2024)

Investigation of the formation during sintering diamond-carbide plates with activation additions
by: V. Z. Turkevych, et al.
Published: (2017)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)

The behavior of alloyed carbides during austenitizing steel under rapid heatings
by: Yu. Volosevych
Published: (2015)

Serviceability of roller 60X2M steel with surface nanostructure
by: V. I. Kyryliv, et al.
Published: (2016)

The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
by: S. V. Bobyr
Published: (2014)

The influence of alloying on eutectic carbides nature in high-speed steels
by: A. A. Glotka, et al.
Published: (2018)

Carbides transformations in obtaining a chromium carbide steel of the eutectic type
by: O. M. Shevchenko, et al.
Published: (2015)

Structure and properties of sintered manganese steels with different carbon contents
by: H. A. Bahliuk, et al.
Published: (2010)

Carbide steels. The types and the ways of their obtaining (Review)
by: O. M. Shevchenko
Published: (2011)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
by: Ya. Z. Aygьzer, et al.
Published: (2021)

Modelling of carbides and nitrides formation in microalloyed steel. Forecasting of influence of deviations of Al, Ti and Nb concentrations on carbides and nitrides precipitation in steel. Conferring 2
by: A. I. Trotsan, et al.
Published: (2014)

Prospects of use steel strengthened by VN for slab caster rollers instead of 25Kh1M1F steel
by: I. F. Kirchu, et al.
Published: (2015)

Specific Features of the Formation of Structural Heterogeneity in Carbon Steel Depending on Manufacturing Technique
by: O. I. Babachenko, et al.
Published: (2023)

Creation of chromium carbide steel with increased wear-resistance
by: O. M. Shevchenko, et al.
Published: (2012)

The structure of the chromium carbide steel that obtained by hot pressing
by: O. M. Shevchenko
Published: (2015)

Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
by: A. M. Stepanchuk, et al.
Published: (2018)

Prediction of Precipitation of Carbonitrides and Carbides in Microalloyed Steel, Using Thermodynamics Calculations
by: A. I. Trotsan, et al.
Published: (2013)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
by: V. V. Ivzhenko, et al.
Published: (2021)

Effect of aluminum fluoride on the phase composition, lattice parameters borated carbon steels
by: A. A. Mamonova
Published: (2011)

Modeling of the thermal state of a high pressure apparatus cell during the sintering of large-sized carbide boron products
by: V. A. Dutka, et al.
Published: (2019)

Plasma-arc remelting of ShKh15 bearing steel
by: V. O. Shapovalov, et al.
Published: (2021)

Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
by: V. A. Dutka, et al.
Published: (2020)

cBN based materials with TiN-Al binder phase: sintering, structure, properties
by: K. V. Slipchenko, et al.
Published: (2019)

Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
by: A. Falkowska, et al.
Published: (2015)

The classification of mining systems of sludges from sludge storage
by: O. A. Bubnova
Published: (2017)

Peculiarities of formation of wear-resistant titanium carbide coatings by the method of electrophoretic deposition
by: H. A. Bahliuk, et al.
Published: (2015)

Effect of different binder phases on the Σ2 grain boundary plane distribution in cemented carbides
by: Xiaokun Yuan
Published: (2019)

Specific Boundaries in Ferrite of Low-Carbon Steels
by: G. D. Sukhomlin
Published: (2013)

Study sintering conditions of mechanically activated powders based on copper
by: O. V. Vlasova, et al.
Published: (2014)

The structure, physical-mechanical and frictional properties of Fe - Sі - B - C system sintered steels
by: H. A. Bahliuk, et al.
Published: (2013)

Features of steel and slag mixing in a ladle during argon stirring
by: O. M. Smirnov, et al.
Published: (2009)

Features of microalloying with boron during smelting of low-alloy structural steels
by: Ju. Nazjuta, et al.
Published: (2018)

Features of dislocation structure formation during cyclic loading of the construction steel of bainite class
by: N. E. Pohrebna, et al.
Published: (2017)

Cast steel with adjustable austenitic transformation during operation, obtained by electroslag remelting
by: O. M. Sydorchuk, et al.
Published: (2020)

The influence of distribution of carbides wear on 110Kh18M-ShD (440S) steel
by: O. A. Hlotka, et al.
Published: (2017)