Buchumschlag

Influence of 12Kh18N10T steel fibers beam pressing on their structures and properties

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	V. A. Zorin, Ju. F. Lugovskoj, V. A. Nazarenko, S. A. Spiridonov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Modern Problems in Physical Materials Science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000824679
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of deformational impact on 08Kh18N9 and 12Kh18N10T steels in welded vessels and pipes
von: L. M. Lobanov, et al.
Veröffentlicht: (2015)

The influence of water environment on weld metal gas saturation in underwater welding of 12Kh18N10T steel
von: Yu. Kakhovskyi
Veröffentlicht: (2015)

Corrosion-fatigue strength of T-joints of steel 12Kh18N10T and methods of its improvement
von: E. V. Kolomijtsev
Veröffentlicht: (2012)

Physicomechanical properties of 12Kh21N5T and 08Kh18N10T steels irradiated by a high-current tubular relativistic electron beam in ablation mode
von: V. V. Belozerov, et al.
Veröffentlicht: (2011)

Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

The influence of preliminary plastic deformation of 12Kh18N12T steel on its mechanical characteristics
von: O. I. Balytskyi, et al.
Veröffentlicht: (2011)

Titanium-aluminide coatings on steel 12Kh18N10T with a barrier layer of titanium nitride
von: M. V. Arshuk, et al.
Veröffentlicht: (2011)

Welds formation in electron beam welding of heat resistant steels of grades 10Kh9MFBA and 10Kh12M
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2013)

Electroslag processing of Kh18N10T stainless steel shavings
von: O. V. Veretilnyk, et al.
Veröffentlicht: (2024)

Mechanical properties of joints of heat-resistant steels of 10Kh12M, 10Kh9MFBA grades made by electron beam welding
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2013)

The influence of the external polarization potential on tribo-corrosion behavior of 08Kh18N10T steel
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2018)

Investigation of acoustic emission characteristics of 12Kh18N10T steel at the temperature of 560° C. Information 2. Damageability and fracture prediction
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)

Influence of TiN coating on titanium and aluminum saturation steel 12X18H10T
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2011)

Laser welding of thin-wall filter elements of steel 08Kh18N10T
von: V. D. Sheljagin, et al.
Veröffentlicht: (2017)

The influence of thermal resistance of lubricating-cooling liquids on 12Kh18AH18Sh steel machining
von: O. I. Balytskyi, et al.
Veröffentlicht: (2016)

Investigation of acoustic-emission characteristics of steel 12Kh18N10T at the temperature of 560 oC. Information 1. Methods and some results
von: Ja. Nedoseka, et al.
Veröffentlicht: (2011)

Influence of laser alloying modes to the wear resistance parameters of 12H18N10T steel surface layer
von: Z. A. Duriahina, et al.
Veröffentlicht: (2013)

Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

The influence of chemical heat treatment in checked gas environments on heat-resistance of 12Kh18AH18Sh steel
von: V. M. Fedirko, et al.
Veröffentlicht: (2016)

Heat resistance steel titanoalitirovannoy 12X18H10T
von: M. V. Arshuk, et al.
Veröffentlicht: (2012)

The influence of feed-water parameters of WMR-1000 reactors on corrosion-electrochemical behavior of 08Kh18N10T steel
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2014)

The influence of cyclic processing on phase composition of ion-nitrided surface layersof 12X18H10T steel
von: Z. A. Duriahina, et al.
Veröffentlicht: (2012)

The microstructure of austenitic 18Kh18N10T steel mechanically alloyed with of Y2O3–ZrO2 nano-oxides
von: S. V. Starostenko, et al.
Veröffentlicht: (2015)

The Formation of Nanoscale Coating on the 12Cr18Ni10Ti Steel During Ion Implantation
von: V. A. Zazhigalov, et al.
Veröffentlicht: (2014)

Non-metallic inclusions in 08Kh18N10T steel as a cause of defects in the heat exchange tubes of NPP steam generators
von: V. M. Voievodin, et al.
Veröffentlicht: (2019)

The influence of the laser alloying conditions on the parameters of wear resistance of 12Kh17T steel
von: Z. A. Duriahina, et al.
Veröffentlicht: (2011)

Improvement of the technology of producing extended composite transition pieces of Steel 20 - Steel 08KH18N10T made by the method of hot screw rolling in vacuum
von: B. V. Borts, et al.
Veröffentlicht: (2017)

Evaluation of stressstrain state of dissimilar welded joints of steels 10Kh13G18D+09G2S
von: A. I. Gedrovich, et al.
Veröffentlicht: (2010)

Diffusion chromoaluminizing 12X18H10T steel with a pre-formed layer of titanium nitride
von: M. V. Arshuk, et al.
Veröffentlicht: (2011)

The influence of distribution of carbides wear on 110Kh18M-ShD (440S) steel
von: O. A. Hlotka, et al.
Veröffentlicht: (2017)

Исследования захвата дейтерия в нержавеющих сталях 06Х18Н10, 08Х18Н10Т и 12Х18Н10Т
von: Карпов, С.А., et al.
Veröffentlicht: (2005)

On the practical application of the 18Cr10NiTi steel after barocryodeformation
von: P. A. Khajmovich
Veröffentlicht: (2016)

Automatic submerged arc welding of bridge spans of high-quality steels 10KhSNDA and 15KhSNDA in field
von: D. P. Cheprasov, et al.
Veröffentlicht: (2018)

Structure and properties of austenitic ODS steel 08Cr18Ni10Ti
von: Velikodnyi, A.N., et al.
Veröffentlicht: (2014)

The physico-mechanical properties of metal at electroslag hard-facing of steel 45KhN with steel 20KhN3A
von: E. N. Parakhnevich
Veröffentlicht: (2013)

Computer assessing the variation of grain size of the exploited 12Kh1MF steel structure
von: I. M. Zhuravel
Veröffentlicht: (2019)

Vacuum Activated Diffusion Chromium Plating of 15Kh12VNMF and 20Kh1M1F1TR Steels
von: S. G. Rudenki, et al.
Veröffentlicht: (2022)

The influence of lubricating liquid on formation of cutting products of 38KhN3MFA steel
von: O. I. Balytskyi, et al.
Veröffentlicht: (2018)

Thermal conductivity of hot-pressed AlB12–AlN ceramic composite
von: T. O. Prikhna, et al.
Veröffentlicht: (2024)

Potentials of interaction of 10,11,12,13B isotopes with 12C
von: Yu. Mezhevych, et al.
Veröffentlicht: (2022)