Influence of 12Kh18N10T steel fibers beam pressing on their structures and properties
Saved in:
| Date: | 2014 |
|---|---|
| Main Authors: | , , , |
| Format: | Article |
| Language: | English |
| Published: |
2014
|
| Series: | Modern Problems in Physical Materials Science |
| Online Access: | http://jnas.nbuv.gov.ua/article/UJRN-0000824679 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASSimilar Items
Investigation of deformational impact on 08Kh18N9 and 12Kh18N10T steels in welded vessels and pipes
by: L. M. Lobanov, et al.
Published: (2015)
by: L. M. Lobanov, et al.
Published: (2015)
Influence of different types of hydrogen treatment on hydrogen retention and release from 12Kh18N10T steel
by: Bondarenko, M.N., et al.
Published: (2018)
by: Bondarenko, M.N., et al.
Published: (2018)
The influence of water environment on weld metal gas saturation in underwater welding of 12Kh18N10T steel
by: Yu. Kakhovskyi
Published: (2015)
by: Yu. Kakhovskyi
Published: (2015)
Corrosion-fatigue strength of T-joints of steel 12Kh18N10T and methods of its improvement
by: E. V. Kolomijtsev
Published: (2012)
by: E. V. Kolomijtsev
Published: (2012)
The influence of preliminary plastic deformation of 12Kh18N12T steel on its mechanical characteristics
by: O. I. Balytskyi, et al.
Published: (2011)
by: O. I. Balytskyi, et al.
Published: (2011)
Physicomechanical properties of 12Kh21N5T and 08Kh18N10T steels irradiated by a high-current tubular relativistic electron beam in ablation mode
by: V. V. Belozerov, et al.
Published: (2011)
by: V. V. Belozerov, et al.
Published: (2011)
Diffusion vacuum welding of intemetallic alloy γ-TiAl with steel 12Kh18N10T
by: G. K. Kharchenko, et al.
Published: (2012)
by: G. K. Kharchenko, et al.
Published: (2012)
Titanium-aluminide coatings on steel 12Kh18N10T with a barrier layer of titanium nitride
by: M. V. Arshuk, et al.
Published: (2011)
by: M. V. Arshuk, et al.
Published: (2011)
Welds formation in electron beam welding of heat resistant steels of grades 10Kh9MFBA and 10Kh12M
by: V. M. Nesterenkov, et al.
Published: (2013)
by: V. M. Nesterenkov, et al.
Published: (2013)
Electroslag processing of Kh18N10T stainless steel shavings
by: O. V. Veretilnyk, et al.
Published: (2024)
by: O. V. Veretilnyk, et al.
Published: (2024)
The influence of the external polarization potential on tribo-corrosion behavior of 08Kh18N10T steel
by: V. I. Pokhmurskyi, et al.
Published: (2018)
by: V. I. Pokhmurskyi, et al.
Published: (2018)
Mechanical properties of joints of heat-resistant steels of 10Kh12M, 10Kh9MFBA grades made by electron beam welding
by: V. M. Nesterenkov, et al.
Published: (2013)
by: V. M. Nesterenkov, et al.
Published: (2013)
Investigation of acoustic emission characteristics of 12Kh18N10T steel at the temperature of 560° C. Information 2. Damageability and fracture prediction
by: Ja. Nedoseka, et al.
Published: (2014)
by: Ja. Nedoseka, et al.
Published: (2014)
Laser welding of thin-wall filter elements of steel 08Kh18N10T
by: V. D. Sheljagin, et al.
Published: (2017)
by: V. D. Sheljagin, et al.
Published: (2017)
The influence of thermal resistance of lubricating-cooling liquids on 12Kh18AH18Sh steel machining
by: O. I. Balytskyi, et al.
Published: (2016)
by: O. I. Balytskyi, et al.
Published: (2016)
Influence of TiN coating on titanium and aluminum saturation steel 12X18H10T
by: V. H. Khyzhniak, et al.
Published: (2011)
by: V. H. Khyzhniak, et al.
Published: (2011)
Investigation of acoustic-emission characteristics of steel 12Kh18N10T at the temperature of 560 oC. Information 1. Methods and some results
by: Ja. Nedoseka, et al.
Published: (2011)
by: Ja. Nedoseka, et al.
Published: (2011)
Influence of laser alloying modes to the wear resistance parameters of 12H18N10T steel surface layer
by: Z. A. Duriahina, et al.
Published: (2013)
by: Z. A. Duriahina, et al.
Published: (2013)
The influence of chemical heat treatment in checked gas environments on heat-resistance of 12Kh18AH18Sh steel
by: V. M. Fedirko, et al.
Published: (2016)
by: V. M. Fedirko, et al.
Published: (2016)
Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling
by: V. I. Makhnenko, et al.
Published: (2012)
by: V. I. Makhnenko, et al.
Published: (2012)
The influence of feed-water parameters of WMR-1000 reactors on corrosion-electrochemical behavior of 08Kh18N10T steel
by: V. I. Pokhmurskyi, et al.
Published: (2014)
by: V. I. Pokhmurskyi, et al.
Published: (2014)
Heat resistance steel titanoalitirovannoy 12X18H10T
by: M. V. Arshuk, et al.
Published: (2012)
by: M. V. Arshuk, et al.
Published: (2012)
The influence of cyclic processing on phase composition of ion-nitrided surface layersof 12X18H10T steel
by: Z. A. Duriahina, et al.
Published: (2012)
by: Z. A. Duriahina, et al.
Published: (2012)
The microstructure of austenitic 18Kh18N10T steel mechanically alloyed with of Y2O3–ZrO2 nano-oxides
by: S. V. Starostenko, et al.
Published: (2015)
by: S. V. Starostenko, et al.
Published: (2015)
Non-metallic inclusions in 08Kh18N10T steel as a cause of defects in the heat exchange tubes of NPP steam generators
by: V. M. Voievodin, et al.
Published: (2019)
by: V. M. Voievodin, et al.
Published: (2019)
The influence of the laser alloying conditions on the parameters of wear resistance of 12Kh17T steel
by: Z. A. Duriahina, et al.
Published: (2011)
by: Z. A. Duriahina, et al.
Published: (2011)
The Formation of Nanoscale Coating on the 12Cr18Ni10Ti Steel During Ion Implantation
by: V. A. Zazhigalov, et al.
Published: (2014)
by: V. A. Zazhigalov, et al.
Published: (2014)
Improvement of the technology of producing extended composite transition pieces of Steel 20 - Steel 08KH18N10T made by the method of hot screw rolling in vacuum
by: B. V. Borts, et al.
Published: (2017)
by: B. V. Borts, et al.
Published: (2017)
The influence of distribution of carbides wear on 110Kh18M-ShD (440S) steel
by: O. A. Hlotka, et al.
Published: (2017)
by: O. A. Hlotka, et al.
Published: (2017)
Evaluation of stressstrain state of dissimilar welded joints of steels 10Kh13G18D+09G2S
by: A. I. Gedrovich, et al.
Published: (2010)
by: A. I. Gedrovich, et al.
Published: (2010)
Formation of plastic properties of 12Cr18Ni10Ti steel highly irradiated by neutrons
by: Maksimkin, О.P., et al.
Published: (2021)
by: Maksimkin, О.P., et al.
Published: (2021)
Diffusion chromoaluminizing 12X18H10T steel with a pre-formed layer of titanium nitride
by: M. V. Arshuk, et al.
Published: (2011)
by: M. V. Arshuk, et al.
Published: (2011)
Исследования захвата дейтерия в нержавеющих сталях 06Х18Н10, 08Х18Н10Т и 12Х18Н10Т
by: Карпов, С.А., et al.
Published: (2005)
by: Карпов, С.А., et al.
Published: (2005)
Automatic submerged arc welding of bridge spans of high-quality steels 10KhSNDA and 15KhSNDA in field
by: D. P. Cheprasov, et al.
Published: (2018)
by: D. P. Cheprasov, et al.
Published: (2018)
On the practical application of the 18Cr10NiTi steel after barocryodeformation
by: P. A. Khajmovich
Published: (2016)
by: P. A. Khajmovich
Published: (2016)
The physico-mechanical properties of metal at electroslag hard-facing of steel 45KhN with steel 20KhN3A
by: E. N. Parakhnevich
Published: (2013)
by: E. N. Parakhnevich
Published: (2013)
Helium release from 12Cr18Ni10Ti stainless steel after impact of steady-state glow discharge helium plasma
by: Glazunov, G.P., et al.
Published: (2021)
by: Glazunov, G.P., et al.
Published: (2021)
The influence of lubricating liquid on formation of cutting products of 38KhN3MFA steel
by: O. I. Balytskyi, et al.
Published: (2018)
by: O. I. Balytskyi, et al.
Published: (2018)
Structure and properties of austenitic ODS steel 08Cr18Ni10Ti
by: Velikodnyi, A.N., et al.
Published: (2014)
by: Velikodnyi, A.N., et al.
Published: (2014)
Computer assessing the variation of grain size of the exploited 12Kh1MF steel structure
by: I. M. Zhuravel
Published: (2019)
by: I. M. Zhuravel
Published: (2019)