Buchumschlag

Flotation separation as a method of improving the uniformity of synthetic diamond powders according to their morphometric characteristics, grain shape and grain composition

Gespeichert in:

Bibliographische Detailangaben
Datum:	2024
Hauptverfasser:	G. A. Petasyuk, H. D. Ilnytska, G. A. Bazalii, N. O. Oleinyk, Yu. V. Syrota
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2024
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001489949
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
von: H. A. Petasiuk, et al.
Veröffentlicht: (2017)

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
von: H. A. Petasiuk, et al.
Veröffentlicht: (2022)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
von: H. A. Petasiuk, et al.
Veröffentlicht: (2019)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
von: H. A. Petasiuk, et al.
Veröffentlicht: (2023)

Indirect determination of the thickness of the coating of synthetic diamond powders using new 3D models of their grain
von: H. A. Petasiuk
Veröffentlicht: (2021)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2018)

Expansion of the applied capabilities of the search-analog method for identifying the shape of the projection of abrasive powders grains
von: H. A. Petasiuk, et al.
Veröffentlicht: (2021)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Analytical determination of the number of grains in a carat of diamond powder using an extrapolation–affine 3D model of a grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2012)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
von: V. V. Smokvyna, et al.
Veröffentlicht: (2023)

The homogeneity of abrasive powders by the shape-similarity of the projection of the grains and the method of its determination
von: H. A. Petasiuk, et al.
Veröffentlicht: (2020)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

A study of the tendency and extent of variation of morphometric characteristics of standard synthetic diamond grits in a continuous series of their grades and sizes
von: H. A. Petasiuk, et al.
Veröffentlicht: (2018)

Synthetic-hydroxyapatite-based coatings on the ultrafine-grained titanium and zirconium surface
von: A. T. Turdaliev, et al.
Veröffentlicht: (2023)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

Grain shape as a factor governing the parameters of diamond electroplated coating of dressing tools. Part 2. Actual grain–graphite form contact area and related characteristics as input data for calculating the conditions of diamond electroplated coatin
von: M. N. Shejko, et al.
Veröffentlicht: (2016)

On theoretical substantiation of the choice of effective grain profile shape in modeling of diamond layer in dressing tools. Part 2. Electroforming
von: M. N. Shejko
Veröffentlicht: (2017)

On theoretical substantiation of the choice of effective grain profile shape in modeling of diamond layer in dressing tools. Part 1. Electroplating
von: M. N. Shejko
Veröffentlicht: (2016)

Effect of volume defects and surface defects on the separation of synthetic diamonds in magnetic and electric fields
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2016)

Flotation enrichment of resistant gold ores
von: G. Askarova, et al.
Veröffentlicht: (2020)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Grain shape as a factor governing the parameters of diamond electroplated coating of dressing tools. Part 3. The simplest 3D model of a diamond grain – &quot;A barrel made of parabolic and circular staves&quot;
von: M. N. Shejko
Veröffentlicht: (2016)

Determination of oxides intended for surface modification of diamond grains by their functional characteristics
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2020)

Composite scintillators based on organic grains and their pulse shape discrimination capability
von: Khromiuk, I.F., et al.
Veröffentlicht: (2022)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Grain shape as a factor governing the parameters of diamond electroplated coating of dressing tools. Part 1. The tool body dimensional allowance to accommodate diamond electroplated coating
von: M. N. Shejko, et al.
Veröffentlicht: (2015)

Study of the effect of matching the actual geometric parameters of the grain and its adopted 3D model on the error of determining the thickness of the coating of diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2023)

A system-analogue method of identification of geometric shape of the abrasive grain projection
von: H. A. Petasiuk
Veröffentlicht: (2016)

Grain Boundary Diffusion with Simultaneous Chemical Interaction in Grain Boundary
von: Petelin, A.L., et al.
Veröffentlicht: (2013)

Analysis of the grain value and grain diameter in the study of the metallic structures
von: T. P. Danilenko
Veröffentlicht: (2014)

Grain Boundary Diffusion with Simultaneous Chemical Interaction in Grain Boundary
von: A. L. Petelin, et al.
Veröffentlicht: (2013)

Formation of crystal stock in the process of the plate shape for type Ib large synthetic diamond single crystals
von: G. Gao, et al.
Veröffentlicht: (2020)

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

Study of the constitutive model of columnar-grained Cu₇₁Al₁₈Mn₁₁ shape memory alloy
von: Liu Wei, et al.
Veröffentlicht: (2018)

Grain from Medjybizh
von: S. A. Horbanenko, et al.
Veröffentlicht: (2019)

Grain Growing of the Siverians
von: S. A. Horbanenko
Veröffentlicht: (2014)

A new group averaging approach to diagnostics of technological properties of high-strength synthetic diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2022)

Statistical analysis of compression strength of single grains of SHM powders and improvement of the strength assessment procedure
von: Ju. V. Sirota, et al.
Veröffentlicht: (2013)

Computer modeling of the relay mechanism of transfer of plastic flow from grain to grain
von: E. M. Borisovskaja, et al.
Veröffentlicht: (2017)