Cover Image

The effect of eccentric tension on the corrosion-fatigue resistance of pump rods

Saved in:

Bibliographic Details
Date:	2024
Main Authors:	H. V. Krechkovska, Ya. T. Fedorovych, B. V. Kopei, V. V. Mykhailiuk
Format:	Article
Language:	English
Published:	2024
Series:	Materials Science (Physicochemical mechanics of materials)
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001508522
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Regularities of crack propagation in hybrid pumping rods
by: B. V. Kopei, et al.
Published: (2021)

Increase of fatigue strength of pumping rods with treatment by a special technological environment
by: B. V. Kopei, et al.
Published: (2020)

Fatigue strength of hybride sucker rods
by: B. V. Kopei, et al.
Published: (2018)

Corrosion-fatigue crack growth in 20N2M steel operating pump rods
by: N. V. Kret, et al.
Published: (2020)

Modeling the Process of Damage of Rods owing to Multi-cycle Fatigue in Conditions of Tension-Compression
by: Yu. M. Kobzar
Published: (2022)

The corrosion and wear-resistant steels for pumps
by: V. P. Havryliuk, et al.
Published: (2010)

Influence of structure of hafnium rods on their mechanical properties, corrosion and radiation resistances
by: V. A. Zuyok, et al.
Published: (2020)

State-of-the-art of methods for improvement of corrosion resistance and corrosion fatigue resistance of welded joints (Review)
by: S. A. Solovej
Published: (2017)

Effect of Hydrogen, Hydride Orientation and Temperature on Low-Cycle Fatigue Resistance of Zr-1%Nb Fuel Rod Claddings
by: G. Riedkina, et al.
Published: (2021)

Effect of heat treatment, microalloying with boron and ageing treatment on the work of fracture of wire rod under tension
by: V. V. Parusov, et al.
Published: (2013)

Calculation of sucker-rod oil pump functioning parameters
by: A. V. Maliar, et al.
Published: (2013)

Corrosion-fatigue crack growth resistance of clamp-forming machine boom carriage
by: L. K. Polishchuk, et al.
Published: (2015)

Corrosion fatigue crack growth resistance of steel for boom sprayers frame
by: A. M. Syrotiuk, et al.
Published: (2020)

Objective technical monitoring of the condition of the sucker rod pumping unit
by: Lopatin, V.V.
Published: (2018)

Objective technical monitoring of the condition of the sucker rod pumping unit
by: V. V. Lopatin
Published: (2018)

Assessment of the corrosion resistance of the main alternative materials for light water reactors tolerant fuel rod cladding
by: Zuyok, V., et al.
Published: (2022)

Improvement of fatigue and corrosion resistance of welded joints by ultrasonic peening treatment and spark alloying
by: G. I. Prokopenko, et al.
Published: (2014)

Models of Long-Term Brittle Fracture of Rods under Tension and Compression in Condition of Creep
by: Ju. M. Kobzar
Published: (2017)

The influence of plant extracts on corrosion and corrosion-fatigue fracture of steel in tap water
by: Z. V. Slobodian, et al.
Published: (2016)

Comparison on energy of the imabalance and the inertial–eccentric drives
by: V. P. Franchuk, et al.
Published: (2017)

The influence of phase composition of deposited layers of hydrocylinder rods on their local corrosion
by: A. A. Holiakevych, et al.
Published: (2014)

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
by: T. Lagoda, et al.
Published: (2017)

Strength and corrosion-fatigue crack growth resistance of Ti–Nb–Zr–Si alloys of biomedical application
by: O. P. Ostash, et al.
Published: (2019)

The influence of corrosion on the effective resistance of amperometric sensors
by: O. I. Buket, et al.
Published: (2014)

Acoustic-emission diagnostics of corrosion damages of materials (A review). P. 1. Detection of electrochemical corrosion and corrosion fatigue
by: V. R. Skalskyi, et al.
Published: (2017)

Adsorption-electrochemical theory of corrosion fatigue of metals
by: V. I. Pokhmurskyi
Published: (2010)

Corrosion fatigue fracture of steels of railway wheels
by: I. M. Andreiko, et al.
Published: (2011)

Effect of stress concentration on the fatigue and corrosion-fatigue properties of cast aluminum VAL10 and forced aluminum AK6 alloys
by: Karlashov, A.V., et al.
Published: (1985)

Increasing the fretting-corrosion fatigue of press joints in sea water
by: V. I. Babinets, et al.
Published: (2021)

Effect of the disinfectant solution on corrosion resistance of dental instrument
by: T. L. Tepla, et al.
Published: (2018)

ELECTROMAGNETIC VIBRATION DISTURBING FORCES AT THE ECCENTRICITY OF ROTOR OF TURBOGENERATOR
by: Vaskovskyi, Yu. M., et al.
Published: (2016)

On Stabilization of Translational Motions by Rotation of Eccentric Balance Wheel
by: A. S. Khoroshun
Published: (2018)

On the role of crystallographic texture under corrosion of hot-drawn carbon steel rods
by: N. M. Shkatuliak, et al.
Published: (2012)

The influence of high-frequency peening on corrosion fatigue of welded joints
by: V. V. Knysh, et al.
Published: (2017)

Effect of vibrotreatment on fatigue resistance and damping capacity of structural elements with residual stresses
by: V. A. Degtjarev
Published: (2017)

Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
by: Xua, L., et al.
Published: (2019)

Single-fase direct current machine with eccentric magnetic system of the rotor
by: A. E. Antonov, et al.
Published: (2013)

Development of a mathematical model for computation of permissible operating parameters of the sucker-rod pump variable-frequency drive
by: A. V. Maliar, et al.
Published: (2020)

Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
by: Dahmani, L., et al.
Published: (2015)

Effect of external electromagnetic field on corrosion fatigue of duplex stainless steel 2205 welded joints
by: O. L. Bilyy, et al.
Published: (2020)