Cover Image

Study of the impact of crack resistance parameters on the critical load of a specimen with a mode I crack under three-point bending in the framework of the cohesive zone model

Saved in:

Bibliographic Details
Date:	2024
Main Authors:	V. L. Bogdanov, D. M. Selivanov
Format:	Article
Language:	English
Published:	2024
Series:	Reports of the National Academy of Sciences of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001506224
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Cohesive zone length influence on the critical load for a body with mode I crack
by: A. O. Kaminskyi, et al.
Published: (2018)

A model of crack with cohesive zone for a mixed mode of fracture
by: M. F. Selivanov
Published: (2015)

An edge crack with cohesive zone
by: M. F. Selivanov
Published: (2019)

An edge crack with cohesive zone in the orthotropic body
by: M. F. Selivanov
Published: (2019)

Comparison of the crack opening displacement determination algorithms for a cohesive crack
by: M. F. Selivanov, et al.
Published: (2017)

Comparison of two potential-based cohesive models to predict the critical load of a finite orthotropic plate with oblique crack
by: M. F. Selivanov, et al.
Published: (2020)

Determination of the safe crack length and the cohesive traction distribution using the model of a crack with prefracture zone
by: M. F. Selivanov
Published: (2014)

Application of the complex cohesive zone model to the edge mixed-mode crack problem for orthotropic media
by: M. F. Selivanov, et al.
Published: (2019)

Solving a problem on an edge crack with cohesive zone by the regularization of a singular integral equation
by: M. F. Selivanov
Published: (2019)

Modeling the slow cohesive crack growth in viscoelastic solids
by: A. O. Kaminskyi, et al.
Published: (2015)

Solving the problem on the subcritical state of an edge crack within the cohesive zone model approach
by: M. F. Selivanov, et al.
Published: (2022)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
by: Haeri, H.
Published: (2015)

Cohesive model of a prefracture zone near the tip of the crack outcoming from the corner point of the broken interface
by: A. O. Kaminskyi, et al.
Published: (2019)

About the cohesive pre-fracture zone at the tip of a crack outcoming from the corner point of the broken interface of materials
by: A. O. Kaminskyi, et al.
Published: (2020)

The impact of neglecting the smooth crack closure condition when determining the critical load
by: M. F. Selivanov, et al.
Published: (2020)

Modeling Crack Initiation in a Composite Under Bending
by: Hasanov, Sh. G.
Published: (2018)

Modeling Crack Initiation in a Composite Under Bending
by: Hasanov, Sh. G.
Published: (2018)

Modeling Crack Initiation in a Composite Under Bending
by: Sh. G. Hasanov
Published: (2018)

The cohesive zone model with a non-uniform traction – separation law for a system of several collinear cracks
by: M. F. Selyvanov, et al.
Published: (2018)

Stress state of the shell of double curvature with two collinear cracks under bending loading
by: K. M. Dovbnia, et al.
Published: (2014)

Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
by: Jameel, Azher, et al.
Published: (2016)

Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)

Slow growth of a crack with contact zone
by: A. O. Kaminskyi, et al.
Published: (2017)

Evaluation of the stress intensity factor for transverse shear cracks in a beam specimen
by: P. S. Kun, et al.
Published: (2014)

Solution of the periodic problem about cohesive cracks development under longitudinal shear
by: V. M. Mirsalimov, et al.
Published: (2013)

Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
by: Yang, B., et al.
Published: (2018)

Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
by: Rozumek, D., et al.
Published: (2010)

Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
by: D. Rozumek, et al.
Published: (2010)

Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
by: D. Rozumek, et al.
Published: (2017)

Stress state of a plane wedge-shaped specimen with an edge crack under uniaxial tension
by: V. S. Kravets
Published: (2017)

Determination of contact stresses between mode I crack faces
by: A. O. Kaminskyi, et al.
Published: (2016)

Mode I crack initiation in orthotropic viscoelastic plate under biaxial loading
by: O. S. Bogdanova
Published: (2013)

Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
by: Гасанов, Шахин
Published: (2015)

Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
by: Гасанов, Шахин
Published: (2015)

Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
by: Sh. G. Gasanov
Published: (2015)

On the Slow Growth of Crack with Contacting Faces in a Viscoelastic Body
by: M. F. Selivanov
Published: (2017)

Effect of locking the bend of waveguide nearby critical frequencies of the second mode
by: V. L. Pazynin
Published: (2017)

Modeling of Crack Resistance of Ion-Strengthened Silicate Glass under Bending Deformations
by: P. P. Hontarovskyi, et al.
Published: (2022)

Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
by: Rozumek, D., et al.
Published: (2011)

Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
by: D. Rozumek, et al.
Published: (2011)