Buchumschlag

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	S. V. Sokhan, A. L. Maistrenko, V. H. Sorochenko, V. V. Voznyi, O. I. Borymskyi, M. P. Hamaniuk, Ye. M. Zubanev
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001130423
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

The influence of machining conditions on performance of diamond grinding of silicon carbide ceramic balls
von: S. V. Sokhan, et al.
Veröffentlicht: (2018)

Diamond grinding of ceramic balls with a circular feed
von: S. V. Sokhan, et al.
Veröffentlicht: (2023)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Diamond grinding of ceramic balls with a circular feed
von: S. V. Sokhan, et al.
Veröffentlicht: (2024)

A mechanism of diamond-abrasive finishing of monocrystalline silicon carbide
von: Ju. D. Filatov, et al.
Veröffentlicht: (2013)

Low-temperature synthesis of boron carbide ceramics
von: Ye. V. Solodkyi, et al.
Veröffentlicht: (2018)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

Modeling of the thermal state of a high pressure apparatus cell during the sintering of large-sized carbide boron products
von: V. A. Dutka, et al.
Veröffentlicht: (2019)

Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
von: V. A. Dutka, et al.
Veröffentlicht: (2020)

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
von: V. S. Urbanovich, et al.
Veröffentlicht: (2018)

Finishing spur gears worm diamond elasticity hons
von: A. V. Krivosheja, et al.
Veröffentlicht: (2016)

Synthesis of cubic boron nitride with using of dense modifications of boron nitride polycrystalline grains
von: I. O. Borymskyi
Veröffentlicht: (2017)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)

Deposition of boron carbide coatings by gas-phase method
von: Yu. Zhuravlov, et al.
Veröffentlicht: (2019)

Location of Al and Si atoms in substituted boron carbide
von: V. V. Garbuz, et al.
Veröffentlicht: (2023)

Influence of boron doping on the photosensitivity of cubic silicon carbide
von: Rodionov, V.N., et al.
Veröffentlicht: (2019)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Initiation of a plastic flow in boron carbide at nanoindentation
von: S. N. Dub, et al.
Veröffentlicht: (2015)

Boron, aluminum, nitrogen, oxygen impurities in silicon carbide
von: Vlaskina, S.I., et al.
Veröffentlicht: (2007)

Influence of boron doping on the photosensitivity of cubic silicon carbide
von: V. N. Rodionov, et al.
Veröffentlicht: (2019)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

A study of the influence of the plasticizers on the process of formation of boron carbide
von: V. S. Panov, et al.
Veröffentlicht: (2016)

On melting of B4C boron carbide under pressure
von: V. A. Mukhanov, et al.
Veröffentlicht: (2012)

Improving efficiency of finishing natural stone using diamond–polymer fiber tools
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
von: Ya. Z. Aygьzer, et al.
Veröffentlicht: (2021)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Using PIGE for analysis of boron carbide of received by CVD method
von: Levenets, V., et al.
Veröffentlicht: (2008)

Technologies of man-made placers development during and after finishing of wastes storages exploitation
von: O. A. Medvedeva
Veröffentlicht: (2015)

Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
von: I. V. Plyushchay, et al.
Veröffentlicht: (2020)

Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
von: I. V. Pliushchai, et al.
Veröffentlicht: (2020)

Gas-phase deposition of cavitation-resistant coatings based on boron carbide
von: Yu. Zhuravlov, et al.
Veröffentlicht: (2018)

Improvement of electric and technological modes of metal finishing in a ladle furnace
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

On the interaction of the detonation-synthesized ultradisperse diamond and turbostratic boron nitride
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)

Electric field ionization of boron acceptors in single-crystalline diamond
von: I. V. Altukhov, et al.
Veröffentlicht: (2021)

Features of the structure and properties of metal layers deposited with pre-application of titanium and boron carbides
von: V. V. Peremitko, et al.
Veröffentlicht: (2022)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)