Buchumschlag

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	J. Zhang, B. Chen, W. Yue, H. Chen
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001132109
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Phase composition, microstructure and wear properties of Ni/Ni3Si composites prepared by mechanical alloying
von: Junxi Zhang, et al.
Veröffentlicht: (2021)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tulay Yildiz, et al.
Veröffentlicht: (2018)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Y. Tьlay, et al.
Veröffentlicht: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tülay Yıldız, et al.
Veröffentlicht: (2019)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)

Temperature effects in hot pressing composite diamond - (Fe–Cu–Ni–Sn) on the structure, mechanical and operational
von: V. A. Mechnik, et al.
Veröffentlicht: (2017)

Structure and compositional properties diamond materials (Fe-Cu-Ni-Sn) obtained by hot pressing
von: E. S. Hevorkian, et al.
Veröffentlicht: (2015)

Microstructure and abrasive wear resistance of the deposited Ni–Cr–B–Si material with dispersive phases inclusions
von: S. O. Luzan, et al.
Veröffentlicht: (2020)

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)

Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
von: Sheng, L.Y.
Veröffentlicht: (2016)

Microstructure Investigation of the Spark Plasma Sintered Cu—Al—Ni Shape Memory Material
von: Monastyrsky, G.E., et al.
Veröffentlicht: (2014)

Microstructure Investigation of the Spark Plasma Sintered Cu—Al—Ni Shape Memory Material
von: G. E. Monastyrsky, et al.
Veröffentlicht: (2014)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
von: V. A. Mechnik, et al.
Veröffentlicht: (2018)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
von: M. I. Pashechko
Veröffentlicht: (2010)

Formation of Fe-Cu-Ni-Sn-VN nanocrystalline matrix by vacuum hot pressing for diamond-containing composite. mechanical and tribological properties
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Effect of Y addition on the microstructures and mechanical properties of Mg-Gd-Y-Sm-Zr alloys
von: Fu sanling, et al.
Veröffentlicht: (2017)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021)

Influence of VN additive on the structure and strength characteristics of diamond-containing composites based on the Fe-Cu–Ni–Sn matrix formed by the method of cold pressing followed by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
von: A. M. Stepanchuk, et al.
Veröffentlicht: (2018)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
von: J. Xu, et al.
Veröffentlicht: (2022)

The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
von: O. S. Serhiienko, et al.
Veröffentlicht: (2011)

Evaluation of wear resistance of Fe–Mn–C–B eutectic coatings, alloyed with Si, Ni i Cr, using multicriterion analysis
von: M. I. Pashechko, et al.
Veröffentlicht: (2011)

Effect of temperature on sintering of PCBN with Ti–Si3N4–AIN–Y2O3 additives
von: Mo Peicheng, et al.
Veröffentlicht: (2021)

Creep-induced structural changes in Ni-Si-B amorphous alloy
von: Jurikova, A., et al.
Veröffentlicht: (2008)

Study of aeroabrasive wear of hot-pressed materials of the B4C–TiB2 system
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2014)

Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Mathematic modeling of diffusion processes of the formation of rim-core structure at sintering TiC–Ni alloys with alloying carbide additions
von: N. V. Lytoshenko
Veröffentlicht: (2016)

Phase and structural evolution during mechanical alloying, subsequent annealing and pressure sintering of AlCuNiFeCr high entropy alloy
von: O. I. Yurkova, et al.
Veröffentlicht: (2015)

Structure and wear regularities of coatings from composite metal-ceramic materials of the SiC–Al2O3–Ni–Al system
von: A. P. Umanskij, et al.
Veröffentlicht: (2012)

Properties of Mo–Ni–B phases and alloys in the Ni–MoNi–Mo2NiB2–Ni2B region
von: V. Z. Kublii, et al.
Veröffentlicht: (2020)

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: Ünlü, B.S., et al.
Veröffentlicht: (2015)

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: B. S. Ьnlь, et al.
Veröffentlicht: (2015)