Buchumschlag

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	L. V. Petrushynets, Yu. V. Falchenko, O. O. Novomlynets, Ye. Fedorchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001351241
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Possibilities of manufacturing three-layer welded honeycomb panels from aluminium alloys
von: L. V. Petrushinets, et al.
Veröffentlicht: (2018)

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding
von: I. A. Gusarova, et al.
Veröffentlicht: (2016)

Modern methods of manufacturing three-layer panels from aluminium alloys (Review)
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2018)

Peculiarities of producing layered metal composite materials on aluminuim base
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2020)

Distribution of chemical elements in the zone of joining of aluminium alloy AMg6 with titanium alloy VT6 produced using diffusion welding in vacuum
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2013)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Peculiarities of alloying of welded joint metal of highstrength aluminium alloy with scandium
von: V. E. Fedorchuk, et al.
Veröffentlicht: (2014)

Non-destructive testing of elements of titanium honeycomb panels by shearography method using vacuum load
von: L. M. Lobanov, et al.
Veröffentlicht: (2021)

Friction stir welding of composite, granulated and quasicrystalline aluminium alloys
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2011)

Deformation-free welding of stringer panels from titanium alloy VT20
von: B. E. Paton, et al.
Veröffentlicht: (2014)

Investigation of heat treatment effect on the strength of Al–Ti bimetal honeycomb core
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2021)

Mechanical properties and structural features of butt joints produced at FSW of aluminium alloys of different alloying systems
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2023)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: K. A. Avramov, et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Microstructure of VT20 titanium alloys produced by method of layer-by-layer electron beam fusion using domestic powder materials
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2019)

Quasi-crystalline alloys-fillers for composite layers produced by method of furnace surfacing
von: E. V. Sukhovaja
Veröffentlicht: (2014)

Strength and structure of aluminium alloy welded joints produced by friction stir welding and non-consumable electrode welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2009)

Electron beam welding of thin-sheet three- dimensional structures of aluminium alloys
von: A. A. Bondarev, et al.
Veröffentlicht: (2011)

Modern technological methods of pressure welding of magnesium alloys (Review)
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2022)

Resistance welding of titanium aluminides using nanolayer aluminium-titanium foils
von: V. S. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2009)

The influence of electrolyte composition for hard anodizing of aluminium on oxide layer characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021)

Effect of structure on properties of aluminium-lithium alloy welded joints produced by argonarc and friction stir welding methods
von: L. I. Markashova, et al.
Veröffentlicht: (2016)

Producing of long semi-products of sintered titanium alloys by using friction welding
von: A. E. Kapustjan
Veröffentlicht: (2015)

Brazing of titanium alloys using brazing alloys based on aluminium
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Peculiarities of producing Al-Ti bimetal sheet joints by the method of vacuum diffusion welding
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2020)

Welded Structures from Aluminium Alloys
von: T. M. Labur
Veröffentlicht: (2020)

The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
von: V. V. Girzhon, et al.
Veröffentlicht: (2009)

Evaporation of thin layers on top of solar panels by means of lazer
von: V. P. Harashchuk, et al.
Veröffentlicht: (2012)

Free vibrations of layered cylindrical panels at dynamic nonlinear deformation
von: T. V. Horiachko, et al.
Veröffentlicht: (2014)

Formation of Aluminium Surface Layers’ Structure during Laser Alloying with Copper and Cobalt Powders
von: Girzhon, V.V., et al.
Veröffentlicht: (2013)

Formation of diffusion zone in welded joints of porous aluminium alloy with monolithic magnesium alloy at chemical activation by gallium
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2017)

Microstructure of titanium alloys produced by the method of layered electron beam surfacing using the wire of grade Ti6AI4V
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2020)

Laser welding of titanium alloys
von: B. E. Paton, et al.
Veröffentlicht: (2009)

Calculation of equilibrium diagrams of state and phase transformations of titanium alloys of titanium–aluminium system
von: G. M. Grigorenko, et al.
Veröffentlicht: (2018)

Investigation of the microstructure of aluminum and magnesium joints during diffusion welding
von: L. V. Petrushynets, et al.
Veröffentlicht: (2024)