Cover Image

Current-conducting mould in electroslag technologies

Saved in:

Bibliographic Details
Date:	2022
Main Authors:	Yu. M. Kuskov, V. M. Proskudin, V. A. Zhdanov, L. L. Okopnyk
Format:	Article
Language:	English
Published:	2022
Series:	Automatic Welding
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001351245
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Technologies of manufacturing lining elements by the method of electroslag hardfacing in a current-conducting mould
by: A. V. Netiaha, et al.
Published: (2022)

Electroslag surfacing of end faces with large-section electrode in current-conducting mould
by: Ju. M. Kuskov, et al.
Published: (2017)

Application of non-conducting consumable billets at electroslag surfacing in current-supplying mould
by: Ju. M. Kuskov, et al.
Published: (2018)

Formation of a layer of high-chromium cast iron in current-conducting mould of a square cross-section at electroslag surfacing
by: A. V. Netiaha, et al.
Published: (2021)

Electroslag surfacing of layers of different thicknesses in stationary current-supplying mould
by: Ju. M. Kuskov, et al.
Published: (2018)

Influence of electrical current terminals on electromagnetic processes in a mould for electroslag surfacing of metal
by: Yu. M. Horyslavets, et al.
Published: (2022)

Formation of metal pool in current-supplying mould at electroslag process
by: Ju. M. Kuskov, et al.
Published: (2019)

Electroslag surfacing with large section electrode at direct current in a current-supplying mould
by: Ju. M. Kuskov, et al.
Published: (2018)

Experimental study of slag and metal pool rotation in the electroslag process in current-supplying mould
by: Ju. M. Kuskov, et al.
Published: (2018)

Control of the process of base metal penetration at end face electroslag surfacing in current-supplying mould
by: V. G. Solovev, et al.
Published: (2018)

Selection of wear-resistant materials for electroslag surfacing of mining equipment parts in a current-conducting mould
by: Yu. M. Lankin, et al.
Published: (2022)

Application of chips in electroslag surfacing of dies in current-conducting mold
by: Ju. M. Kuskov, et al.
Published: (2019)

Optimization of the metal pool shape during electroslag melting in a stationary current-carrying mould for manufacturing of bimetallic products
by: V. G. Solovyov, et al.
Published: (2024)

Recycling of used noncompact tools from high-speed steel by electroslag remelting
by: Yu. M. Kuskov, et al.
Published: (2022)

Criteria of selection of designs of cast moulds for centrifugal electroslag casting
by: S. V. Skripnik, et al.
Published: (2011)

Modernization of ESR furnaces into installations for ESS of mill rolls in a current-carrying mould
by: Yu. M. Kuskov, et al.
Published: (2021)

Influence of electric parameters of surfacing with discrete filler in current-supplying mould on velocity of slag pool rotation
by: Ju. M. Kuskov
Published: (2018)

Modeling of electromagnetic processes in a sectional crystalizer for electroslag surfacing of metal
by: Yu. M. Horyslavets, et al.
Published: (2022)

Influence of process and electrical parameters of ESS in current-supplying mould on electrode melting rate and penetration of base metal
by: V. G. Solovev, et al.
Published: (2018)

Electroslag melting in an open mould of ingots from sheet scrap wastes of titanium VT1-0
by: D. I. Bilonyk, et al.
Published: (2022)

Effect of tellurium on microstructure of low-alloyed cast iron deposited by electroslag method in current-carrying mold
by: Ju. M. Kuskov, et al.
Published: (2019)

Structure and properties of ingots produced from sheet cuttings of VT-1 titanium by electroslag remelting in an open mould
by: D. I. Bilonyk, et al.
Published: (2023)

Electric conductivity of slag pool in electroslag welding with wire electrode
by: Ju. N. Lankin, et al.
Published: (2009)

Physique-technological aspects of solidification castings in the sandy mould
by: V. A. Mamishev, et al.
Published: (2014)

Electroslag technologies of producing large forge ingots
by: L. B. Medovar, et al.
Published: (2010)

Physical–chemical properties of fluxes for electroslag technologies
by: R. V. Kozin, et al.
Published: (2016)

Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
by: V. G. Kozhemjakin, et al.
Published: (2015)

lnluence of lux composition on the process of electroslag surfacing of end faces with discrete feeding of fller material
by: Ju. M. Kuskov
Published: (2018)

Electroslag surfacing using discrete material of different methods of manufacture
by: Ju. M. Kuskov, et al.
Published: (2015)

Electroslag technologies for repair of through-thickness cracks
by: S. M. Kozulin, et al.
Published: (2021)

The problem aspects of improving technology of making castings in the moulds from quartz sand
by: V. A. Mamishev, et al.
Published: (2016)

Automation of technological process of lumpy charge remelting in sectional mould
by: E. V. Shapovalov
Published: (2012)

ESR in uncooled mould
by: F. K. Biktagirov, et al.
Published: (2019)

Electroslag surfacing of billet end faces with application of consumable and nonconsumable electrodes
by: Ju. M. Kuskov, et al.
Published: (2018)

Studies of coatings produced by high-velocity oxyfuel spraying using cermet powder based on FeMoNiCrB amorphizing alloy
by: A. V. Netiaha, et al.
Published: (2022)

Electroslag technologies of ingot melting. Liquid metal or consumable electrode
by: K. A. Tsykulenko
Published: (2013)

Fluidized bed application of in technological process of casting production in vacuumized moulds
by: I. A. Shalevskaja, et al.
Published: (2015)

Electroslag surfacing of parts, made of high-chromium cast iron, using cast iron shots
by: Ju. M. Kuskov, et al.
Published: (2013)

Composite inserts for die casting moulds
by: V. V. Jasjukov, et al.
Published: (2015)

Assessment of economic effectiveness of electroslag technologies, using consumable electrode and liquid metal
by: H. P. Stovpchenko, et al.
Published: (2022)