Buchumschlag

Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
1. Verfasser:	M. M. Fridman
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Journal of mechanical engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001159856
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)

Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)

Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: M. M. Fridman
Veröffentlicht: (2019)

Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)

Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)

Optimal design of tubularbar structures subjected to corrosion
von: M. M. Fridman
Veröffentlicht: (2016)

Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, M.M.
Veröffentlicht: (2018)

Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: M. M. Fridman
Veröffentlicht: (2018)

Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)

Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)

Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)

Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)

Hydraulic testing of pipe sections with corrosion damage in the mode of low-cycle loading
von: P. S. Jukhimets, et al.
Veröffentlicht: (2013)

Monitoring corrosion damage of elements and components of aircraft structures by the method of electron shearography
von: L. M. Lobanov, et al.
Veröffentlicht: (2015)

Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: M. M. Fridman
Veröffentlicht: (2017)

Acoustic-emission diagnostics of corrosion damages of materials (A review). P. 1. Detection of electrochemical corrosion and corrosion fatigue
von: V. R. Skalskyi, et al.
Veröffentlicht: (2017)

Mathematical modeling of damage accumulation under conditions of creep and corrosion cracking of structural materials
von: Zhigang Liu, et al.
Veröffentlicht: (2020)

Corrosion damages of pipelines at NNP and problems of their control
von: L. S. Ozhigov, et al.
Veröffentlicht: (2017)

Acoustic-emission diagnostics of corrosion damages of materials (A review). P. 2. Corrosion cracking of metals. Applied aspects of the method application
von: V. R. Skalskyi, et al.
Veröffentlicht: (2017)

Determination of corrosion rate in places of insulation damage of underground pipelines
von: R. M. Dzhala, et al.
Veröffentlicht: (2020)

Geometry-dependent residual life of a pipeline with corrosion damage
von: P. S. Jukhimets
Veröffentlicht: (2010)

Segmentation of corrosion damage images with unknown background by energy minimization
von: T. S. Mandziy, et al.
Veröffentlicht: (2018)

Non-destructive control of the surfaces state damaged by corrosive pits
von: B. P. Rusyn, et al.
Veröffentlicht: (2013)

Fretting-corrosion damage of steel units of a plane wing flap
von: V. O. Kralia, et al.
Veröffentlicht: (2010)

Optimization of heat treatment modes of structural elements of functionally gradient materials
von: M. H. Stashchuk, et al.
Veröffentlicht: (2020)

Signs of corrosion-fatigue service damages of stainless steel of heat exchanger plates
von: O. I. Zvirko, et al.
Veröffentlicht: (2021)

Computer modeling of deformation of the elements of operating power equipment elements with damages
von: B. D. Drobenko
Veröffentlicht: (2010)

Automated assessing of damages of the main gas pipeline surface by corrosion pittings
von: I. V. Konovalenko, et al.
Veröffentlicht: (2013)

Elastic Buckling and Optimization of Asymmetric I-Cross Sections of Cold-Formed Thin-Walled Beams
von: K. Magnucki, et al.
Veröffentlicht: (2006)

Elastic buckling and optimization of asymmetric i-cross sections of cold-formed thin-walled beams
von: Magnucki, K., et al.
Veröffentlicht: (2006)

Prediction of stress corrosion cracking of structures subjected to high-temperature creep
von: O. K. Morachkovskij, et al.
Veröffentlicht: (2010)

Optimal Control by Vibrations of the Beam with Variable Cross-Section
von: M. M. Kopets
Veröffentlicht: (2015)

Accumulation of damages in materials during fracture
von: S. A. Nedoseka, et al.
Veröffentlicht: (2017)

Experimental study of plasma-surface interaction and material damage relevant to ITER type i ELMs
von: Makhlaj, V. A., et al.
Veröffentlicht: (2006)

An Integrated Approach to the Optimization of Plates in Plane Stress State Operated at High Temperatures
von: M. M. Fridman
Veröffentlicht: (2021)

Study of the Effect of Water Intake by the Matrix on the Optimization of the Fiber Matrix Interface Damage for a Composite Material by Genetic Algorithms
von: Temimi Lahouari, H., et al.
Veröffentlicht: (2013)

Damage-Accounted Assessment of the Stress-Strain State of Structural Elements
von: Бобырь, Н.И., et al.
Veröffentlicht: (2017)

Calculation of the damage area in anticorrosion coating of the pipeline section according to the data of electric measurements
von: V. V. Lukovich, et al.
Veröffentlicht: (2012)

Calculation of the damage area in anticorrosion coating of the pipeline section according to the data of electric measurements
von: Lukovich, V. V., et al.
Veröffentlicht: (2012)

Magnetoacoustic diagnostics of hydrogen damage of ferromagnetic materials
von: Z. T. Nazarchuk, et al.
Veröffentlicht: (2018)