Cover Image

Formation of the zone of joining the layers in a composite ingot, surfaced by the electroslag process with liquid metal, for power turbine rotors

Saved in:

Bibliographic Details
Date:	2022
Main Authors:	H. O. Polishko, H. P. Stovpchenko, V. A. Kostin, Yu. Tunik, L. O. Lisova, L. B. Medovar
Format:	Article
Language:	English
Published:	2022
Series:	Electrometallurgy Today
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001351831
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Assessment of economic effectiveness of electroslag technologies, using consumable electrode and liquid metal
by: H. P. Stovpchenko, et al.
Published: (2022)

Electroslag technologies of producing large forge ingots
by: L. B. Medovar, et al.
Published: (2010)

Mass transfer in electroslag processes with consumable electrode and liquid metal
by: G. P. Stovpchenko, et al.
Published: (2020)

Electroslag technologies of ingot melting. Liquid metal or consumable electrode
by: K. A. Tsykulenko
Published: (2013)

Development of electroslag remelting slag, tended to autodecomposition
by: H. P. Stovpchenko, et al.
Published: (2016)

Evaluation of distribution of nonmetallic inclusions in cast metal of 316 type steel after circumferential electroslag surfacing with liquid metal
by: A. A. Polishko, et al.
Published: (2012)

Joining thick metal by multipass electroslag welding
by: K. A. Jushchenko, et al.
Published: (2014)

Investigation of specific electric resistance of steel-copper zone of bimetal electroslag ingot-billet of D.C. ASF
by: V. A. Zajtsev, et al.
Published: (2014)

Formation of structure and properties of 316 type steel at successive circumferential electroslag cladding using liquid metal
by: A. A. Polishko, et al.
Published: (2012)

Peculiarities of physical-chemical interactions in metal-slag-gas system in electroslag remelting
by: A. P. Stovpchenko, et al.
Published: (2012)

Electroslag melting of titanium ingots at pulsed electric supply
by: I. V. Protokovilov, et al.
Published: (2014)

Conception of microplants for producing premium quality products by using electroslag remelting
by: L. B. Medovar, et al.
Published: (2017)

Modeling of structural and stress-strain state of dissimilar steel ingot in electroslag melting
by: V. I. Makhnenko, et al.
Published: (2014)

ESR and modern approaches to control of solidification of large forge ingot
by: L. B. Medovar, et al.
Published: (2013)

Electrochemical processes in electroslag melting (Review)
by: H. P. Stovpchenko, et al.
Published: (2021)

Enlargement of ingots by successive circumferential surfacing
by: A. A. Polishko
Published: (2012)

Physical modeling of ingot crystallization in the mold under the conditions of electroslag heating and topping
by: I. V. Protokovilov, et al.
Published: (2019)

Thermodynamics of interactions and physical properties of slags of 30CaF2/30CaO/30Al2O3 (SiO2, MgO) system at electroslag remelting
by: L. O. Lisova, et al.
Published: (2020)

Modeling of specifics of electroslag remelting in six-electrode bifilar furnace
by: E. A. Volchenkov, et al.
Published: (2016)

Behavior of non-metallic inclusions in structure of cast electroslag stainless steel of AISI of 316 type
by: A. A. Polishko, et al.
Published: (2014)

Effect of deofrmation of molten metal drops on their movement and heating in a slag layer at ESR
by: I. V. Krivtsun, et al.
Published: (2021)

Calculation of thermal fields in process of joining of aluminum plates through intermediate layers at local heating of joint zone
by: M. V. Kulinich, et al.
Published: (2019)

Selection of fluxes for ASR in producing titanium ingots
by: L. B. Medovar, et al.
Published: (2010)

Structure and properties of ingots produced from sheet cuttings of VT-1 titanium by electroslag remelting in an open mould
by: D. I. Bilonyk, et al.
Published: (2023)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
by: M. H. Shulzhenko, et al.
Published: (2011)

Electroslag melting in an open mould of ingots from sheet scrap wastes of titanium VT1-0
by: D. I. Bilonyk, et al.
Published: (2022)

About feasibility of refining crystalline structure of hollow ingots of titanium alloys in magnetically-controlled electroslag melting
by: I. V. Protokovilov
Published: (2011)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
by: Лебедев, Владимир, et al.
Published: (2014)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
by: Лебедев, Владимир, et al.
Published: (2014)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
by: V. G. Lebedev, et al.
Published: (2013)

About new method of ESR of large-size hollow ingots
by: B. B. Fedorovskij, et al.
Published: (2011)

Experience and prospects of traditional ESR for production of long hollow ingots-pipes
by: L. B. Medovar, et al.
Published: (2014)

Modern sensors of liquid metal level for ESR in a short collar mould
by: V. L. Petrenko, et al.
Published: (2020)

Simulation model of electroslag crucible melting on liquid start
by: O. S. Ivanova, et al.
Published: (2016)

Strain state continuous ingot liquid core in the curved continuous casting machine
by: V. M. Poleshchuk, et al.
Published: (2015)

Application of friction stir method for joining of magnesium alloys and their structure modifying
by: G. M. Grigorenko, et al.
Published: (2016)

Electroslag remelting of consumable electrodes of variable section
by: L. B. Medovar, et al.
Published: (2020)

Deformations of welded joints at multi-layer electroslag welding
by: S. M. Kozulin, et al.
Published: (2011)

Use of magnetic pulse welding for joining plates from similar and dissimilar alloys
by: M. A. Polieshchuk, et al.
Published: (2020)

Effect of Blade Material of Steam Turbine Rotor on Aeroelastic Characteristics
by: Биков, Ю. А., et al.
Published: (2025)