Buchumschlag

Use of simulation for homogenization of temperature field in Al2O3 workpiece in the process of hot vacuum pressing

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	V. A. Dutka, E. S. Hevorkian, S. R. Vovk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001195660
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Phase formation in the SiC-Al₂O₃-ZrO₂ system during hot pressing by the method of electroconsolidation
von: Vovk, R.V., et al.
Veröffentlicht: (2019)

Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Thermal conductivity of hot-pressed AlB12–AlN ceramic composite
von: T. O. Prikhna, et al.
Veröffentlicht: (2024)

Structure and properties of tool material from exothermic mixture of Cr2O3–AlN micropowders during hot pressing
von: M. M. Prokopiv, et al.
Veröffentlicht: (2020)

Influence of VN additive on the structure and strength characteristics of diamond-containing composites based on the Fe-Cu–Ni–Sn matrix formed by the method of cold pressing followed by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Expansion of cylindrical tubular workpieces on high-voltage magnetic-pulse installation with controlled vacuum discharger
von: Ljutenko, L. A., et al.
Veröffentlicht: (2021)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Structure and properties of hot-pressed materials based on AlB12C2
von: T. A. Prikhna, et al.
Veröffentlicht: (2017)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tulay Yildiz, et al.
Veröffentlicht: (2018)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Y. Tьlay, et al.
Veröffentlicht: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tülay Yıldız, et al.
Veröffentlicht: (2019)

Computer simulation of the temperature field in sintering carbide composites when induction and beam heatings are used
von: V. A. Dutka
Veröffentlicht: (2013)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

Structure and compositional properties diamond materials (Fe-Cu-Ni-Sn) obtained by hot pressing
von: E. S. Hevorkian, et al.
Veröffentlicht: (2015)

The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)

Formation of Al2O3–Co nanocomposites by vacuum electron beam evaporation
von: Ja. A. Stelmakh, et al.
Veröffentlicht: (2014)

Temperature effects in hot pressing composite diamond - (Fe–Cu–Ni–Sn) on the structure, mechanical and operational
von: V. A. Mechnik, et al.
Veröffentlicht: (2017)

Formation of Fe-Cu-Ni-Sn-VN nanocrystalline matrix by vacuum hot pressing for diamond-containing composite. mechanical and tribological properties
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)

Non-stationary temperature fields in piece-wise homogeneous bands taking into account the frictional heat generation
von: Ya. Soliar, et al.
Veröffentlicht: (2019)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

On the question of determining the level of workpiece in rolls during profiling
von: M. E. Doktorov, et al.
Veröffentlicht: (2015)

The mechanical properties of powder material Ti46Nb4Ta4Al46 obtained by pulsed hot pressing
von: Yu. M. Podrezov, et al.
Veröffentlicht: (2014)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
von: J. Zhang, et al.
Veröffentlicht: (2020)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: H. P. An, et al.
Veröffentlicht: (2014)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: An, H.P., et al.
Veröffentlicht: (2014)

Modeling of temperature fields and stresses in polyethylene pipes in welding with a hot tool
von: N. P. Nesterenko, et al.
Veröffentlicht: (2009)

Mechanical properties of nanostructured cermets on Al2O3 base, produced by electron beam deposition in vacuum
von: Ja. A. Stelmakh
Veröffentlicht: (2012)

Composite nanomaterial of Al2O3—Ag system produced using electron beam evaporation in vacuum
von: Ja. A. Stelmakh, et al.
Veröffentlicht: (2013)

Particularities of the negative streamer propagation in homogeneous and inhomogeneous electric fields. Computer simulation
von: Manuilenko, O.V., et al.
Veröffentlicht: (2013)

Corrosion resistence of the hot-pressed B4C–VC ceramic system
von: O. N. Kajdash, et al.
Veröffentlicht: (2018)

Research of the influence of siliconizing on the structure and properties of hot-pressed polycrystalline silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2018)

The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
von: O. S. Serhiienko, et al.
Veröffentlicht: (2011)

Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2017)

The influence of the working layer thickness on the properties of hot-pressed powder layered composites
von: H. A. Bahliuk, et al.
Veröffentlicht: (2011)

Ti-NbN-Al2O3 and Nb-NbN-Al2O3 multilayer vacuum-arc coatings on tools of cubic boron nitride-polycrystalline superhard materials
von: S. A. Klimenko, et al.
Veröffentlicht: (2007)

Computational studies of electromagnetic field propagation and deforming of structural elements for a thin-walled curved workpiece and an inductor
von: Lavinsky, D. V., et al.
Veröffentlicht: (2024)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)