Buchumschlag

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
1. Verfasser:	V. I. Lavrinenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001195662
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

The process of abrasive machining as a friction interaction between dissimilar materials
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2018)

To the analysis of the estimation of energy costs during diamond-abrasive processing by wheels from superhard materials
von: V. I. Lavrinenko
Veröffentlicht: (2022)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

On the influence of the hydrogen index of technology liquids for performance characteristics diamond abrasive wheels
von: V. I. Lavrinenko
Veröffentlicht: (2024)

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review
von: V. I. Lavrinenko
Veröffentlicht: (2018)

SDiamond machining ceramics: influence of abrasive particle aspect of sludge
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
von: V. I. Lavrinenko
Veröffentlicht: (2016)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Fulfillment of rough surface profile obtained by diamond-abrasive treatment, as one of the factors of its bearing capacity
von: V. I. Lavrinenko
Veröffentlicht: (2023)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness
von: O. O. Pasichnyi, et al.
Veröffentlicht: (2019)

Effective methods of processing parts diamond and abrasive honingoval bars
von: A. M. Koshkin, et al.
Veröffentlicht: (2017)

Specifying the process parameters for diamond dressing of grinding wheels
von: Ya. O. Shakhbazov, et al.
Veröffentlicht: (2019)

The wear of diamond crystals under conditions of frictional contact &quot;diamond-abrasive composite – concrete&quot;
von: V. E. Babich, et al.
Veröffentlicht: (2017)

Influence of productivity diamond abrasive treatment on the surface morphology wear diamond crystals
von: A. M. Kuzej, et al.
Veröffentlicht: (2016)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Surface properties and stability of colloidal sludge systems in the processes of extraction of heavy metals
von: K. V. Kalinichenko, et al.
Veröffentlicht: (2014)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
von: P. G. Matjukha, et al.
Veröffentlicht: (2017)

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review)
von: V. I. Lavrinenko
Veröffentlicht: (2022)

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition)
von: V. I. Lavrinenko
Veröffentlicht: (2013)

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
von: A. V. Burdin, et al.
Veröffentlicht: (2013)

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component)
von: V. I. Lavrinenko
Veröffentlicht: (2012)

A mechanism of diamond-abrasive finishing of monocrystalline silicon carbide
von: Ju. D. Filatov, et al.
Veröffentlicht: (2013)

Energy-saving processing of galvanic sludge by the feritization method
von: Yemchura, Bogdan, et al.
Veröffentlicht: (2020)

Energy-saving processing of galvanic sludge by the feritization method
von: B. Yemchura, et al.
Veröffentlicht: (2020)

Investigation efficiency abrasive composites formed active technology environment in the area of cutting
von: E. A. Pashchenko, et al.
Veröffentlicht: (2016)

Improving accuracy of profile hydro-abrasive cutting of plates of hardmetals and superhard materials
von: A. F. Salenko, et al.
Veröffentlicht: (2014)

Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)

Qualified legal assistance as a factor in the availability of justice
von: D. V. Honchar
Veröffentlicht: (2017)

A novel composite abrasive material of unmarketable natural diamond powder
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

Elaboration of Technology for Making High-porous Abrasive Wheels of Monocrystalline Corund of the European Nomenclature Using a Precision Instrument of Superhard Materials for Turbobuilding of Ukraine
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2018)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
von: V. I. Lavrinenko
Veröffentlicht: (2024)

Determining cutting force components in deep grinding of revolution surfaces by oriented el&#039;bor wheel
von: V. I. Kalchenko, et al.
Veröffentlicht: (2012)

Composites based on cBN micron powders structured by carbon binder for the application as functional elements in the working layer of diamond–abrasive tools. Part 1. Composite grits as abrasive elements
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2014)

Availability as an administrative law factor of disabled people to education
von: I. V. Talanchuk
Veröffentlicht: (2014)

Experimental and numerical studies of the work process in pneumatic abrasive installations
von: Baha Vadym, et al.
Veröffentlicht: (2025)

Modeling of cleaning surfaces by the stream of abrasive particles
von: O. G. Jasev
Veröffentlicht: (2019)