Buchumschlag

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	S. I. Semykin, T. S. Holub, V. V. Vakulchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2020
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001243653
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Comparative study on a physical model of specific features of top blowing through the tip with folded nozzles when blowing single-phase liquids
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Research of the influence of low potential on bihavior splashing of liquid when its top blowing by physical simulation
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Splashes of liquid phases at the top of the oxygen blowing
von: V. B. Okhotskij
Veröffentlicht: (2013)

Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Investigation of the effect of slag on mixing of a bucket bath at bottom blowing by a method of physical modeling
von: V. P. Piptiuk, et al.
Veröffentlicht: (2018)

Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2018)

Studying the Possibility of Using Coherent Type Nozzles for Bof Blowing at the Gas Dynamic Simulation Stand
von: T. S. Golub, et al.
Veröffentlicht: (2023)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Study by physical simulation of gas jet temperature fields distribution at the nozzle exit
von: S. A. Dudchenko, et al.
Veröffentlicht: (2012)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: Semykin, S.I., et al.
Veröffentlicht: (2020)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Analytical study of the characteristics of streams flowing from nozzles of compound-type construction
von: S. I. Semykin, et al.
Veröffentlicht: (2022)

Behavior pattern of temperature condition of converter bath
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2011)

Computer Simulation of Fluid Flow Through a Venturi Nozzle of Different Configurations
von: Yu. Avdieieva, et al.
Veröffentlicht: (2022)

Research interfacial interaction in the flow of injected pulverized coal through a nozzle
von: N. V. Kosolap, et al.
Veröffentlicht: (2013)

Modelling of conditions for melt outflow through nozzles and attachments
von: G. O. Srebrjanskij, et al.
Veröffentlicht: (2015)

Behavior of blow-up solutions for quasilinear parabolic equations
von: Ye. O. Yevhenieva
Veröffentlicht: (2020)

Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
von: T. S. Golub, et al.
Veröffentlicht: (2024)

Analysis of the electrical characteristics of the converter when melting steel bath
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Investigatin of Liquid Metal Movement in a Welding Bath
von: S. P. Ihlin, et al.
Veröffentlicht: (2020)

Phase Space of Rolling Solutions of the Tippe Top
von: Glad, S.T., et al.
Veröffentlicht: (2007)

Testing k-value in k-fold cross validation of forecasting models for time series analysis of G-spreads of top-quality RUB bonds
von: E. Latysh, et al.
Veröffentlicht: (2012)

Testing k-value in k-fold Cross Validation of Forecasting Models for Time Series Analysis of G-spreads of Top-quality RUB Bonds
von: Latysh, E., et al.
Veröffentlicht: (2012)

Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
von: A. V. Bojko, et al.
Veröffentlicht: (2015)

Formation of metal drops in slag phase at steel blowing inert gas in the tundish
von: V. G. Efimova
Veröffentlicht: (2014)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2019)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Providing safety and safe keeping of blast furnaces lining of at blow-out and blowing in
von: V. I. Bolshakov, et al.
Veröffentlicht: (2009)