To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending

Saved in:

Bibliographic Details
Date:	2019
Main Author:	V. N. Pelykh
Format:	Article
Language:	English
Published:	2019
Series:	International Applied Mechanics
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000977135
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Area and point approaches in fatigue life evaluation under combined bending and torsion loading
by: Karolczuk, A., et al.
Published: (2008)

Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)

To Solution of the Fatigue Problems under Two-Axial Combined Symmetric and Asymmetric Cyclic Loading
by: A. D. Pogrebnjak
Published: (2016)

Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
by: Rozumek, D., et al.
Published: (2010)

Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
by: D. Rozumek, et al.
Published: (2010)

Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
by: Yang, B., et al.
Published: (2018)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
by: M. Kurek, et al.
Published: (2011)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
by: Kurek, М., et al.
Published: (2011)

Crack growth specific features under static and low-cyclic loading
by: V. A. Skachkov, et al.
Published: (2015)

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
by: T. Lagoda, et al.
Published: (2017)

Vibrations of conjugated shell systems under combined static loads
by: Ya. M. Hryhorenko, et al.
Published: (2020)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
by: M. Kurek, et al.
Published: (2011)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
by: Kurek, M., et al.
Published: (2011)

Theoretical and Experimental Investigation of the Dissipated and Stored Energy Ratio in Iron under Quasi-Static and Cyclic Loading
by: Plekhov, O., et al.
Published: (2008)

Solving the Problem of Elastic Bending of Layered Console by the Normal Linearly Distributed Load on Longitudinal Faces
by: A. V. Gorik, et al.
Published: (2020)

On numerical realization of torsion and bending problems for prismatic bars with arbitrary cross-sections
by: Ju. Fialko, et al.
Published: (2012)

Specificities of Estimating the Effect of Load Asymmetry on Fatigue Strength and Cyclic Durability
by: А. D. Pogrebnyak
Published: (2024)

Evaluation of residual life of 3-D solid with a plane fatigue crack under cyclic loading
by: D. V. Rudavskyi
Published: (2015)

Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
by: Rozumek, D., et al.
Published: (2011)

Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
by: D. Rozumek, et al.
Published: (2011)

Theoretical prediction of fatigue crack growth in load-carrying welded structures at random spectrum of cyclic loading
by: V. I. Makhnenko, et al.
Published: (2009)

Stability of Shells of Revolution of Different Gauss Curvatures in the Field of Combined Statical Loads
by: O. I. Bespalova, et al.
Published: (2021)

Static and fatigue strength of basalt reinforcement
by: M. M. Hvozdiuk, et al.
Published: (2013)

Calculation of fatigue life of cylindrical parts at multilayer surfacing and service cyclic thermomechanical loading
by: I. K. Senchenkov, et al.
Published: (2015)

Cyclic left and torsion-theoretic spectra of modules and their relations
by: Maloid-Glebova, Marta
Published: (2016)

Cyclic left and torsion-theoretic spectra of modules and their relations
by: M. Maloid-Glebova
Published: (2015)

Cyclic left and torsion-theoretic spectra of modules and their relations
by: Maloid-Glebova, M.
Published: (2015)

A specimen for fatigue thresholds determination under cyclic transverse shear
by: O. P. Datsyshyn, et al.
Published: (2019)

Bending of axisymmeric loaded thick plates
by: V. P. Revenko
Published: (2019)

Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
by: Atroshenko, S.A., et al.
Published: (2002)

Some aspects of the heating of metal under cyclic loading
by: Мацевитый, В. М., et al.
Published: (2016)

Some aspects of the heating of metal under cyclic loading
by: Мацевитый, В. М., et al.
Published: (2016)

Some aspects of the heating of metal under cyclic loading
by: V. M. Matsevityj, et al.
Published: (2011)

Bending the Plate on Elastic Foundation with Initial Stresses under Action of Moving Load
by: Ju. Babich, et al.
Published: (2017)

Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
by: Gopkalo, A.P.
Published: (2009)

Influence of irregular cyclic load on fatigue resistance of thinsheet welded joints of heat-strengthened aluminium alloys
by: V. V. Knysh, et al.
Published: (2021)

Solving a Problem of Adaptive Stabilization for Some Static MIMO Systems
by: L. S. Zhiteckii, et al.
Published: (2019)

Solving a Problem of Adaptive Stabilization for Some Static MIMO Systems
by: Zhiteckii, L.S., et al.
Published: (2019)

Features of AE monitoring at high-speed cyclic cantilever bending of samples
by: Ju. G. Bezymjannyj, et al.
Published: (2012)

Golub V. P., Pelykh V. N., Pogrebnyak A. D. To Analysis of Lifetime of Prismatic Rods under an Asymmetric Cyclic Load
by: V. P. Golub, et al.
Published: (2013)