Buchumschlag

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	Y. Tьlay, A. Sьleyman
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001042741
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tulay Yildiz, et al.
Veröffentlicht: (2018)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tülay Yıldız, et al.
Veröffentlicht: (2019)

The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
von: O. S. Serhiienko, et al.
Veröffentlicht: (2011)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
von: J. Zhang, et al.
Veröffentlicht: (2020)

Automation isostatic pressing of solidify cast at the gasify-model fouding
von: V. S. Doroshenko
Veröffentlicht: (2016)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
von: U. Зavdar, et al.
Veröffentlicht: (2014)

Modeling of the compaction of powder filter elements during radial isostatic pressing
von: Yu. Povstianoi, et al.
Veröffentlicht: (2020)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
von: Ya. Z. Aygьzer, et al.
Veröffentlicht: (2021)

Producing of long semi-products of sintered titanium alloys by using friction welding
von: A. E. Kapustjan
Veröffentlicht: (2015)

Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
von: A. P. Zhudra
Veröffentlicht: (2014)

The wear resistance of titanium alloys
von: O. M. Solovar, et al.
Veröffentlicht: (2016)

Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites
von: M. Şimşir, et al.
Veröffentlicht: (2013)

Preparation of nanocrystalline Bi2Te3 via microwave-solvothermal synthesis and hot isostatic pressure
von: O. N. Maradudina, et al.
Veröffentlicht: (2012)

Electric conductivity of resist heathing details produced by pressing
von: O. V. Savytskyi, et al.
Veröffentlicht: (2018)

Study of aeroabrasive wear of hot-pressed materials of the B4C–TiB2 system
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2014)

Influence of Titanium on Formation of Wear-Resistant Alloy
von: A. Y. Liubych, et al.
Veröffentlicht: (2013)

Corrosion resistence of the hot-pressed B4C–VC ceramic system
von: O. N. Kajdash, et al.
Veröffentlicht: (2018)

Use of simulation for homogenization of temperature field in Al2O3 workpiece in the process of hot vacuum pressing
von: V. A. Dutka, et al.
Veröffentlicht: (2020)

Investigation of the processes of wear-resistant surface alloying
von: A. G. Kovalchuk, et al.
Veröffentlicht: (2017)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

Microstructure properties of particles reinforced polytetrafluoroethylene composite bearings after wear
von: B. S. Ьnlь, et al.
Veröffentlicht: (2015)

Gas-abrasive wear resis-tance at elevated temperatures of coatings produced using arc metallization
von: V. I. Pokhmurskij, et al.
Veröffentlicht: (2013)

Manufacture of hot-pressed and cold-deformed pipes of VT1-0 titanium alloy cast hollow billet, produced by electron beam melting method
von: O. E. Sobko-Nesteruk, et al.
Veröffentlicht: (2013)

Temperature effects in hot pressing composite diamond - (Fe–Cu–Ni–Sn) on the structure, mechanical and operational
von: V. A. Mechnik, et al.
Veröffentlicht: (2017)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
von: V. A. Mechnik, et al.
Veröffentlicht: (2018)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Behavior of silicides of Ti—Zr—Si system and their effect on properties of welded joints of heat-resistant titanium alloys, produced by press welding
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

Wear Behaviour of Crankshaft Journals Filled by Submerged Arc Welding
von: A. A. Цztьrk, et al.
Veröffentlicht: (2014)

The influence of oxidation on wear resistance of BH-10 alloy
von: N. B. Ratska, et al.
Veröffentlicht: (2012)

Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Effect of concentration of hard particles on gas-abrasive wear resistance of composite alloys
von: A. P. Voronchuk
Veröffentlicht: (2009)

The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)

Investigation of formation of structure of wear-resistant alloy in surfacing using powder strip PL-AN-111
von: B. V. Efremenko, et al.
Veröffentlicht: (2017)

Physical-chemical processes in castings with wear-resistant surface alloying
von: A. G. Kovalchuk, et al.
Veröffentlicht: (2018)

The influence of oxynitriding on wear-resistance of VT14 titanium alloy
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

Strength of heat-resistant nickel alloy Inconel 718 brazed joints, produced using palladium brazing alloys
von: V. F. Khorunov, et al.
Veröffentlicht: (2010)