Cover Image

Advantages of Casting Partially Crystallized Aluminum Alloys (Reocasting)

Saved in:

Bibliographic Details
Date:	2019
Main Authors:	V. P. Golovachenko, T. G. Tsir, V. M. Duka, A. G. Vernidub, N. P. Isajcheva
Format:	Article
Language:	English
Published:	2019
Series:	Casting processes
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001046419
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Study of Influence Dynamic Gating System on the Structure and Properties of Thick-Walled Castings of Aluminum Alloy AK7ch. Report 1
by: V. P. Golovachenko, et al.
Published: (2016)

Environmentally Friendly Method to Finish Refining Aluminum Alloys
by: V. P. Golovachenko, et al.
Published: (2019)

Effect of α-Phase morphology on physical-mechanical properties casts of aluminum alloy AK7ch
by: G. P. Borisov, et al.
Published: (2016)

Casting with Crystallization under Pressure of Aluminum Alloys
by: K. A. Batyshev, et al.
Published: (2018)

Analysis of the characteristics of the cooling of the metallic system casting – riser from aluminium alloy AK9M1
by: V. P. Golovachenko, et al.
Published: (2018)

Invesfigation of the effect of melt swing in the form on the alloy structure AK7Ch. Report 2
by: V. P. Golovachenko, et al.
Published: (2017)

Effect morphology primary crystals of solid solutions in aluminum mouldings on its thermophysicals capabilities
by: A. A. Shcheretskij, et al.
Published: (2016)

Extraordinary Flooding of Aluminum Alloy Castings
by: F. M. Kotliarskyi
Published: (2020)

Extreme pressure properties of lubricants under die casting aluminum alloys
by: A. M. Mikhaltsov, et al.
Published: (2011)

Direct thermal method of rheocasting for alloys on zn and Cu base
by: A. G. Borisov, et al.
Published: (2017)

Sasting by crystallization under pressure of aluminum alloys
by: K. A. Batyshev, et al.
Published: (2018)

Influence of thermal parameters of the direct thermal method rheocasting on the formation and properties of unprofitable castings of alloy AK7
by: A. G. Borisov, et al.
Published: (2015)

Some advantages of welded joints of aluminum 1201 alloy produced by friction stir welding
by: A. H. Pokliatskyi, et al.
Published: (2021)

The Thixocasting of Aluminum Alloy AK7ch Using Billets with Different Initial Structure of Primary Phase
by: A. N. Neduzhij, et al.
Published: (2019)

Justification of the Choice of the Rational Method of Casting Customs From Deformable Aluminum Alloys
by: O. V. Nohovitsyn, et al.
Published: (2021)

Existing ideasabout gas-bearing defects in castings made of aluminum alloys
by: F. M. Kotljarskij
Published: (2017)

The effect of electromagnetic fields imposition on aluminum and its alloys during solidification
by: M. M. Voron, et al.
Published: (2015)

The possibility of increasing electromagnetic pressure in two-zone magnetodynamic installations for casting of aluminum alloys
by: V. I. Dubodelov, et al.
Published: (2016)

Effect of stress concentration on the fatigue and corrosion-fatigue properties of cast aluminum VAL10 and forced aluminum AK6 alloys
by: Karlashov, A.V., et al.
Published: (1985)

The influence of Temperature and rotary Treatment on hot-shortness of the high-strength aluminium alloy Val 10
by: V. P. Golovachenko, et al.
Published: (2014)

Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes
by: V. P. Holovachenko, et al.
Published: (2020)

Influence of complex impact on the formation of structure and thixotropic properties of cast high-strength aluminium alloys B95 AND D16
by: A. G. Prigunova, et al.
Published: (2018)

Mechanical properties structural sensitivity of Al-Mg-Si ternary system cast aluminum alloys at elevated temperatures
by: P. M. Romanko, et al.
Published: (2014)

Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
by: Uematsu, Y., et al.
Published: (2008)

The investigation of possibility of Refining AK7 Alloy Grans by means of the creation by mixing the melts AK12 and A7
by: V. I. Belik, et al.
Published: (2017)

Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminum alloys
by: S. V. Bondarenko, et al.
Published: (2013)

Application of the technological phase diagrams for optimization of melting and casting regimes of secondary aluminum alloys
by: O. A. Shcheretskyi
Published: (2009)

Influence of Melt Hydrogenation with Other Types of Processing on Formation and Quality of Castings from Aluminum Alloys
by: F. M. Kotljarskij
Published: (2019)

Investigation of Phase Transformations During Crystallization of Aluminum Alloys by Hardening-Microstructural Analysis
by: A. H. Pryhunova, et al.
Published: (2020)

Relation between Mechanical Properties and Microstructure of Cast Aluminum Alloy AlSi9Cu3
by: Panuskova, M., et al.
Published: (2008)

The growth of aluminum casting production at the beginning of the XXI century
by: V. A. Gnatush, et al.
Published: (2019)

Hydrogen refining of aluminum alloys
by: F. M. Kotljarskij
Published: (2018)

Problems of development of industrial usage of technology of double-roll casting and rolled of aluminum and iron-carbon alloys
by: I. R. Baranov
Published: (2018)

Alloying of surface layer of cast billet at casting
by: V. I. Tsotsko, et al.
Published: (2009)

The ternary eutectic in cobalt alloys with aluminum and tungsten
by: H. P. Dmytriieva, et al.
Published: (2009)

Modification of the aluminum alloy by the radiation and mechanical treatment
by: Donets, S.E., et al.
Published: (2020)

Research electric, magnetic and power characteristics at idle mode of mock-updevice of two-zone magnetodynamic installation for casting aluminum alloy
by: V. I. Dubodelov, et al.
Published: (2016)

Influence of changing conditions of cooling in crystallization range on the structure of AK7ch alloy
by: V. M. Duka, et al.
Published: (2011)

Composition formation in dendrites in cast multicomponent high-entropy monophase alloys with BCC crystal lattice
by: S. A. Firstov, et al.
Published: (2012)

Modeling valkovoe casting-rolling of aluminum by finite element method
by: Ju. Prikhodko, et al.
Published: (2014)