Buchumschlag

Microstructure of Co-Cr dental alloys manufactured by casting and 3D selective laser melting

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	M. O. Vasylyev, B. M. Mordyuk, S. M. Voloshko, P. O. Gurin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Progress in Physics of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001374958
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part I. Microstructure
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Influence of selective laser melting process parameters on the microstructure formation
von: M. A. Latypova, et al.
Veröffentlicht: (2023)

Electrochemical corrosion of dental alloys
von: M. A. Vasilev, et al.
Veröffentlicht: (2019)

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part II. Mechanical properties
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Microstructure evolution of the carbon steels during surface severe plastic deformation
von: M. O. Vasylyev, et al.
Veröffentlicht: (2021)

Microstructure of melted zone at multiplied laser pulses action
von: I. E. Gnatjuk, et al.
Veröffentlicht: (2003)

Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021)

Application of SLM-technology for manufacture of dental implants from Ti – 6Al – 4V alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Mössbauer and Ultrasonic Study of the As-Cast High-Entropy AlxCuCrCoNiFe Alloys
von: Nadutov, V.M., et al.
Veröffentlicht: (2017)

Development and smelting of casting high-entropy alloys based on the Fe-Co-Ni-Mn-Cr system
von: O. A. Shcheretskyi, et al.
Veröffentlicht: (2022)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
von: V. M. Nadutov, et al.
Veröffentlicht: (2016)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
von: Nadutov, V.M., et al.
Veröffentlicht: (2016)

Influence of long-term soaking on the structure and properties of in625 alloy samples made by selective laser melting
von: N. O. Lysenko, et al.
Veröffentlicht: (2021)

Calculation of Residual Stresses under Selective Laser Melting of Powders
von: A. V. Gusarov, et al.
Veröffentlicht: (2013)

Study of the Material Quality of Samples Obtained by Selective Laser Melting (SLM) Method from IN718 Alloy Powder
von: V. V. Klochykhin, et al.
Veröffentlicht: (2021)

Optimization of the Microstructure and Mechanical Properties of a Laves Phase-Strengthened Hypoeutectic NiAl/Cr(Mo,W) Alloy by Suction Casting
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2022)

The duration indices of dental manufacturing protocol of bridges relying on implants with screw-monolithic abutments
von: Ye. V. Diiev, et al.
Veröffentlicht: (2016)

Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method
von: S. Adjamskiy, et al.
Veröffentlicht: (2022)

Problems and prospects of studying the processes of selective laser melting of materials for aerospace engineering (Review)
von: M. V. Sokolovskyi
Veröffentlicht: (2022)

Electron-beam installations for melting and casting of zirconium alloys
von: S. V. Ladokhin
Veröffentlicht: (2017)

Microstructure and mechanical properties of metals and alloys deformed in liquid nitrogen: review
von: M. A. Vasilev, et al.
Veröffentlicht: (2012)

Experimental Investigation on Microstructure and Mechanical Properties of Direct Squeeze Cast Al–13%Si Alloy
von: Souissi, S., et al.
Veröffentlicht: (2012)

Effect of Al Content on Magnetic Properties and Thermal Expansion of As-Cast High-Entropy Alloys AlxFeCoNiCuCr
von: V. M. Nadutov, et al.
Veröffentlicht: (2015)

Effect of Al Content on Magnetic Properties and Thermal Expansion of As-Cast High-Entropy Alloys AlxFeCoNiCuCr
von: Nadutov, V.M., et al.
Veröffentlicht: (2015)

Relation between Mechanical Properties and Microstructure of Cast Aluminum Alloy AlSi9Cu3
von: Panuskova, M., et al.
Veröffentlicht: (2008)

Technology of obtaining alloy powder CoCrAlYSi
von: O. P. Vasyleha, et al.
Veröffentlicht: (2011)

Manufacture of hot-pressed and cold-deformed pipes of VT1-0 titanium alloy cast hollow billet, produced by electron beam melting method
von: O. E. Sobko-Nesteruk, et al.
Veröffentlicht: (2013)

The Ukrainian Dental Market: Characteristics of Demand for Services in the Segment of Dental Implantation
von: T. O. Slipchenko
Veröffentlicht: (2017)

Effect of tellurium on microstructure of low-alloyed cast iron deposited by electroslag method in current-carrying mold
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2019)

High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2018)

Temperature Dependence of the Acoustic and Mechanical Properties of Cast and Annealed High-Entropy Al0.5CoCuCrNiFe Alloy
von: Ju. A. Semerenko, et al.
Veröffentlicht: (2015)

Investigation of deep penetration conditions when making samples from high-temperature alloy Inconel 718 by the method of selective laser melting
von: S. V. Adzhamskij, et al.
Veröffentlicht: (2019)

Selection of method of manufacture of electroslag cast bodies of flange high-pressure stop valves in a corrosion-resistant variant
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)

Microstructures and properties of Fe–Co–Cu pre-alloyed powder for geological diamond bits
von: D. Xie, et al.
Veröffentlicht: (2019)

Surface laser treatment of sintered alloy Cu—30% (wt. ) Cr
von: V. P. Korzhov
Veröffentlicht: (2014)

Application of ultrasonic surface treatment technologies in metals and alloys additive manufacturing
von: S. M. Voloshko, et al.
Veröffentlicht: (2024)

Structure and properties of Ti – Al – V cast titanium alloys obtained by electron-beam melting
von: M. M. Voron, et al.
Veröffentlicht: (2015)

Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)

Influence of Melt Hydrogenation with Other Types of Processing on Formation and Quality of Castings from Aluminum Alloys
von: F. M. Kotljarskij
Veröffentlicht: (2019)