Buchumschlag

Shear transformation of austenite in steels considering stresses&#039; effects

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	S. V. Bobyr, E. V. Parusov, G. V. Levchenko, Yu. Borisenko, I. M. Chuiko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Progress in Physics of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001374962
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Analytical models of austenite transformation in steel with allowance for internal stresses
von: S. V. Bobyr
Veröffentlicht: (2018)

Regularities of the retained austenite formation in the complexly alloyed steel (overview)
von: S. V. Bobyr, et al.
Veröffentlicht: (2021)

Influence of a kind treatment on the austenite grain high carbon steel
von: E. V. Parusov, et al.
Veröffentlicht: (2014)

Models and characteristics of discontinuous transformation of austenite in iron–carbon alloys
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

Phase transformations of austenitic stainless modified steels
von: Ye. H. Aftandiliants
Veröffentlicht: (2019)

Comparative analysis of the kinetics of martensitic transformation in low-alloy structural steel by dilatometric and calculation methods
von: I. M. Chuiko, et al.
Veröffentlicht: (2024)

Analysis of phase-structural transformations during cooling of steels, taking into account the deformations and stresses
von: S. V. Bobyr, et al.
Veröffentlicht: (2018)

The stamping steel for hot deformation with controlled austenit transformation
von: K. O. Hohaiev, et al.
Veröffentlicht: (2014)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
von: S. V. Bobyr, et al.
Veröffentlicht: (2020)

About the austenite transformation kinetics in steels under non-equilibrium conditions
von: M. F. Evsjukov, et al.
Veröffentlicht: (2013)

Investigation of stress-strain state of welded structures of austenite steel under the conditions of radiation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2013)

Cast steel with adjustable austenitic transformation during operation, obtained by electroslag remelting
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2020)

Dependence of corrosion behaviour of austenitic chromium-nickel steels on the paramagnetic state of austenite
von: H. V. Snizhnoi
Veröffentlicht: (2013)

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
von: M. F. Evsjukov, et al.
Veröffentlicht: (2014)

Irradiation-assisted intergranular stress corrosion cracking of austenitic stainless steel in steam-water mixture
von: Goncharenko, Yu.D., et al.
Veröffentlicht: (2002)

Development of the theory of pearlite transformation in steel
von: V. V. Parusov, et al.
Veröffentlicht: (2013)

Scientific and technological fundamentals of the production of highly efficient types of construction steel and wire rod
von: E. V. Parusov, et al.
Veröffentlicht: (2019)

Die Steel with Regulated Austenitic Transformation for Hot Deformation of Copper-Nickel Alloy
von: K. O. Gogaev, et al.
Veröffentlicht: (2022)

Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
von: V. Kirots, et al.
Veröffentlicht: (2012)

Increase of heat resistance and properties of die steel with control of austenitic transformation during operation
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2019)

Thermomechanical strengthening of steels with low stability austenite
von: A. S. Opalchuk, et al.
Veröffentlicht: (2016)

ESR of electrodes compacted of austenite stainless steel chips
von: V. A. Shapovalov, et al.
Veröffentlicht: (2011)

Formation of semiconducting nano-structures on the surface of austenite steel
von: S. V. Nesterenko, et al.
Veröffentlicht: (2007)

Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)

Effect of drawing dies with shear on the structure and the properties of low-carbon steel
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2015)

Cooperative effect of displacement damage and inert gas impurities on deuterium retention in austenitic and ferritic-martensitic steels
von: Karpov, S.A., et al.
Veröffentlicht: (2014)

The effect of heating temperature and carbon content on the growth of austenite grains in carbon steels for manufacture of railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)

Study of the influence of cryogene processing on the characteristics of structure formation and fatigue resistance of 38KHN3MFA steel after preliminary thermal hardening
von: S. V. Bobyr, et al.
Veröffentlicht: (2022)

Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)

The structure influencing of stainless steel with metastable austenite on the cavitational resistance
von: I. F. Kirchu, et al.
Veröffentlicht: (2011)

The influence of lead melt on embrittlement of ferritic and austenitic chromium steels
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)

Drawing with shear as an effective method of the control of the structure and the properties for low-carbon steel
von: Pashinskaya, E., et al.
Veröffentlicht: (2015)

Change in the ductility characteristics of austenitic steels during deformation at different rates
von: Shinkarenko, E.T.
Veröffentlicht: (1985)

Exact solutions to some problems of the statics of non-circular cylindrical shells considering transverse shear strains
von: Ye. A. Storozhuk, et al.
Veröffentlicht: (2016)

Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
von: S. V. Bobyr, et al.
Veröffentlicht: (2012)

Plasma-arc remelting of billets compacted from chips of austenitic stainless steels
von: V. R. Burnashev, et al.
Veröffentlicht: (2014)

Method of solid-state welding of austenitic and oxide dispersion strengthened steels
von: B. V. Borts, et al.
Veröffentlicht: (2017)

Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)

Dependence of the kinetics of bainite transformation on the interatomic distances in the supercooled austenite
von: A. I. Babachenko, et al.
Veröffentlicht: (2014)

Quality of ESR ingots, melted of electrodes pressed of chips of austenite stainless steels
von: V. A. Shapovalov, et al.
Veröffentlicht: (2012)