Buchumschlag

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
1. Verfasser:	V. G. Poltoratskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001089257
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
von: V. P. Afanasev, et al.
Veröffentlicht: (2016)

Composites based on cBN micron powders structured by carbon binder for the application as functional elements in the working layer of diamond–abrasive tools. Part 1. Composite grits as abrasive elements
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
von: V. G. Poltoratskij
Veröffentlicht: (2017)

A novel composite abrasive material of unmarketable natural diamond powder
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)

Modified powders of carbon nanotrubs for abrasive tools
von: N. O. Oliinyk, et al.
Veröffentlicht: (2018)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review
von: V. I. Lavrinenko
Veröffentlicht: (2018)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: D. Xie, et al.
Veröffentlicht: (2018)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: Delong Xie, et al.
Veröffentlicht: (2018)

Thermostable power sensors for transmitted continuous radiation of CO- and CO₂- lasers
von: Zagoruiko, Yu.A., et al.
Veröffentlicht: (2000)

Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
von: Романенко, Я.М., et al.
Veröffentlicht: (2015)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
von: H. A. Petasiuk, et al.
Veröffentlicht: (2023)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Effective methods of processing parts diamond and abrasive honingoval bars
von: A. M. Koshkin, et al.
Veröffentlicht: (2017)

Determination of oxides intended for surface modification of diamond grains by their functional characteristics
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2020)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2017)

Influence of porosity of tool composite on efficiency of profile diamond grinding of sapphire and zirconium dioxide
von: Ye. O. Pashchenko, et al.
Veröffentlicht: (2020)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
von: A. S. Osipov, et al.
Veröffentlicht: (2016)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)

Термобаричне спікання композиту cBN–Cr₃C₂
von: Сліпченко, К.В., et al.
Veröffentlicht: (2017)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
von: V. I. Lavrinenko
Veröffentlicht: (2016)

Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: Han, P., et al.
Veröffentlicht: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: Chen, L., et al.
Veröffentlicht: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: P. Han, et al.
Veröffentlicht: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: L. Chen, et al.
Veröffentlicht: (2017)