Cover Image

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools

Saved in:

Bibliographic Details
Date:	2019
Main Author:	V. G. Poltoratskij
Format:	Article
Language:	English
Published:	2019
Series:	Tooling materials science
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001089257
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition
by: V. G. Poltoratskij, et al.
Published: (2019)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
by: V. P. Afanasev, et al.
Published: (2016)

Composites based on cBN micron powders structured by carbon binder for the application as functional elements in the working layer of diamond–abrasive tools. Part 1. Composite grits as abrasive elements
by: V. I. Lavrinenko, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
by: V. I. Lavrinenko, et al.
Published: (2024)

Grinding of gear wheels by diamond-abrasive wheels
by: S. V. Rjabchenko
Published: (2017)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
by: V. G. Poltoratskij, et al.
Published: (2019)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
by: A. A. Adamovskij, et al.
Published: (2015)

Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
by: V. G. Poltoratskij
Published: (2017)

A novel composite abrasive material of unmarketable natural diamond powder
by: V. G. Poltoratskij, et al.
Published: (2014)

Modified powders of carbon nanotrubs for abrasive tools
by: N. O. Oliinyk, et al.
Published: (2018)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
by: V. I. Lavrinenko, et al.
Published: (2013)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
by: V. I. Lavrinenko, et al.
Published: (2024)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
by: V. I. Lavrinenko, et al.
Published: (2016)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
by: V. G. Poltoratskij, et al.
Published: (2016)

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review
by: V. I. Lavrinenko
Published: (2018)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
by: D. Xie, et al.
Published: (2018)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
by: Delong Xie, et al.
Published: (2018)

Thermostable power sensors for transmitted continuous radiation of CO- and CO₂- lasers
by: Zagoruiko, Yu.A., et al.
Published: (2000)

Sintering of cBN based materials with TaC binder for cutting tool application
by: K. V. Slipchenko, et al.
Published: (2020)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
by: Романенко, Я.М., et al.
Published: (2015)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
by: H. A. Petasiuk, et al.
Published: (2023)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

Effective methods of processing parts diamond and abrasive honingoval bars
by: A. M. Koshkin, et al.
Published: (2017)

Determination of oxides intended for surface modification of diamond grains by their functional characteristics
by: V. I. Lavrinenko, et al.
Published: (2020)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
by: G. D. Ilnitskaja, et al.
Published: (2017)

Influence of porosity of tool composite on efficiency of profile diamond grinding of sapphire and zirconium dioxide
by: Ye. O. Pashchenko, et al.
Published: (2020)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
by: S. V. Rjabchenko, et al.
Published: (2018)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
by: Ya. M. Romanenko, et al.
Published: (2017)

Термобаричне спікання композиту cBN–Cr₃C₂
by: Сліпченко, К.В., et al.
Published: (2017)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
by: V. I. Lavrinenko
Published: (2016)

Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance
by: M. N. Shejko, et al.
Published: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: Han, P., et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
by: P. Han, et al.
Published: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)