Buchumschlag

Evaluation of polycrystalline diamond tools in milling of pre-sintered and fully-sintered zirconia ceramics

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	J. Xu, M. Ji, L. Li, M. Chen
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001322022
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Helical milling of small holes in fully-sintered zirconia ceramic with PCD tools
von: J. He, et al.
Veröffentlicht: (2024)

Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
von: J. Xu, et al.
Veröffentlicht: (2022)

Sintering of tetragonal zirconia nanopowders. Sintering mechanisms and the role of mechanical grinding
von: M. V. Lakusta, et al.
Veröffentlicht: (2016)

Features of sintering of silica-doped tetragonal zirconia nanopowders
von: M. V. Lakusta, et al.
Veröffentlicht: (2016)

Production of polycrystalline materials by sintering of nanodispersed diamond nanopowders at high pressure. Review
von: O. O. Bochechka
Veröffentlicht: (2018)

Capacitor and resonator ceramics with low sintering temperature
von: Vovk, E.A., et al.
Veröffentlicht: (2004)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
von: J. Xu, et al.
Veröffentlicht: (2022)

Effect of sintering conditions on physical properties of carbonated hydroxyapatite ceramics
von: Tkachenko, M.V., et al.
Veröffentlicht: (2008)

Phase formation and diamond retention in Cdiamond‒(WC‒Co)‒ZrO2 composites sintered by the spark-plasma sintering method
von: B. T. Ratov, et al.
Veröffentlicht: (2024)

Investigation of the formation during sintering diamond-carbide plates with activation additions
von: V. Z. Turkevych, et al.
Veröffentlicht: (2017)

Numerical modeling of liquid–phase infiltration in the process of sintering ceramic composites
von: V. A. Dutka
Veröffentlicht: (2014)

Study of granular steelmaking wastes as part of sinter burden composition effect on indexes of sintering process and sinter qualit
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)

Formation of the electrophysical properties of the polycrystals during hpht sintering of conductive diamond powders
von: O. O. Bochechka, et al.
Veröffentlicht: (2016)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
von: Çavdar, U., et al.
Veröffentlicht: (2014)

Mechanical properties of ceramics based on the hafnium and titanium diborides sintered by topochemical reactions
von: I. F. Kazo, et al.
Veröffentlicht: (2012)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
von: U. Зavdar, et al.
Veröffentlicht: (2014)

Mechanism of compacting the diamond nanopowder of detonation synthesis at its high pressure sintering
von: O. O. Bochechka
Veröffentlicht: (2017)

Electric-physical characteristics of pressureless sintered AlN–TiN ceramic composite
von: I. P. Fesenko, et al.
Veröffentlicht: (2022)

Influence of modification of the diamond nanoparticles surface by W-C bond on sintering and properties of nanocomposite diamond-tungsten carbide
von: O. O. Bochechka, et al.
Veröffentlicht: (2018)

Electrical resistance of the islet film of gold on the surface of thermobarically sintered cBN-ceramics
von: I. P. Fesenko, et al.
Veröffentlicht: (2021)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)

Icrease of strength of the composites based on diamond during the sintering of them in terms of the high pressure
von: N. O. Rusinova
Veröffentlicht: (2017)

Cone pelletizers sinter charge
von: V. A. Kozachishen, et al.
Veröffentlicht: (2009)

Results of sintering and properties of sinter made from the charge, prepared with the use of surface-active agents
von: A. S. Nesterov, et al.
Veröffentlicht: (2012)

Features of formation of nanodisperse granular structure during RT-sintering of hexagonal diamond (lonsdaleite) powder
von: H. S. Olieinyk, et al.
Veröffentlicht: (2020)

On the role of hydrogen in sintering of titanium powders
von: D. H. Savvakin, et al.
Veröffentlicht: (2011)

Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Effect of functional cover of particles of diamond nanopowders on sintering nanocomposites &quot;diamond - tungsten carbide&quot;
von: T. O. Kuryliak
Veröffentlicht: (2016)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
von: V. S. Urbanovich, et al.
Veröffentlicht: (2018)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: D. Xie, et al.
Veröffentlicht: (2018)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: Delong Xie, et al.
Veröffentlicht: (2018)

Influence of sintering time on the microstructure and electric properties of low-voltage Zinc oxide-based varistor ceramics
von: Yu. Lyashkov
Veröffentlicht: (2014)

Influence of sintering time on the microstructure and electric properties of low-voltage Zinc oxide-based varistor ceramics
von: Ju. Ljashkov
Veröffentlicht: (2014)

Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
von: Shen Xiang-yu, et al.
Veröffentlicht: (2017)

Structural changes of vanadium nitride under the conditions of thermobaric sintering in the cBN-VN-Al ceramic composite
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)

The influence of oxidation on the corrosion resistance of sintered titanium
von: A. A. Skrebtsov, et al.
Veröffentlicht: (2013)

Influence of sintering temperature on volume electric resistance and absorption of electromagnetic energy of pressureless sintered AlN–SiC composites
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)

Microstructural characteristics and thermal conductivity of large-size parts from pressureless sintered ceramic AlN-base composite
von: D. V. Chasnyk, et al.
Veröffentlicht: (2023)