Buchumschlag

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	A. G. Chernjatevich, L. S. Molchanov, V. V. Vakulchuk, P. O. Jushkevich, A. S. Kobeljatskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001243633
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2018)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Assessment of the postcombustion process in the cavity of the working space of the oxygen converter based on assessment of the physical parameters of flue gases and flame
von: T. S. Holub, et al.
Veröffentlicht: (2022)

Method of calculation of exhaust gases emissions of biogas engine
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)

Method of calculation of exhaust gases emissions of biogas engine
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)

Method of calculation of exhaust gases emissions of biogas engine
von: F. I. Abramchuk, et al.
Veröffentlicht: (2013)

Analysis of information on decarburization process bath converter
von: K. V. Egorov, et al.
Veröffentlicht: (2014)

Behavior pattern of temperature condition of converter bath
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2011)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

The Exhaust Gases of Internal-Combustion Engines Neutralization Systems Evolution
von: S. V. Bojchenko, et al.
Veröffentlicht: (2010)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

Regulation of the termination of purge in BOF process
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2015)

Selection and Transformation of Energy of Exhaust Gases of Rotary Kilns for Industrial Heating
von: V. D. Petrash, et al.
Veröffentlicht: (2013)

Use of the heat of the exhaust gases of industrial furnaces by the method of thermochemical recuperation
von: Yatsenko V.P., et al.
Veröffentlicht: (2014)

Analysis of the electrical characteristics of the converter when melting steel bath
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Improvement of the cleaning system for drilling wheels with purging
von: A. N. Davidenko, et al.
Veröffentlicht: (2017)

Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
von: T. S. Golub, et al.
Veröffentlicht: (2024)

Catalytic Activity of Palladium Containing Coating in Neutralization Reactions of Exhaust Gases of Internal Combustion Engine
von: T. A. Nenastina, et al.
Veröffentlicht: (2014)

Study of changes in the structural and chemical composition of periclase-carbonate refractories in the process of operation as the lining of oxygen converters
von: L. S. Molchanov, et al.
Veröffentlicht: (2022)

Salculation of the Parameters of Exhaust Gases Coal-Fired Thermal Power Plants Based on Solid Fuel Characteristics
von: I. A. Volchyn, et al.
Veröffentlicht: (2016)

Influence of the application of pulverized coal and natural gas in blast furnace on exergy indicators of technological system &quot;blast furnace-oxygen converter&quot;
von: A. L. Chajka, et al.
Veröffentlicht: (2018)

Modeling of adsorption and desorption of hydrocarbons in nanoporous catalisators of neutralizing systems of exhaust gases using nonlinear Langmuir isoterm
von: M. R. Petrik, et al.
Veröffentlicht: (2018)

Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: M. V. Gubinskij, et al.
Veröffentlicht: (2017)

Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: Gubinskii M.V., et al.
Veröffentlicht: (2017)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

The device of definition of the extent of oxidation of carbon to the oxide in the converter cavity
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2016)

Influense of blowing of Inert gas purge in the tundish on the distribution of non-metallic Inclusions
von: V. G. Efimova, et al.
Veröffentlicht: (2014)

Modeling of heat and mass transfer, adsorption and desorption of hydro-carbons in nanoprous zeolite-catalisators of neutralizing systems of exhaust gases
von: M. R. Petrik, et al.
Veröffentlicht: (2018)

Determination of the optimal conditions of implementing the process of thermochemical recuperation for using the heat of exhaust gases of a gas-turbine plant
von: O. A. Shraiber
Veröffentlicht: (2015)

Determination of the optimal conditions of implementing the process of thermochemical recuperation for using the heat of exhaust gases of a gas-turbine plant
von: Шрайбер О.А.
Veröffentlicht: (2015)

Experience in developing the oxygen lance with tip central cooling
von: A. G. Chernjatevich
Veröffentlicht: (2017)

Students Structure Purges in Higher Education Institutes in Soviet Ukrainian in 1920&#039;s
von: O. L. Riabchenko
Veröffentlicht: (2010)

Influence of oxygen atmosphere on microstructure and physicochemical properties of complex cuprates fabricated by sol–gel method
von: I. V. Fesich, et al.
Veröffentlicht: (2012)

Directions of scientific and technological research on reducing of saturation by gases of converter steel
von: V. F. Poljakov, et al.
Veröffentlicht: (2013)

The new technologies and lance improvement for the converter slag scull coating
von: A. G. Chernjatevich
Veröffentlicht: (2014)