Buchumschlag

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	V. H. Razdobrieiev, D. H. Palamar
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001243636
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties
von: S. A. Vorobej, et al.
Veröffentlicht: (2017)

Effect of carbon on the corrosion behavior of thermally hardened rolled products
von: V. H. Razdobrieiev
Veröffentlicht: (2020)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

Investigation of interrelation of mechanical characteristics, microstructure and informative parameters of NDT
von: M. O. Karpash
Veröffentlicht: (2012)

Preparation of the surface of hot-rolled strips for hot-dip galvanized
von: V. G. Ivanchenko
Veröffentlicht: (2014)

Production of highstrength titanic strips by consolidation of powder using technology of asymmetrical rolling
von: K. A. Gogaev, et al.
Veröffentlicht: (2016)

Analysis of the asymmetrically rolling parameters of titanium powder
von: Ju. Prikhodko, et al.
Veröffentlicht: (2015)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Mathematical and software for the study of the dynamics of the finished rolling mill block wire mill
von: V. I. Bolshakov, et al.
Veröffentlicht: (2018)

The relationship between microstructure and fracture parameters when the drop weight tear test of hot rolling low carbon microalloyed linepipe steel
von: I. F. Pemov, et al.
Veröffentlicht: (2012)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
von: J. Zhang, et al.
Veröffentlicht: (2020)

Statistical assessment of formation of foreign trade of Ukraine in finished food products
von: P. O. Antoniuk, et al.
Veröffentlicht: (2021)

Before food about the decision of border mines to the process of rolling-fiber in balanced roller fibers
von: Yu. Kliuchnikov, et al.
Veröffentlicht: (2021)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)

Formation of compounds of dissimilar metals in a solid phase by the method of hot rolling in vacuum
von: B. V. Borts
Veröffentlicht: (2011)

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

Training hot rolled strips and sheets of especially thin
von: V. S. Panchenko, et al.
Veröffentlicht: (2014)

Longitudinal and normal stresses at the source of deformation at asymmetrical strip rolling
von: V. A. Nikolaev
Veröffentlicht: (2009)

Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Effect of titanium carbides on the formation of microstructure and improvement of mechanical characteristics of the weld metal
von: I. K. Pokhodnia, et al.
Veröffentlicht: (2018)

Modern trends in the production of corrosion-resistant and fire-resistant stress-free reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)

Analytical study of technological and design parameters of section casting-and-rolling unit&#039;s influence on finished rolled steel accuracy
von: S. I. Badjuk
Veröffentlicht: (2013)

Peculiarities of microstructure of multilayer welds with different susceptibility to hot cracking
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)

Investigations of the quality of wrought semi-finished products of VT9 titanium alloy produced by electron beam melting
von: S. V. Akhonin, et al.
Veröffentlicht: (2021)

Features of internal monitoring of payments with buyers and realization of finished products
von: T. D. Markova, et al.
Veröffentlicht: (2018)

Investigation of the Influence of Melt Stirring on the Formation of Macro- and Microstructures
von: A. G. Borisov
Veröffentlicht: (2014)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

. Comprehensive finite element study of titanium strip production processes using asymmetric cold rolling of powder with subsequent sintering
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)

Aspects of the account of calculations with buyers and customers for finished products in modern conditions
von: T. D. Markova, et al.
Veröffentlicht: (2018)

Modified nanocomposite materials for UV-technologies for products finishing printing by lamination
von: V. H. Sysiuk, et al.
Veröffentlicht: (2020)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: Makeeva, A.S., et al.
Veröffentlicht: (2016)

Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
von: D. Drimal, et al.
Veröffentlicht: (2019)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)