Cover Image

. Comprehensive finite element study of titanium strip production processes using asymmetric cold rolling of powder with subsequent sintering

Saved in:

Bibliographic Details
Date:	2019
Main Authors:	Ju. Prikhodko, M. A. Dedik, S. Brandt, K. A. Gogaev, A. I. Itsenko, V. S. Voropaev
Format:	Article
Language:	English
Published:	2019
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001243637
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Analysis of the asymmetrically rolling parameters of titanium powder
by: Ju. Prikhodko, et al.
Published: (2015)

Production of highstrength titanic strips by consolidation of powder using technology of asymmetrical rolling
by: K. A. Gogaev, et al.
Published: (2016)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
by: Ju. Prikhodko, et al.
Published: (2013)

Estimation of the real effectiveness of cold-rolled strip flatness control with selectivity emulsion feeding
by: Ju. Prikhodko
Published: (2013)

Longitudinal and normal stresses at the source of deformation at asymmetrical strip rolling
by: V. A. Nikolaev
Published: (2009)

On the role of hydrogen in sintering of titanium powders
by: D. H. Savvakin, et al.
Published: (2011)

Status and trends of development of the production of cold-rolled tubes from titanium alloys
by: A. V. Mishchenko
Published: (2019)

Modeling valkovoe casting-rolling of aluminum by finite element method
by: Ju. Prikhodko, et al.
Published: (2014)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
by: Ju. Prikhodko, et al.
Published: (2019)

The peculiarities of rolling on combined strip mill
by: V. A. Nikolaev, et al.
Published: (2011)

Peculiarities of cold strip rolling technology and development of the method of calculation for deformation modes on two stand reversing mills
by: Ja. D. Vasilev, et al.
Published: (2018)

Surfacing powder strips (Review)
by: A. P. Zhudra, et al.
Published: (2012)

Determination of Particular Relative Reduction in Cold Rolling of Thin and Extra Thin Strips to Implement the Process with the Least Force
by: Ya. D. Vasilev, et al.
Published: (2022)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
by: V. A. Nikolaev, et al.
Published: (2009)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)

Salculation of Temperature in strips casting-rolling steel
by: A. V. Nogovitsyn, et al.
Published: (2014)

Influence of the special features of contact interaction of the thin strip with rolls on the parameters of the initial setting of the working stand and the least thickness of the rolled strip
by: Ja. D. Vasilev, et al.
Published: (2019)

Simplified Modelling of Tandem Cold Rolling
by: Slimani, K., et al.
Published: (2018)

Training hot rolled strips and sheets of especially thin
by: V. S. Panchenko, et al.
Published: (2014)

Steel strip solidification in twin-roll casting unit
by: N. I. Tarasevich, et al.
Published: (2016)

The influence of oxidation on the corrosion resistance of sintered titanium
by: A. A. Skrebtsov, et al.
Published: (2013)

Effect of deformation and crystal size of mechanically alloyed and tempered composite tungsten powders with titanium additives on the sintering process
by: Jahangiri, H., et al.
Published: (2018)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
by: Çavdar, U., et al.
Published: (2014)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
by: U. Зavdar, et al.
Published: (2014)

Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
by: E. N. Shebanits, et al.
Published: (2012)

Synthesis of Si3N4—ZrN composite powder without subsequent milling
by: I. V. Kud, et al.
Published: (2020)

Structural-phase states of titanium after an electro-explosive alloying and the subsequent electron-beam treatment
by: S. V. Karpij, et al.
Published: (2010)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
by: A. S. Makeeva, et al.
Published: (2016)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
by: Makeeva, A.S., et al.
Published: (2016)

The Mathematical Simulation of Electromechanical Systems of Cold Rolling Mills
by: E. S. Nazarova
Published: (2015)

Preparation of the surface of hot-rolled strips for hot-dip galvanized
by: V. G. Ivanchenko
Published: (2014)

Prediction of solidification parameters for twin-roll thin strip casting
by: N. I. Tarasevich, et al.
Published: (2016)

Possible options for the production of tinplate and cold-rolled sheet in Ukraine
by: Ju. V. Konovalov, et al.
Published: (2015)

Strip rolling process stability estimation by the torque in the rollers driving line
by: V. V. Verenev, et al.
Published: (2013)

Study sintering conditions of mechanically activated powders based on copper
by: O. V. Vlasova, et al.
Published: (2014)

Brazing of titanium aluminide by rapidly-hardened strips
by: S. V. Maksimova, et al.
Published: (2010)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
by: E. M. Lutsak, et al.
Published: (2017)

Cold rolling improving at the expense of usage degree prediction of reserve plasticity
by: A. G. Prisjazhnyj
Published: (2014)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
by: V. V. Ivzhenko, et al.
Published: (2021)