Cover Image

Averaging of Push-Pull DC Converter Model

Saved in:

Bibliographic Details
Date:	2018
Main Author:	Ju. V. Rudenko
Format:	Article
Language:	English
Published:	2018
Series:	Technical Electrodynamics
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000844309
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Transformer faultiness influence on processes at forward push-pull converter
by: Ju. V. Rudenko
Published: (2014)

Mode of averaging of pulse DC converter model
by: Ju. V. Rudenko
Published: (2017)

Application of the average method for analysis of dc voltage converters with interrupted currents in inductive elements
by: Yu. V. Rudenko
Published: (2020)

Robacta Drive TPS/i — самая компактная в мире горелка системы Push-Pull для роботизированного применения
Published: (2016)

Averaging of pulse converter model with second degree circuit
by: Ju. V. Rudenko, et al.
Published: (2018)

Calculation of DC converters in discontinuous conduction mode using the averaging method based on lagrange theorem
by: Yu. V. Rudenko
Published: (2023)

Modeling of processes on the basis of state space averaging in boost converter with magnetically coupled elements
by: Yu. V. Rudenko
Published: (2021)

DC/DC converter with metered energy extraction and transmission
by: I. V. Volkov, et al.
Published: (2020)

Sliding Mode Control of DC/DC Buck Converter in the Basis of Energy
by: Ju. V. Skurjatin, et al.
Published: (2014)

Calculation of Cuk converter using the averaging method based on Lagrange theorems
by: Yu. V. Rudenko
Published: (2022)

Features of calculation of semiconductor voltage converters based on state-space averaging
by: Yu. V. Rudenko
Published: (2020)

The DC-DC converters EMI filters calculation method using LTspice
by: V. V. Makarenko, et al.
Published: (2022)

Design and control of a DC-DC buck converter using discrete Takagi-Sugeno fuzzy models
by: Ayada, A., et al.
Published: (2025)

Analysis of processes in a CUK converter with isolated structure using the averaging method
by: Yu. V. Rudenko
Published: (2022)

Optimal coupling coefficient calculation for inductances in interleaved bidirectional DC-DC converters
by: K. Tytelmaier, et al.
Published: (2018)

Bipolar DC output fed grounded DC-AC converter for photovoltaic application
by: Sindhuja, R., et al.
Published: (2023)

Modeling of intensity of external migration of Ukrainian population in the conditions of strengthening of the push environment
by: O. O. Levytska, et al.
Published: (2020)

Design of cascaded voltage control systems of bidirectional DC-DC buck-boost converters
by: S. M. Peresada, et al.
Published: (2024)

EFFICIENCY EVALUATION TECHNIQUE OF THE SEMICONDUCTOR DC-DC CONVERTER APPLICATION IN THE POWER-SUPPLY SYSTEM
by: Poliakov, M. A., et al.
Published: (2016)

Methods of increasing efficiency and improving the main parameters of DC/DC converters with a longitudinal switc
by: I. V. Volkov, et al.
Published: (2020)

About the Possibility of Switching Losses Reducing in of Two-Stage DC-DC Converters with Separated Commutation
by: V. V. Ivakhno, et al.
Published: (2014)

Features of binary melt solidification at variable crystal pulling rate
by: Kanishchev, V.N., et al.
Published: (2011)

Transmission Electron Microscopy Past and Present: Pushing the Limits of Cognition
by: A. G. Derzhipolskij, et al.
Published: (2012)

Analysis of a DC converter working on a plasma arc
by: Vereshchago, E. M., et al.
Published: (2023)

Determining of the Controller Parameters of the QZS DC/DC Converter Control System Providing Small Signal Stability
by: O. O. Husev
Published: (2013)

Research of a bi-directional DC-DC converter of unified inverter module for application in energy accumulation systems
by: A. F. Zharkin, et al.
Published: (2018)

Developing a method and a device to convert DC from PV converters into three-phase sinusoidal voltage
by: E. A. Bekirov
Published: (2013)

Features of regulation of pulls of ropes multirope lifting options with by monosectional declining pulleys
by: S. R. Ilin, et al.
Published: (2016)

Fuzzy maximum power point tracking compared to sliding mode technique for photovoltaic systems based on DC-DC boost converter
by: Nebti , K., et al.
Published: (2021)

Integrating dual active bridge DC-DC converters: a novel energy management approach for hybrid renewable energy systems
by: Sabhi, K., et al.
Published: (2025)

Bidirectional DC/AC converter for flexible distributed energy integration into AC microgrids
by: Vinh, N. T., et al.
Published: (2026)

Development of main cracks in a gas-saturated coal bed at the stationary pushing of coalface
by: N. A. Kalugina, et al.
Published: (2014)

Experimental study of electromagnetic disturbances in common and differential modes in a circuit based on two DC/DC boost static converter in parallel
by: Benazza, B., et al.
Published: (2023)

Detection and avoidance of input validation attacks in web application using deterministic push down automata
by: V. Nitja, et al.
Published: (2019)

Calibration of measuring channel automated system for monitoring of mine line pull multiple-lifting equipment
by: S. R. Ilin, et al.
Published: (2016)

Measurement and analysis of common and differential modes conducted emissions generated by an AC/DC converter
by: Zeghoudi, A., et al.
Published: (2022)

Stress State of the Pulled Up Adhesive Connection of the Plate with the Circular Hole and the Concentrically Placed Plate
by: S. S. Kuriennov, et al.
Published: (2022)

Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
by: Xua, L., et al.
Published: (2019)

AN EFFECTIVE CONTROL OF AN ISOLATED INDUCTION GENERATOR SUPPLYING DC LOAD FOR WIND POWER CONVERTING APPLICATIONS
by: Louze, L., et al.
Published: (2020)

Effect of transformer&#039;s leakage inductance in converters on output power
by: Ju. V. Rudenko, et al.
Published: (2015)