Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	T. O. Prikhna, H. D. Ilnytska, V. I. Lavrinenko, I. M. Zaitseva, M. M. Sheiko, V. V. Smokvyna, V. V. Tymoshenko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2022
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001322032
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Effect of physical and mechanical properties of diamond synthesized in the presence of ferroalloys, to wear resistance rock cutting tool
von: N. V. Novikov, et al.
Veröffentlicht: (2016)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Comparison of the dimensional, physical, mechanical and operational characteristics of synthetic diamond powders of grades AC6 and AC20 synthesized in Ni‒Mn‒C and Fe‒Si‒C systems
von: O. O. Shulzhenko, et al.
Veröffentlicht: (2021)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
von: V. V. Smokvyna, et al.
Veröffentlicht: (2023)

Features of the structural organization of a single-layer diamond-galvanic coating for the ruling tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

Physico-mechanical and operational characteristics of synthetic diamond powders, synthesized with the use of Ni–Mn and Fe–Si carbon solvents
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2019)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review)
von: V. I. Lavrinenko
Veröffentlicht: (2022)

Strength of diamond powders synthesized in the Mg–Zn–B–C system
von: O. I. Cherniienko, et al.
Veröffentlicht: (2012)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
von: H. A. Petasiuk, et al.
Veröffentlicht: (2019)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Diamond electroplated coating with protection by diamond micron powder in a dressing tool. Part 1. Coating deposition conditions
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Influence of physicomechanical and physicochemical characteristics of synthetic diamonds AC20 100/80 after separation in magnetic and electric fields on wear-resistance of the grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2018)

Dielectric properties of synthetic diamond polycrystals
von: L. O. Romanko, et al.
Veröffentlicht: (2024)

Estimation of the quality of coatings of metalized grinders of synthetic diamond
von: E. A. Pashchenko, et al.
Veröffentlicht: (2017)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
von: H. A. Petasiuk, et al.
Veröffentlicht: (2023)

Influence of productivity diamond abrasive treatment on the surface morphology wear diamond crystals
von: A. M. Kuzej, et al.
Veröffentlicht: (2016)

Flotation separation as a method of improving the uniformity of synthetic diamond powders according to their morphometric characteristics, grain shape and grain composition
von: G. A. Petasyuk, et al.
Veröffentlicht: (2024)

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
von: H. A. Petasiuk, et al.
Veröffentlicht: (2017)

Size separation of diamond nanopowders synthesized by detonation
von: G. P. Bogatyrjova, et al.
Veröffentlicht: (2012)

Effect of thermobaric treatment on the structural and phase transformations in diamonds with lonsdalite, natural and synthetic diamonds
von: A. V. Nozhkina, et al.
Veröffentlicht: (2016)

The analysis of products of wear of diamond - containing composite material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2019)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

Development and Application of Hign-Performance Precision Diamond Dressing Tools for Needs of Power and Transport Engineering of Ukraine
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
von: A. Kurio, et al.
Veröffentlicht: (2012)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
von: Kurio, A., et al.
Veröffentlicht: (2012)

Diagnosis of performance characteristic of diamond powders
von: M. N. Safonova, et al.
Veröffentlicht: (2017)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2016)

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
von: H. A. Petasiuk, et al.
Veröffentlicht: (2022)

Physical and chemical properties of synthetic diamonds, which are plated composite coating
von: E. A. Pashchenko, et al.
Veröffentlicht: (2016)

Indirect determination of the thickness of the coating of synthetic diamond powders using new 3D models of their grain
von: H. A. Petasiuk
Veröffentlicht: (2021)

A new group averaging approach to diagnostics of technological properties of high-strength synthetic diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2022)

On the interaction of the detonation-synthesized ultradisperse diamond and turbostratic boron nitride
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2018)