Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	V. A. Mechnyk, M. O. Bondarenko, T. O. Prikhna, V. M. Kolodnitskyi, Ye. Moshchil, V. V. Strelchuk, A. S. Nikolenko, E. S. Hevorkian, V. A. Chyshkala
Format:	Artikel
Sprache:	English
Veröffentlicht:	2022
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001322035
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Influence of VN additive on the structure and strength characteristics of diamond-containing composites based on the Fe-Cu–Ni–Sn matrix formed by the method of cold pressing followed by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

Formation of Fe-Cu-Ni-Sn-VN nanocrystalline matrix by vacuum hot pressing for diamond-containing composite. mechanical and tribological properties
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Structure and compositional properties diamond materials (Fe-Cu-Ni-Sn) obtained by hot pressing
von: E. S. Hevorkian, et al.
Veröffentlicht: (2015)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
von: V. A. Mechnik, et al.
Veröffentlicht: (2018)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

Use of simulation for homogenization of temperature field in Al2O3 workpiece in the process of hot vacuum pressing
von: V. A. Dutka, et al.
Veröffentlicht: (2020)

Composite materials of diamond−(Co–Cu–Sn) system with improved mechanical characteristics. Part 1. The influence of hot re-pressing on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2015)

Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)

The study of the characteristics of pressing and vacuum sintering of the powder mixture of iron-silicon
von: L. A. Sosnovskij, et al.
Veröffentlicht: (2018)

Temperature effects in hot pressing composite diamond - (Fe–Cu–Ni–Sn) on the structure, mechanical and operational
von: V. A. Mechnik, et al.
Veröffentlicht: (2017)

Structure and properties of hot-pressed materials based on AlB12C2
von: T. A. Prikhna, et al.
Veröffentlicht: (2017)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Y. Tьlay, et al.
Veröffentlicht: (2019)

The effect of the duration of external uniaxial compression on the density of hard alloys VK20 and VN20 during their final sintering in vacuum
von: V. P. Bondarenko, et al.
Veröffentlicht: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tülay Yıldız, et al.
Veröffentlicht: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tulay Yildiz, et al.
Veröffentlicht: (2018)

Diamond composite materials diamond–Fe–Cu–Ni–Sn with predictable stable characteristics
von: V. A. Mechnyk
Veröffentlicht: (2012)

Thermal conductivity of hot-pressed AlB12–AlN ceramic composite
von: T. O. Prikhna, et al.
Veröffentlicht: (2024)

Influence of the CrB2 additive content on the structure, mechanical and operational properties of Сdiamond–(WC–Co) composite diamond-containing materials formed by spark plasma sintering
von: B. T. Ratov, et al.
Veröffentlicht: (2023)

Structure of Cdiamond–(WC–6Co)–ZrO2 composite materials formed by electric plasma-spark sintering
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
von: J. Zhang, et al.
Veröffentlicht: (2020)

Tribology of Fe–Cu-Ni-Sn and Fe-Cu–Ni-Sn–VN composites obtained by powder metallurgy methods
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Erosion behavior of materials on basis of tungsten hot pressed in vacuum under mirror Penning discharge plasma impact
von: Glazunov, G.P., et al.
Veröffentlicht: (2007)

Regularities of structure formation in the system diamond–Fe–Cu–Ni–Sn–CrB2
von: V. A. Mechnyk
Veröffentlicht: (2013)

The research results of influence conditions of sintering of VN20 (80% WC + 20 % WT. NI) hard alloy in vacuum under external uniaxial static pressure on its shrinkage and density
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Structural changes of vanadium nitride under the conditions of thermobaric sintering in the cBN-VN-Al ceramic composite
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2021)

Formation of multicomponent solid solutions in cBN—TiC— VN —Al system at high pressure composite sintering
von: N. M. Belyavina, et al.
Veröffentlicht: (2024)

Estimation of influence of interaction of carbon with compound of carbides, borides, nitrides, silicides on structure and properties of composites Diamond-Fe-Cu-Ni-Sn
von: V. A. Mechnyk
Veröffentlicht: (2011)

Hot isostatic pressing of potassium-magnesium-phosphate materials for cesium immobilization
von: Sayenko, S.Y., et al.
Veröffentlicht: (2018)

Phase formation and diamond retention in Cdiamond‒(WC‒Co)‒ZrO2 composites sintered by the spark-plasma sintering method
von: B. T. Ratov, et al.
Veröffentlicht: (2024)

Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2017)

The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)

Effect of ZrO2 content on the strength characteristics of the matrix material of Cdiamond–(WC–Co) composites produced by spark plasma sintering
von: B. T. Ratov, et al.
Veröffentlicht: (2024)

ТРИБОЛОГІЯ КОМПОЗИТІВ Fe-Cu-Ni-Sn і Fe-Cu-Ni-Sn-VN, ОДЕРЖАНИХ МЕТОДАМИ ПОРОШКОВОЇ МЕТАЛУРГІЇ
von: Мечник, В. А., et al.
Veröffentlicht: (2019)

Трибология композитов Fe−Cu−Ni−Sn и Fe−Cu−Ni−Sn−VN, полученных методами порошковой металлургии
von: Мечник, В.А., et al.
Veröffentlicht: (2019)