Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic

Збережено в:

Бібліографічні деталі
Дата:	2022
Автори:	H. A. Petasiuk, Yu. V. Syrota
Формат:	Стаття
Мова:	English
Опубліковано:	2022
Назва видання:	Superhard Materials
Онлайн доступ:	http://jnas.nbuv.gov.ua/article/UJRN-0001322040
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Репозитарії

Library portal of National Academy of Sciences of Ukraine | LibNAS

Схожі ресурси

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2019)

The homogeneity of abrasive powders by the shape-similarity of the projection of the grains and the method of its determination
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2020)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2023)

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2017)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
за авторством: V. G. Poltoratskij, та інші
Опубліковано: (2016)

Flotation separation as a method of improving the uniformity of synthetic diamond powders according to their morphometric characteristics, grain shape and grain composition
за авторством: G. A. Petasyuk, та інші
Опубліковано: (2024)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2024)

Expansion of the applied capabilities of the search-analog method for identifying the shape of the projection of abrasive powders grains
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2021)

Indirect determination of the thickness of the coating of synthetic diamond powders using new 3D models of their grain
за авторством: H. A. Petasiuk
Опубліковано: (2021)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
за авторством: G. A. Petasjuk, та інші
Опубліковано: (2018)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2016)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2013)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2024)

A new group averaging approach to diagnostics of technological properties of high-strength synthetic diamond powders
за авторством: H. A. Petasiuk
Опубліковано: (2022)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2022)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
за авторством: V. V. Smokvyna, та інші
Опубліковано: (2023)

A system-analogue method of identification of geometric shape of the abrasive grain projection
за авторством: H. A. Petasiuk
Опубліковано: (2016)

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition
за авторством: V. G. Poltoratskij, та інші
Опубліковано: (2019)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
за авторством: V. P. Afanasev, та інші
Опубліковано: (2016)

Study of the effect of matching the actual geometric parameters of the grain and its adopted 3D model on the error of determining the thickness of the coating of diamond powders
за авторством: H. A. Petasiuk
Опубліковано: (2023)

Picnometric-additive method for determining the degree of coating of grinding powders superhard matirials with the use of an extrapolation-affine 3D grain model
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2020)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2021)

Determination of structural homogeneity of synthetic diamonds from analysis of Kikuchi lines intensity distribution
за авторством: I. Fodchuk, та інші
Опубліковано: (2010)

Determination of structural homogeneity of synthetic diamonds from analysis of Kikuchi lines intensity distribution
за авторством: Fodchuk, I., та інші
Опубліковано: (2010)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
за авторством: S. V. Rjabchenko, та інші
Опубліковано: (2018)

A study of the tendency and extent of variation of morphometric characteristics of standard synthetic diamond grits in a continuous series of their grades and sizes
за авторством: H. A. Petasiuk, та інші
Опубліковано: (2018)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
за авторством: T. O. Prikhna, та інші
Опубліковано: (2022)

Development of diamond grinding ribbons on rubber bond
за авторством: V. M. Bychykhin, та інші
Опубліковано: (2018)

Grinding of gear wheels by diamond-abrasive wheels
за авторством: S. V. Rjabchenko
Опубліковано: (2017)

Formation of crystal stock in the process of the plate shape for type Ib large synthetic diamond single crystals
за авторством: G. Gao, та інші
Опубліковано: (2020)

Analytical determination of the number of grains in a carat of diamond powder using an extrapolation–affine 3D model of a grain
за авторством: G. A. Petasjuk, та інші
Опубліковано: (2012)

Specifying the process parameters for diamond dressing of grinding wheels
за авторством: Ya. O. Shakhbazov, та інші
Опубліковано: (2019)

Diamond grinding of ceramic balls with a circular feed
за авторством: S. V. Sokhan, та інші
Опубліковано: (2023)

Diamond grinding of ceramic balls with a circular feed
за авторством: S. V. Sokhan, та інші
Опубліковано: (2024)

Dielectric properties of synthetic diamond polycrystals
за авторством: L. O. Romanko, та інші
Опубліковано: (2024)

Effect of thermobaric treatment on the structural and phase transformations in diamonds with lonsdalite, natural and synthetic diamonds
за авторством: A. V. Nozhkina, та інші
Опубліковано: (2016)

Influence of physicomechanical and physicochemical characteristics of synthetic diamonds AC20 100/80 after separation in magnetic and electric fields on wear-resistance of the grinding tool
за авторством: V. I. Lavrinenko, та інші
Опубліковано: (2018)

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
за авторством: V. G. Poltoratskij
Опубліковано: (2019)

Physico-mechanical and operational characteristics of synthetic diamond powders, synthesized with the use of Ni–Mn and Fe–Si carbon solvents
за авторством: G. D. Ilnitskaja, та інші
Опубліковано: (2019)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
за авторством: A. A. Adamovskij, та інші
Опубліковано: (2015)