Buchumschlag

Modern methods of manufacturing three-layer panels from aluminium alloys (Review)

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	Ju. V. Falchenko, L. V. Petrushinets
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000879151
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Possibilities of manufacturing three-layer welded honeycomb panels from aluminium alloys
von: L. V. Petrushinets, et al.
Veröffentlicht: (2018)

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels
von: L. V. Petrushynets, et al.
Veröffentlicht: (2022)

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding
von: I. A. Gusarova, et al.
Veröffentlicht: (2016)

Modern methods of welding of aluminium alloys with steels (Review)
von: D. M. Kaleko
Veröffentlicht: (2012)

Evaluation of the possibility of manufacturing and repairing engine parts from aluminium alloys by method of additive technology
von: M. O. Gnatenko, et al.
Veröffentlicht: (2018)

Modern technological methods of pressure welding of magnesium alloys (Review)
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2022)

Manufacture of stainless steel – aluminium transition pieces using method of pressure welding in vacuum
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Peculiarities of alloying of welded joint metal of highstrength aluminium alloy with scandium
von: V. E. Fedorchuk, et al.
Veröffentlicht: (2014)

Welded Structures from Aluminium Alloys
von: T. M. Labur
Veröffentlicht: (2020)

Formation of diffusion zone in welded joints of porous aluminium alloy with monolithic magnesium alloy at chemical activation by gallium
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2017)

Electron beam welding of thin-sheet three- dimensional structures of aluminium alloys
von: A. A. Bondarev, et al.
Veröffentlicht: (2011)

The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
von: V. V. Girzhon, et al.
Veröffentlicht: (2009)

Manufacturing and investigation of thin-film aluminium-alumina nanostructures
von: T. S. Lebiedieva, et al.
Veröffentlicht: (2018)

Deformation-free welding of stringer panels from titanium alloy VT20
von: B. E. Paton, et al.
Veröffentlicht: (2014)

Hybrid plasma-arc welding of thin-walled panels from aluminuim alloy
von: V. N. Korzhik
Veröffentlicht: (2017)

Development of laser welding of aluminium alloys at the E. O. Paton Electric Welding Institute (Review)
von: Ju. Khaskin
Veröffentlicht: (2013)

Operational control of the quality and stressed state of welded panels from Vt-20 alloy by digital shearography methods
von: L. M. Lobanov, et al.
Veröffentlicht: (2018)

Distribution of chemical elements in the zone of joining of aluminium alloy AMg6 with titanium alloy VT6 produced using diffusion welding in vacuum
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2013)

Analysis of the properties and features of high-strength deformable aluminium alloys of Al-Li, Al-Cu-Mn systems used in the aerospace industry in manufacture of welded structures (Review)
von: V. I. Zagornikov
Veröffentlicht: (2024)

The interaction Casting from aluminium alloys with Metallic form
von: F. M. Kotljarskij
Veröffentlicht: (2014)

Modern methods of manufacturing bimetallic products
von: V. P. Likhoshva, et al.
Veröffentlicht: (2018)

Formation of Aluminium Surface Layers’ Structure during Laser Alloying with Copper and Cobalt Powders
von: Girzhon, V.V., et al.
Veröffentlicht: (2013)

Mechanical properties and structural features of butt joints produced at FSW of aluminium alloys of different alloying systems
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2023)

Free vibrations of layered cylindrical panels at dynamic nonlinear deformation
von: T. V. Horiachko, et al.
Veröffentlicht: (2014)

The Prospect Methods of Ash-Free Coal Manufacture from Power-Generating Coals (Review)
von: A. M. Osipov, et al.
Veröffentlicht: (2010)

Evaporation of thin layers on top of solar panels by means of lazer
von: V. P. Harashchuk, et al.
Veröffentlicht: (2012)

Application of thermal spraying methods for manufacture of resistant coatings (Review)
von: Ju. S. Borisov, et al.
Veröffentlicht: (2018)

Centrifugal rheocasting technology of aluminium alloys
von: A. I. Semenchenko, et al.
Veröffentlicht: (2015)

In- process quality control of welded panels of VT20 alloy using method of electron shearography
von: L. M. Lobanov, et al.
Veröffentlicht: (2011)

Method for determining methane emission into tunnels of panels
von: S. P. Mineev, et al.
Veröffentlicht: (2013)

Welding manufacturing in gas turbine construction (Review)
von: V. V. Romanov, et al.
Veröffentlicht: (2010)

Influence of temperature of heating in vacuum on behaviour of oxide film on the surface of γ-TiAl intermetallic alloy
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2017)

Modifying of hypereutectic aluminium alloys with the use of active additions
von: Ju. P. Skorobagatko
Veröffentlicht: (2009)

Formation of Aluminium Surface Layers&#039; Structure during Laser Alloying with Copper and Cobalt Powders
von: V. V. Girzhon, et al.
Veröffentlicht: (2013)

Structural Modification of AD-1 Aluminium Alloy by the Method of Cold Rolling with Shift
von: V. M. Varyukhin, et al.
Veröffentlicht: (2015)

Structural Modification of AD-1 Aluminium Alloy by the Method of Cold Rolling with Shift
von: Varyukhin, V.M., et al.
Veröffentlicht: (2015)

Brazing of titanium alloys using brazing alloys based on aluminium
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method
von: S. Adjamskiy, et al.
Veröffentlicht: (2022)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)