Microstructure and properties of multilayer materials on Ti–6Al–4V alloy base, produced by powder technology

Microstructure and properties of multilayer materials on Ti–6Al–4V alloy base, produced by powder technology

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	O. M. Ivasishin, P. E. Markovskij, D. G. Savvakin, V. I. Bondarchuk, A. A. Stasjuk, S. V. Prikhodko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2018
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000926148
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)

Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: Ivasishin, O.M., et al.
Veröffentlicht: (2018)

Producing of high-strength titanium alloy Ti–1.5Al–6.8Mo–4.5Fe by EBM method
von: S. V. Akhonin, et al.
Veröffentlicht: (2018)

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part I. Microstructure
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Hydrogen interaction with Ti–Al–V–Fe, Al–V–Fe and Ti–Al–Mo–Fe master alloy powders
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2018)

Corrosion resistance of c.p. titanium and Ti–6Al–4V alloy prepared by powder metallurgy in aqueous solutions of hydrochloric acid
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2020)

Microstructure of titanium alloys produced by the method of layered electron beam surfacing using the wire of grade Ti6AI4V
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2020)

Superplastic behavior of ultrafine-grained Ti−6Al−4V ELI alloy produced by severe plastic deformation
von: Semenova, I.P., et al.
Veröffentlicht: (2006)

Synthesis of high-strength Ti-10V-2Fe-3Al alloy with powder metallurgy approach
von: D. H. Savvakin, et al.
Veröffentlicht: (2009)

The corrosion properties of multilayer coatings deposited on stainless steel and Ti4Al6V substrates
von: Zykova, A., et al.
Veröffentlicht: (2009)

Microstructural features of failure surfaces and low-temperature mechanical properties of Ti-6Al-4V ELI ultra-fine grained alloy
von: Tabachnikova, E.D., et al.
Veröffentlicht: (2008)

Producing of permanent joints of alloys on y-TiAl base using multilayer nanostructured foil Ti/Al applying the method of diffusion welding in vacuum
von: A. I. Ustinov, et al.
Veröffentlicht: (2009)

Producing of powder of Ni-Cr-Al-Y system alloy, alloyed with silicon, using the method of powder metallurgy
von: E. A. Astakhov, et al.
Veröffentlicht: (2010)

Uniformity of microstructure of Ti–TiB alloy produced under the conditions of electron beam remelting
von: P. I. Loboda, et al.
Veröffentlicht: (2019)

Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)

Evolution of Phase Composition and Microstructure upon Synthesis of Zr—Sn Alloy from Zirconium Hydride and Tin Powders
von: D. G. Savvakin, et al.
Veröffentlicht: (2015)

Evolution of Phase Composition and Microstructure upon Synthesis of Zr—Sn Alloy from Zirconium Hydride and Tin Powders
von: Savvakin, D.G., et al.
Veröffentlicht: (2015)

Detonation coatings produced by spraying of alloyed powders based on Fe–Al intermetallics
von: N. V. Vigilianska, et al.
Veröffentlicht: (2024)

Features of the titanium Ti–6Al–4V alloy nanostructuri-zation using reversible alloying with hydrogen
von: E. N. Stepanova, et al.
Veröffentlicht: (2011)

Effect of misrostructural features on corrosion resistance of titanium alloys produced by powder technologies
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2020)

Cavitation erosion of Ti-6Al-4V alloy with vacuum-arc TiN and CrN coatings
von: Kuprin, А.S., et al.
Veröffentlicht: (2018)

Detonation coatings of intermetallic powders of Fe–Al system produced using mechanical alloying
von: Ju. S. Borisov, et al.
Veröffentlicht: (2017)

Electrochemical behaviour of Ti–6Al–4V alloy in Ringer's solution after oxynitration
von: O. V. Tkachuk, et al.
Veröffentlicht: (2018)

Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
von: S. H. Din, et al.
Veröffentlicht: (2018)

Application of SLM-technology for manufacture of dental implants from Ti – 6Al – 4V alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
von: Din, S.H., et al.
Veröffentlicht: (2018)

Synthesis of Alloys Based on Binary Zr—Ti System Using Zirconium Hydride Powder
von: D. G. Savvakin, et al.
Veröffentlicht: (2013)

Microstructure of VT20 titanium alloys produced by method of layer-by-layer electron beam fusion using domestic powder materials
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2019)

Strength and microstructure of ZhS6U alloy brazed joints produced using complex boron- and silicon-containing brazing alloys
von: A. F. Beljavin, et al.
Veröffentlicht: (2010)

Producing multilayer coatings from the gas phase with the participation of TiC and TiN compounds on the hard alloy VK8
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2018)

Influence of microstructure of multilayer Al/Ni foils on phase transformations initiated by heating
von: A. I. Ustinov, et al.
Veröffentlicht: (2022)

Influence of Pulse Laser Radiation on a Composition of the Surface Layers of Titanium Ti—6Al—4V Alloy
von: M. A. Vasilev, et al.
Veröffentlicht: (2015)

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part II. Mechanical properties
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Investigation on microstructure and oxidation behavior of Cr-modified aluminide coating on γ-TiAl alloys
von: Jafarian, H.R., et al.
Veröffentlicht: (2011)

Structural features and wear resistance of the TiAlN coating formed on the Ti–6Al–4V alloy by combining electric arc spraying and gas nitriding methods
von: O. V. Tkachuk, et al.
Veröffentlicht: (2024)

Influence of Phase Composition and Microstructure on Mechanical Behaviour of the Metastable Ti—3Al—4.5Fe—7.2Cr and VT22 Titanium β-Alloys under Tension with Different Rates
von: Markovsky, P.E., et al.
Veröffentlicht: (2016)

Structure formation in multilayer reaction system Ti/Al
von: T. V. Melnichenko
Veröffentlicht: (2013)

Effect of type of power source at 3D printing on structure and properties of Ti–6Al–4V alloy components
von: A. A. Pedash, et al.
Veröffentlicht: (2018)

Characterization of Single SAW Velocities of Ti–6Al–4V Alloy as a Function of Porosity by SAM Simulation for Applications
von: Al-Sayad, Y., et al.
Veröffentlicht: (2018)

Structure and mechanical properties of multilayer vacuum-arc condensates of Ti/Al and Ti/TiAlSi systems
von: A. V. Demchishin, et al.
Veröffentlicht: (2016)