Influence of the technological scheme of manufacture on the structure and properties of high entropy alloys of the system Ti – Cr – Fe – Ni – Cu

Influence of the technological scheme of manufacture on the structure and properties of high entropy alloys of the system Ti – Cr – Fe – Ni – Cu

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	M. V. Marych, A. A. Mamonova, H. A. Bahliuk
Format:	Artikel
Sprache:	English
Veröffentlicht:	2018
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000937800
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The features of structure formation at synthesis of high entropy alloys of Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu and Ti – Cr – Fe – Ni – Cu systems by means of powder metallurgy
von: H. A. Bahliuk, et al.
Veröffentlicht: (2015)

Tracer Diffusion of Cobalt in High-Entropy Alloys AlxFeNiCoCuCr
von: Nadutov, V.M., et al.
Veröffentlicht: (2017)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
von: V. M. Nadutov, et al.
Veröffentlicht: (2016)

Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
von: Nadutov, V.M., et al.
Veröffentlicht: (2016)

Mössbauer and Ultrasonic Study of the As-Cast High-Entropy AlxCuCrCoNiFe Alloys
von: Nadutov, V.M., et al.
Veröffentlicht: (2017)

Structure and mechanical properties of high-entropy AlCuNiFeCr and AlCuNiFeCrTi coatings obtained by electron beam surfacing
von: O. I. Yurkova, et al.
Veröffentlicht: (2017)

The texture features of the deformed CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)

Phase-structural state of the high-entropy of AlcoNiFeCrTi alloy in the process of mechanical alloying and homogenization
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2019)

Properties of coatings of the Al–Cr–Fe–Co–Ni–Cu–V high entropy alloy produced by the magnetron sputtering
von: L. R. Shaginjan, et al.
Veröffentlicht: (2016)

Effect of the structure of vacuum condensates of high entropy alloys of Cr–Fe–Co–Ni–Cu system on their mechanical properties
von: A. I. Ustinov, et al.
Veröffentlicht: (2020)

Structure and phase composition of high-entropy AlCuNiFeTi alloy resulted from mechanical alloying
von: O. I. Yurkova, et al.
Veröffentlicht: (2014)

Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021)

Low-temperature peak of internal friction in high-entropy Al0.5CoCrCuFeNi alloy
von: Ju. A. Semerenko, et al.
Veröffentlicht: (2020)

Hardening of Cr-Fe-Ni-Mn high-entropy alloys caused by the irradiation with argon ions
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2017)

Structure of the High-Entropy CrMnFeCoNi and CrMnFeCoNi2Cu Alloys and Thermal Stability of Its Electrical Transport Properties
von: M. O. Krapivka, et al.
Veröffentlicht: (2015)

Phase and structural evolution during mechanical alloying, subsequent annealing and pressure sintering of AlCuNiFeCr high entropy alloy
von: O. I. Yurkova, et al.
Veröffentlicht: (2015)

Development and smelting of casting high-entropy alloys based on the Fe-Co-Ni-Mn-Cr system
von: O. A. Shcheretskyi, et al.
Veröffentlicht: (2022)

Low-temperature mechanical properties and thermally activated plasticity parameters of the CrMnFeCoNi2Cu high entropy alloy
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2020)

Formation and physicochemical properties of high entropy oxide based on equiatomic alloy CrFeCoNiMn
von: V. F. Gorban, et al.
Veröffentlicht: (2019)

Temperature Dependence of the Acoustic and Mechanical Properties of Cast and Annealed High-Entropy Al0.5CoCuCrNiFe Alloy
von: Ju. A. Semerenko, et al.
Veröffentlicht: (2015)

Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)

Effect of Al Content on Magnetic Properties and Thermal Expansion of As-Cast High-Entropy Alloys AlxFeCoNiCuCr
von: V. M. Nadutov, et al.
Veröffentlicht: (2015)

Effect of Al Content on Magnetic Properties and Thermal Expansion of As-Cast High-Entropy Alloys AlxFeCoNiCuCr
von: Nadutov, V.M., et al.
Veröffentlicht: (2015)

Peculiarities of kinetic and mechanical properties of high-entropy alloy Аl₀.₅CoCuCrNiFe in range ~ 300…77 К
von: Voyevodin, V.N., et al.
Veröffentlicht: (2020)

Influence of plastic deformation on the phase composition, texture, and mechanical properties of the CrMnFeCoNi2Cu high-entropy alloy
von: M. V. Karpets, et al.
Veröffentlicht: (2015)

High-entropy AlCoNiFeCrTiVx coatings obtained by electron-beam cladding
von: O. I. Yurkova, et al.
Veröffentlicht: (2019)

Mechanical properties of high-entropy alloy Al0.5CoCrCuFeNi in temperature region 4.2–300 K
von: M. A. Laktionova, et al.
Veröffentlicht: (2013)

Basics of additive manufacturing processes for high-entropy alloys
von: A. V. Zavdoveev, et al.
Veröffentlicht: (2023)

Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2019)

The influence of copper on the heat resistance of thin foils of high-entropy alloys of the Cr–Fe–Co–Ni–Cu system obtained by the electron beam deposition method
von: A. I. Ustinov, et al.
Veröffentlicht: (2022)

High-entropy superhard coatings based on AlTiCrVNbMo alloy
von: V. F. Horban, et al.
Veröffentlicht: (2020)

Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)

Influence of a cold plastic deformation on the electrical resistivity of CrMnFeCoNi high-entropy alloy
von: Yu. P. Mazur, et al.
Veröffentlicht: (2017)

Mechanical properties of high-entropy alloy Al0.5CoCrCuFeNi in the different structural state in the temperature range 0.5–300 K
von: E. D. Tabachnikova, et al.
Veröffentlicht: (2017)

High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2018)

Influence of high-entropy interlayer of CrMnFeCoNi system on micromechanical properties of joints of high-temperature alloy EI437B
von: V. F. Horban, et al.
Veröffentlicht: (2023)

Study of Structure and Distribution of Chemical Elements in Cast High-Entropy Alloys of AlxFeNiCoCuC System
von: V. M. Nadutov, et al.
Veröffentlicht: (2014)

Comparative analysis of structure and properties of electrodeposited coatings from iron and Fe – Cr – Ni alloy
von: Ye. V. Kolesnyk, et al.
Veröffentlicht: (2016)

Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
von: A. V. Podolskiy, et al.
Veröffentlicht: (2018)

Thermally activated deformation of nanocrystalline and coarse grained CoCrFeNiMn high entropy alloy in the temperature range 4.2–350 K
von: Podolskiy, A.V., et al.
Veröffentlicht: (2018)