Cover Image

Increasing the efficiency of the introduction of the disperse material into the melt under laser treatment conditions

Saved in:

Bibliographic Details
Date:	2018
Main Author:	A. M. Tymoshenko
Format:	Article
Language:	English
Published:	2018
Series:	Metal Science and Treatment of Metals
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000937842
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Melting and crystallization of non-metallic inclusions and steel matrix under laser treatment
by: S. I. Gubenko
Published: (2010)

Possibilities of increasing the effectiveness of magnetoimpulse treatment of melts
by: S. S. Cherepovskij, et al.
Published: (2016)

The peculiarities of speed melting and solidification of non-metallic inclusions under laser treatment of steel
by: S. I. Hubenko, et al.
Published: (2017)

Effect of dispersity of charge materials on processes of aluminothermics in ferrotitanium melting
by: D. A. Kazarin, et al.
Published: (2014)

Calculation of Residual Stresses under Selective Laser Melting of Powders
by: A. V. Gusarov, et al.
Published: (2013)

Increase of water treatment processes efficiency at coagulation of Dnieper water
by: N. A. Klimenko, et al.
Published: (2014)

Shape and geometric sizes of rapid-hardening materials produced by dispersion from melt in IMSM
by: D. A. Kalashnik, et al.
Published: (2016)

Melting under the upper mantle conditions
by: O. V. Usenko
Published: (2011)

Modelling of Thermocapillary Convection within the Molten Pool with the Dispersed Impurity at Laser Surface Hardening of Materials
by: S. N. Grigorev, et al.
Published: (2013)

Melting under the conditions of the upper mantle
by: Usenko, O. V.
Published: (2011)

Problems and prospects of studying the processes of selective laser melting of materials for aerospace engineering (Review)
by: M. V. Sokolovskyi
Published: (2022)

Laser treatment as an additional method to increase the tribotechnical properties of alloys based on cast irons alloyed with Cu and S
by: E. A. Markovskij, et al.
Published: (2017)

Differentiation of melts under conditions of the upper mantle
by: O. V. Usenko
Published: (2012)

Some peculiarities in design of devices for metal melt dispersion
by: V. A. Shapovalov, et al.
Published: (2009)

Distribution of disperse particles in dysphasic gas-laser stream
by: V. L. Najdek, et al.
Published: (2009)

Numerical modeling of heat exchange and hydrodynamics in laser-plasma treatment of metallic materials
by: Ju. S. Borisov, et al.
Published: (2013)

The Features of Fluidized Bed Apparatus of Trough Type Calculation for Disperse Materials Heat Treatment
by: Ju. I. Khvastukhin, et al.
Published: (2011)

Plasma-arc melting on dispersed substrate in mobile horizontal mould
by: V. N. Koleda, et al.
Published: (2012)

Melt instabilities on semiconductor surfaces induced by laser radiation
by: Bonchik, A.Yu., et al.
Published: (2000)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
by: V. I. Dubodelov, et al.
Published: (2015)

Microstructure of melted zone at multiplied laser pulses action
by: I. E. Gnatjuk, et al.
Published: (2003)

The influence of laser treatment on the strengthening of inclusion–steel matrix interphase under plastic deformation
by: S. I. Hubenko
Published: (2017)

Loose disperse systems increase the Possibility of molding sand
by: V. S. Doroshenko, et al.
Published: (2014)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
by: V. I. Dubodelov, et al.
Published: (2015)

Influence of selective laser melting process parameters on the microstructure formation
by: M. A. Latypova, et al.
Published: (2023)

Introduction and perspectives of growing of birch species under the conditions of Kyiv
by: L. I. Parkhomenko
Published: (2002)

Introduction of Innovations under Conditions of Changes in Activity of Domestic Enterprises
by: T. S. Solona, et al.
Published: (2014)

Melting of copper master alloys with highly-reactive metals under conditions of plasma-arc skull melting
by: V. G. Kozhemjakin, et al.
Published: (2016)

Study of the Material Quality of Samples Obtained by Selective Laser Melting (SLM) Method from IN718 Alloy Powder
by: V. V. Klochykhin, et al.
Published: (2021)

Increasing the efficiency of blast-furnace smelting by improving the quality of iron ore materials
by: A. S. Nesterov, et al.
Published: (2019)

Unchanged goals of national libraries under ever-changing conditions (Introduction)
by: A. Onishchenko
Published: (2018)

Introduction of Controlling Into Activity of Major Enterprises for Increase of their Competitiveness
by: O. A. Kniazieva, et al.
Published: (2014)

Increasing the noise immunity of the phase laser ranging systems
by: I. A. Braginets, et al.
Published: (2014)

On the effect of curvature of material particles deformation paths under pressure treatment on plasticity in complex-mode loading conditions
by: V. A. Ogorodnikov, et al.
Published: (2018)

Strength increasing of composite material under conditions of two-stage sintering in a Cdiam-Si system (Review)
by: N. O. Rusinova
Published: (2018)

Effect of hydrothermal treatment on dispersity and magnetic characteristics of synthetic magnetite
by: P. P. Horbyk, et al.
Published: (2011)

Registration Materials for Laser Thermolithography
by: Kryuchyn, A. A., et al.
Published: (2012)

Chromium-manganese materials for welding steels of increased strength without preheating heating and heat treatment
by: V. M. Kulik, et al.
Published: (2012)

Control parameters of magnet-impulsive treatment of melts
by: S. S. Cherepovskij
Published: (2014)

Wetting of nonmetallic materials by metal melts in the conditions simulating conditions of space vacuum and an atmosphere of the Moon
by: V. P. Krasovskij, et al.
Published: (2014)