Cover Image

Corrosion resistence of the hot-pressed B4C–VC ceramic system

Saved in:

Bibliographic Details
Date:	2018
Main Authors:	O. N. Kajdash, V. Z. Turkevich, M. A. Marinich, I. P. Fesenko, V. S. Belovol, V. N. Tkach
Format:	Article
Language:	English
Published:	2018
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000940233
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

The influence of in situ formed TiB2–VB2 borides on the structure and properties of hot-pressed B4C–(TiH2–VC) ceramic system
by: O. N. Kajdash, et al.
Published: (2018)

Study of aeroabrasive wear of hot-pressed materials of the B4C–TiB2 system
by: V. V. Ivzhenko, et al.
Published: (2014)

Thermal conductivity of hot-pressed AlB12–AlN ceramic composite
by: T. O. Prikhna, et al.
Published: (2024)

Influence of TiV2-TiB2-(secondary) borids on stucture, properties and abrasive wear of hot-pressing cmc-composites B4C–(TiV2–TiN2)
by: O. N. Kajdash, et al.
Published: (2018)

Corrosion resistance of VC–FeCr and VC–FeCrSo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)

Study of the influence of TiS additive on physico-mechanical properties of SiC-8B4C-material produced by hot pressing with following siliconizing
by: V. V. Yvzhenko, et al.
Published: (2017)

Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
by: V. V. Ivzhenko, et al.
Published: (2017)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
by: V. V. Ivzhenko, et al.
Published: (2016)

Structure and properties of hot-pressed materials based on AlB12C2
by: T. A. Prikhna, et al.
Published: (2017)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

The influence of B3Si on the structure and properties of B4C ceramics
by: P. V. Mazur, et al.
Published: (2023)

Structure and wear resistance of VC–FeCr and VC–FeCrCo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
by: V. H. Razdobrieiev, et al.
Published: (2022)

Anti-corrosion ceramic coatings on the surface of Nd-Fe-B repelling magnets
by: Taran, A.V., et al.
Published: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Tulay Yildiz, et al.
Published: (2018)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Y. Tьlay, et al.
Published: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Tülay Yıldız, et al.
Published: (2019)

Кинетические закономерности горячего прессования СМС-композитов B₄C–15(VC–TiH₂)
by: Ивженко, В.В., et al.
Published: (2015)

Research of the influence of siliconizing on the structure and properties of hot-pressed polycrystalline silicon carbide
by: V. V. Ivzhenko, et al.
Published: (2018)

The structure of the chromium carbide steel that obtained by hot pressing
by: O. M. Shevchenko
Published: (2015)

The mechanical properties of powder material Ti46Nb4Ta4Al46 obtained by pulsed hot pressing
by: Yu. M. Podrezov, et al.
Published: (2014)

Corrosion stability of SiC-based ceramics in hydrothermal conditions
by: K. V. Lobach, et al.
Published: (2019)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
by: V. A. Mechnyk, et al.
Published: (2020)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
by: B. T. Ratov, et al.
Published: (2021)

Effect of 1. 9-MeV electron irradiation on characteristics of reactively-pressed TiB2-TiS ceramic composites
by: I. N. Totsky, et al.
Published: (2013)

Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
by: Gevorkyan, E., et al.
Published: (2017)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
by: B. T. Ratov, et al.
Published: (2022)

Development of Ceramic Thermal Strength and Corrosion-Resistant Material for Flame Tube of Boiler Burners of Thermal Power Plants
by: O. M. Hryhoriev, et al.
Published: (2012)

Corrosion resistance of vibration weld metal of Fe–Cr–B cored wires
by: H. V. Pokhmurska, et al.
Published: (2016)

Phase formation in the SiC-Al₂O₃-ZrO₂ system during hot pressing by the method of electroconsolidation
by: Vovk, R.V., et al.
Published: (2019)

The influence of the working layer thickness on the properties of hot-pressed powder layered composites
by: H. A. Bahliuk, et al.
Published: (2011)

On the role of crystallographic texture under corrosion of hot-drawn carbon steel rods
by: N. M. Shkatuliak, et al.
Published: (2012)

Increasing the fretting-corrosion fatigue of press joints in sea water
by: V. I. Babinets, et al.
Published: (2021)

Temperature effects in hot pressing composite diamond - (Fe–Cu–Ni–Sn) on the structure, mechanical and operational
by: V. A. Mechnik, et al.
Published: (2017)

Electrical resistance of the islet film of gold on the surface of thermobarically sintered cBN-ceramics
by: I. P. Fesenko, et al.
Published: (2021)

The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
by: O. S. Serhiienko, et al.
Published: (2011)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
by: V. A. Mechnik, et al.
Published: (2018)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
by: B. T. Ratov, et al.
Published: (2022)

ЗАКОНОМІРНОСТІ ЕЛЕКТОІСКРОВОГО СПІКАННЯ КОМПОЗИТІВ СИСТЕМ SІC – TIC, SIC – VC
by: Iвженко, Вячеслав, et al.
Published: (2025)

Cast steel 4Kh4N5M4F2 for hot pressing mold of copper M1 and aluminum alloy AK7ch
by: O. M. Sydorchuk
Published: (2021)