The determination of parameters of a reactor-mixer with a disk injector
Gespeichert in:
| Datum: | 2018 |
|---|---|
| Hauptverfasser: | Y. Yarosh, S. Kukharets, N. Tsyvenkova |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2018
|
| Schriftenreihe: | Vidnovluvana energetika |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000982402 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
THE DETERMINATION OF PARAMETERS OF A REACTOR-MIXER WITH A DISK INJECTOR
von: Yarosh, Y., et al.
Veröffentlicht: (2018)
von: Yarosh, Y., et al.
Veröffentlicht: (2018)
THE SUBSTANTIATION OF THE ELECTRICAL POWER SUPPLY CHANNEL BASED ON THE GAS-GENERATOR INSTALLATION
von: Sokolovskyi, О., et al.
Veröffentlicht: (2019)
von: Sokolovskyi, О., et al.
Veröffentlicht: (2019)
A subharmonic mixer for the 220-325 GHz frequency range
von: A. V. Zorenko, et al.
Veröffentlicht: (2013)
von: A. V. Zorenko, et al.
Veröffentlicht: (2013)
A subharmonic mixer for the 220–325 GHz frequency range
von: Zorenko, A.V., et al.
Veröffentlicht: (2013)
von: Zorenko, A.V., et al.
Veröffentlicht: (2013)
Buncher of electron linac-injector for a synchrotron
von: Chernov, K.N., et al.
Veröffentlicht: (1999)
von: Chernov, K.N., et al.
Veröffentlicht: (1999)
30 MeV injector for a synchrotron
von: Chernov, K., et al.
Veröffentlicht: (2001)
von: Chernov, K., et al.
Veröffentlicht: (2001)
Gas Combustion by Injector Burner with Annular Injector on Fire Stand
von: V. S. Pikashov, et al.
Veröffentlicht: (2011)
von: V. S. Pikashov, et al.
Veröffentlicht: (2011)
Increasing of industry mixers shangeble parts durability
von: Ju. Posypajko, et al.
Veröffentlicht: (2011)
von: Ju. Posypajko, et al.
Veröffentlicht: (2011)
Determination of spectrum hardness as a parameter of neutron field at WWR-M research reactor
von: P. M. Vorona, et al.
Veröffentlicht: (2012)
von: P. M. Vorona, et al.
Veröffentlicht: (2012)
Application of coercimetric method of testing in repair of a mixer in blast-furnace production
von: V. I. Sukhomlin, et al.
Veröffentlicht: (2017)
von: V. I. Sukhomlin, et al.
Veröffentlicht: (2017)
The GSI-UNILAC - a megawatt beam injector for FAIR
von: Barth, W., et al.
Veröffentlicht: (2006)
von: Barth, W., et al.
Veröffentlicht: (2006)
Nonlinear Analysis of Millimeter-Wave Schottky Diode Mixers
von: Piddyachiy, V. I., et al.
Veröffentlicht: (2013)
von: Piddyachiy, V. I., et al.
Veröffentlicht: (2013)
JUSTIFICATION OF RECOVERY CHAMBER HEIGHT AND AIR SUPPLY INFLUENCE ON WOOD GAS OUTPUT AND QUALITY
von: Yarosh, Y., et al.
Veröffentlicht: (2018)
von: Yarosh, Y., et al.
Veröffentlicht: (2018)
Injector of the linac LU-20
von: Beloglazov, V.I., et al.
Veröffentlicht: (1999)
von: Beloglazov, V.I., et al.
Veröffentlicht: (1999)
Research of the application efficiency of different constructions of flow cavitation mixers
von: A. A. Makarenko
Veröffentlicht: (2019)
von: A. A. Makarenko
Veröffentlicht: (2019)
Gunn Diode Millimetre-Wave Frequency Shift Mixer-Amplifier
von: Plaksin, S. V., et al.
Veröffentlicht: (2013)
von: Plaksin, S. V., et al.
Veröffentlicht: (2013)
THE POTENTIAL AND WAYS OF AGRICULTURAL BIOMASS HYDROGEN PRODUCTION ASSESSMENT
von: Kukharets, S., et al.
Veröffentlicht: (2020)
von: Kukharets, S., et al.
Veröffentlicht: (2020)
Subcriticality determination of nuclear reactor
von: V. I. Borisenko, et al.
Veröffentlicht: (2014)
von: V. I. Borisenko, et al.
Veröffentlicht: (2014)
The linearization parameters method in thermoelastic problem of a thin thermosensitive hollow disk
von: V. S. Popovych, et al.
Veröffentlicht: (2012)
von: V. S. Popovych, et al.
Veröffentlicht: (2012)
The substantiation of the electrical power supply channel based on the gas-generator installation
von: O. F. Sokolovskyi, et al.
Veröffentlicht: (2019)
von: O. F. Sokolovskyi, et al.
Veröffentlicht: (2019)
The second approximation in a small parameter to a solution of the problem of elastoplastic instability of a rotating disk
von: D. M. Lila
Veröffentlicht: (2018)
von: D. M. Lila
Veröffentlicht: (2018)
The third approximation in a small parameter to a solution of the problem of elastoplastic instability of a rotating disk
von: D. M. Lyla
Veröffentlicht: (2019)
von: D. M. Lyla
Veröffentlicht: (2019)
Tandem proton accelerator as injector for TRAPP
von: Kuznetsov, G.I., et al.
Veröffentlicht: (2001)
von: Kuznetsov, G.I., et al.
Veröffentlicht: (2001)
Analysis Error of Fmcw Measuring Systems Considering the Characteristics the Mixers Devices
von: E. A. Zajtsev
Veröffentlicht: (2013)
von: E. A. Zajtsev
Veröffentlicht: (2013)
Circumsubstellar disk SED in dependence on system parameters
von: O. Zakhozhay
Veröffentlicht: (2012)
von: O. Zakhozhay
Veröffentlicht: (2012)
Circumsubstellar disk SED in dependence on system parameters
von: Zakhozhay, O.
Veröffentlicht: (2012)
von: Zakhozhay, O.
Veröffentlicht: (2012)
Status of the linear accelerator-injector at the TNK facility
von: Anchugov, O.V., et al.
Veröffentlicht: (2008)
von: Anchugov, O.V., et al.
Veröffentlicht: (2008)
Status of the linear accelerator-injector at TNK facility
von: Chernov, K.N., et al.
Veröffentlicht: (2006)
von: Chernov, K.N., et al.
Veröffentlicht: (2006)
Waveguide channel for TNK linear accelerator–injector
von: Chernov, K.N., et al.
Veröffentlicht: (2004)
von: Chernov, K.N., et al.
Veröffentlicht: (2004)
H⁻ injector for Moscow meson factory linac
von: Belov, A.S., et al.
Veröffentlicht: (2006)
von: Belov, A.S., et al.
Veröffentlicht: (2006)
Investigation of beam extraction and formation in the ions injector
von: Belikov, А.G., et al.
Veröffentlicht: (2018)
von: Belikov, А.G., et al.
Veröffentlicht: (2018)
Pulsed injector of the working substance for magnetoplasma compressor
von: Staltsov, V.V.
Veröffentlicht: (2015)
von: Staltsov, V.V.
Veröffentlicht: (2015)
The electron injector for linac of the "NESTOR" storage ring
von: Aizatsky, M.I., et al.
Veröffentlicht: (2006)
von: Aizatsky, M.I., et al.
Veröffentlicht: (2006)
Influence estimation of asymmetry extra high voltage transmission line on determination of compensating reactor parameters
von: V. V. Kuchanskyi, et al.
Veröffentlicht: (2020)
von: V. V. Kuchanskyi, et al.
Veröffentlicht: (2020)
The second approximation in a small parameter to the solution of the problem of loss of the stability of a rotating disk in the refined formulation
von: D. M. Lila
Veröffentlicht: (2018)
von: D. M. Lila
Veröffentlicht: (2018)
Performance analysis of 30 MeV electron linac with a new injector system
von: Gokov, S.P., et al.
Veröffentlicht: (2009)
von: Gokov, S.P., et al.
Veröffentlicht: (2009)
System of vibration insulation of swirl mixers of sintering plants. Structural variations in the course of durable maintenance
von: G. N. Agaltsov
Veröffentlicht: (2013)
von: G. N. Agaltsov
Veröffentlicht: (2013)
Analyses of liquid extraction cleaning process of lacquer dye production waters in the exctractor with mixer
von: A. A. Gasanov, et al.
Veröffentlicht: (2016)
von: A. A. Gasanov, et al.
Veröffentlicht: (2016)
Covering a reduced spherical body by a disk
von: M. Musielak
Veröffentlicht: (2020)
von: M. Musielak
Veröffentlicht: (2020)
Covering a reduced spherical body by a disk
von: Musielak, M., et al.
Veröffentlicht: (2020)
von: Musielak, M., et al.
Veröffentlicht: (2020)
Ähnliche Einträge
-
THE DETERMINATION OF PARAMETERS OF A REACTOR-MIXER WITH A DISK INJECTOR
von: Yarosh, Y., et al.
Veröffentlicht: (2018) -
THE SUBSTANTIATION OF THE ELECTRICAL POWER SUPPLY CHANNEL BASED ON THE GAS-GENERATOR INSTALLATION
von: Sokolovskyi, О., et al.
Veröffentlicht: (2019) -
A subharmonic mixer for the 220-325 GHz frequency range
von: A. V. Zorenko, et al.
Veröffentlicht: (2013) -
A subharmonic mixer for the 220–325 GHz frequency range
von: Zorenko, A.V., et al.
Veröffentlicht: (2013) -
Buncher of electron linac-injector for a synchrotron
von: Chernov, K.N., et al.
Veröffentlicht: (1999)