Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	L. S. Molchanov, A. S. Lantukh, E. V. Sinegin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000992570
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity
von: A. S. Lantukh, et al.
Veröffentlicht: (2018)

Features of application of the lining of teeming ladles
von: V. G. Gerasimenko, et al.
Veröffentlicht: (2018)

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
von: P. A. Plokhikh, et al.
Veröffentlicht: (2018)

Efficiency improving for gas removal from ladle furnace
von: S. N. Timoshenko, et al.
Veröffentlicht: (2015)

The Researh of efficacy Removing non-metallies inclusions white inert gas is blowing on Metal in the industrial ladle with argon bubbles by Different Diameters
von: V. G. Efimova
Veröffentlicht: (2014)

Investigation of glaze formation on the working surface of steel ladle refractories lining
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Introduction of technology for application of MgO-CaO-flux as a slag modifier in steel-teeming ladles of the converter workshop at the &quot;Azovstal&quot; plc
von: A. A. Travinchev, et al.
Veröffentlicht: (2011)

Impact of metallurgical factors on the resistance of working ladle lining
von: Kovalenko, А.G., et al.
Veröffentlicht: (2016)

The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
von: S. G. Melnik
Veröffentlicht: (2011)

Gases and non-metallic inclusions in steel castings
von: V. V. Jasjukov, et al.
Veröffentlicht: (2017)

Impact of metallurgical factors on the resistance of working ladle lining (in English)
von: A. G. Kovalenko, et al.
Veröffentlicht: (2016)

Investigation of plasma-slag processes in special and ladle electrometallurgy of steel
von: Zhdanovsky, A.A., et al.
Veröffentlicht: (2008)

The Evaluation of the Content of Non-Metallic Inclusions in Steel by Stereological Reconstruction
von: A. N. Smirnov, et al.
Veröffentlicht: (2016)

Possibilities of Transformation of Non-Metallic Inclusions and Inclusion—Matrix Interphase Boundaries at High-Energy Treatments of Steels
von: S. I. Gubenko
Veröffentlicht: (2014)

Features of steel and slag mixing in a ladle during argon stirring
von: O. M. Smirnov, et al.
Veröffentlicht: (2009)

Structural chemical condition of the refiner slags under ladle steel treatment
von: B. F. Belov, et al.
Veröffentlicht: (2015)

Morphology of sulphidic non-metallic inclusions in restored of steel by electroslag method
von: E. N. Parakhnevich, et al.
Veröffentlicht: (2011)

Improvement of electric and technological modes of metal finishing in a ladle furnace
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
von: V. P. Piptjuk, et al.
Veröffentlicht: (2013)

Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
von: V. N. Kornievskij, et al.
Veröffentlicht: (2015)

Effect of residual aluminium in steel on contamination of large ingots with non-metallic inclusions
von: N. V. Efimov, et al.
Veröffentlicht: (2015)

Melting and crystallization of non-metallic inclusions and steel matrix under laser treatment
von: S. I. Gubenko
Veröffentlicht: (2010)

Non-classical logic in the context of non-classical rationality
von: L. M. Shenherii
Veröffentlicht: (2010)

The influence of corrosion-active non-metallic inclusions on the corrosion resistance of coiled tubing steels
von: N. Ben, et al.
Veröffentlicht: (2024)

The peculiarities of speed melting and solidification of non-metallic inclusions under laser treatment of steel
von: S. I. Hubenko, et al.
Veröffentlicht: (2017)

Removal of refractory inclusions from titanium in electron beam melting by the mechanism of precipitation
von: S. V. Akhonin, et al.
Veröffentlicht: (2010)

Removal of inclusions of titanium carbide TiC in electron beam melting of titanium
von: S. V. Akhonin, et al.
Veröffentlicht: (2012)

Behavior of non-metallic inclusions in structure of cast electroslag stainless steel of AISI of 316 type
von: A. A. Polishko, et al.
Veröffentlicht: (2014)

Determination of rational conditions for the removal organic substances from natural water based on mathematical modeling
von: E. A. Samsoni-Todorova, et al.
Veröffentlicht: (2015)

Technology of Wavelet-Filtra¬tion of the Gene Expression Profiles in Order to Remove the Background Noise
von: S. A. Babichev
Veröffentlicht: (2017)

Improving the efficiency of robotic fabrication of steel truss welded structures
von: V. M. Korzhyk, et al.
Veröffentlicht: (2021)

A RATIONAL EFFICIENCY DEFINITION FOR HEAT EXCHANGERS
von: González-Mora, Eduardo
Veröffentlicht: (2025)

Melting-pouring ladle with induction heating
von: V. O. Mushegjan
Veröffentlicht: (2010)

Melting-pouring ladle with induction heating
von: V. A. Shapovalov, et al.
Veröffentlicht: (2010)

Investigation of effect of calcium fluoride on power-technological characteristics of wheel steel treatment in ladle-furnace installation
von: G. A. Esaulov, et al.
Veröffentlicht: (2014)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
von: N. I. Zakharov, et al.
Veröffentlicht: (2014)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
von: I. N. Karp, et al.
Veröffentlicht: (2012)

Influence of the nature of distribution of non-metallic inclusions on the mechanical properties of weld metal of low-alloy steels
von: V. V. Holovko, et al.
Veröffentlicht: (2023)

Influence of non-metallic inclusions on formation of structure of weld metal of high-strength low-alloy steels
von: V. V. Golovko, et al.
Veröffentlicht: (2013)

Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
von: Velizade, Evren S.
Veröffentlicht: (2020)