Buchumschlag

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	S. I. Semykin, T. S. Golub, S. A. Dudchenko, V. V. Vakulchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000993227
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: Semykin, S.I., et al.
Veröffentlicht: (2020)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Comparative study on a physical model of specific features of top blowing through the tip with folded nozzles when blowing single-phase liquids
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Splashes of liquid phases at the top of the oxygen blowing
von: V. B. Okhotskij
Veröffentlicht: (2013)

Research of the influence of low potential on bihavior splashing of liquid when its top blowing by physical simulation
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
von: T. S. Golub, et al.
Veröffentlicht: (2024)

The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Studying the Possibility of Using Coherent Type Nozzles for Bof Blowing at the Gas Dynamic Simulation Stand
von: T. S. Golub, et al.
Veröffentlicht: (2023)

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2018)

Calculation of the motion of magnesium particles in the channel two -nozzles lance
von: V. I. Eliseev, et al.
Veröffentlicht: (2014)

The operating results of the experimental oxygen lance
von: K. G. Nizjaev, et al.
Veröffentlicht: (2014)

Study by physical simulation of gas jet temperature fields distribution at the nozzle exit
von: S. A. Dudchenko, et al.
Veröffentlicht: (2012)

Regular character of pig iron desulphurization by granulated magnesium injection through two-nozzle lances into the ladles of medium sizes
von: A. F. Shevchenko, et al.
Veröffentlicht: (2017)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Experience in developing the oxygen lance with tip central cooling
von: A. G. Chernjatevich
Veröffentlicht: (2017)

Determining the speed of particles in two-phase flow applied to magnesium-line of two-nozzle lance
von: A. P. Tolstopjat, et al.
Veröffentlicht: (2012)

The new technologies and lance improvement for the converter slag scull coating
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Assess on the possibilities to reduce dust emissions from the converter with the use of low-voltage potential
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Research of features of low-voltage potential influence on processes of metal refinement in the oxygen converter
von: S. I. Semykin, et al.
Veröffentlicht: (2011)

Development and implementation of resource-saving technologies converter melting using electricity low power
von: S. I. Semykin, et al.
Veröffentlicht: (2014)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Modelling of conditions for melt outflow through nozzles and attachments
von: G. O. Srebrjanskij, et al.
Veröffentlicht: (2015)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2019)

Computer Simulation of Fluid Flow Through a Venturi Nozzle of Different Configurations
von: Yu. Avdieieva, et al.
Veröffentlicht: (2022)

Research interfacial interaction in the flow of injected pulverized coal through a nozzle
von: N. V. Kosolap, et al.
Veröffentlicht: (2013)

Analytical study of the characteristics of streams flowing from nozzles of compound-type construction
von: S. I. Semykin, et al.
Veröffentlicht: (2022)

Comparison of various parameters of the lance design for injection granulated magnesium in hot metal
von: A. F. Shevchenko, et al.
Veröffentlicht: (2014)

Comparison of various parameters of the lance design for injection granulated magnesium in hot metal
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

The features of manganese liquid-phase reduction in the converter process with low-voltage electric potential
von: T. S. Golub, et al.
Veröffentlicht: (2017)