Buchumschlag

The System of Automatic Combustion Control in Gas-Burning Plants by Corrective Parameter

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
1. Verfasser:	K. S. Kryzhanovskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Energy Technologies and Resource Saving
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001014925
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Spherical standing burning wave with external automatic reactivity control
von: Leleko, Yu.Y., et al.
Veröffentlicht: (2019)

Definition of Principal Characteristics of Gas Mixtures Combustion. 3. Burning Velocity of Natural Gas with Humidified Oxidant
von: B. S. Soroka, et al.
Veröffentlicht: (2011)

Features of the Influence of Recirculation of Combustion Products on the Formation of Nitrogen Oxides in Boilers During Burning Natural Gas
von: Ja. Sigal, et al.
Veröffentlicht: (2018)

Definition of Principal Characteristics of Gas Mixtures Combustion. 2. Computations of the Burning Velocities of the Gas Mixtures by Means of Two-Parametric Generalization
von: B. S. Soroka, et al.
Veröffentlicht: (2010)

Analysis of conditions for burning of volatiles and air mixtures at biomass combustion
von: M. M. Zhovmir
Veröffentlicht: (2014)

Analysis of phase system of automatic frequency correction in laser rangefinder
von: I. A. Braginets, et al.
Veröffentlicht: (2015)

Preparation of Input Data for the Automatic Correction of Errors of the Current Measuring Channels of Electrical Power Objects Control Systems
von: Ye. M. Tankevych, et al.
Veröffentlicht: (2016)

The algorithm for selection of interval of parameters recalculation of control and management objects in automatic control systems of process engineering
von: A. N. Tynynyka
Veröffentlicht: (2016)

Using of corundum forms with burns models to produce parts of the gas-turbine plants
von: V. V. Lashneva, et al.
Veröffentlicht: (2015)

Problems and Prospects for the Intellectualization of Automatic Control Systems
von: L. S. Zhytetskyi
Veröffentlicht: (2022)

Introduction of automatic system for control and diagnostics of technical condition of gas cleaning fans for open-hearth furnaces
von: A. V. Bahlai, et al.
Veröffentlicht: (2020)

Modern State-of-the-Art And Directions For Improvement The Gas Burning in Domestic Gas Cookers. Part 1. Scientific and Technological Principles of Efficient Fuel use and Environmentally Friendly Gas Combustion in Stove Plates
von: B. S. Soroka, et al.
Veröffentlicht: (2017)

Gas Burners for Combustion of Biogas in Boilers
von: Ja. Sigal, et al.
Veröffentlicht: (2014)

The Control System of Automatic Recognition of the Actual User and Computer Program
von: E. A. Grishko, et al.
Veröffentlicht: (2013)

The Method and Burning Device for Phasic Combustion of Gaseous and Liquid Fuels with Fuel and Air Prolonged Mixing
von: V. S. Pikashov, et al.
Veröffentlicht: (2012)

Fundamentals of automatic frequency and power control system based on the controllable loads
von: Kulyk М.M., et al.
Veröffentlicht: (2010)

Automatic frequency control system of a pulsed magnetron
von: I. P. Bezgina, et al.
Veröffentlicht: (2019)

Mathematical modeling of processes of automatic frequency and power control in IPS with solar power plants
von: I. V. Dremin
Veröffentlicht: (2016)

Mathematical modeling of processes of automatic frequency and power control in IPS with solar power plants
von: Dryomin I.V.
Veröffentlicht: (2016)

On Correction of Parameters of the Non-damped Mechanical Systems
von: V. B. Larin
Veröffentlicht: (2017)

Functional features of dispatching control centre for automatic control system of agricultural enterprise
von: Lytvynov, V.V., et al.
Veröffentlicht: (2014)

Functional features of dispatching control centre for automatic control system of agricultural enterprise
von: V. V. Lytvynov, et al.
Veröffentlicht: (2014)

Improvement of automatic control systems and safety management in process control domain of production
von: A. V. Karasevich, et al.
Veröffentlicht: (2015)

Functional features of dispatching control centre for automatic control system of agricultural enterprise
von: Lytvynov, V.V., et al.
Veröffentlicht: (2014)

Intellectualization of Modern Systems of Automatic Control of Unmanned Aerial Vehicles
von: V. I. Hrytsenko, et al.
Veröffentlicht: (2018)

Calculation of Contact Seals as Automatic Control Systems with Inverse Feedback
von: S. S. Shevchenko, et al.
Veröffentlicht: (2020)

Experimental Study of Thermochemical Conversion Process for Plant Biomass into Combustible Gas and Biocarbon on Installation of Screw Type
von: E. V. Skljarenko, et al.
Veröffentlicht: (2016)

Critical sizes of standing nuclear burning waves in systems with external control
von: Leleko, Yu.Ya., et al.
Veröffentlicht: (2020)

The influence of burn-on on castings properties and measures of control it
von: V. V. Jasjukov, et al.
Veröffentlicht: (2016)

Techno-Economic Aspects of Using Consumers-Controllers in Automatic Frequency and Power Control Systems
von: Kulyk М.M.
Veröffentlicht: (2015)

The Features of Tubular Type Burner System for Combustion Chamber Gas Transporting Unit
von: G. B. Varlamov, et al.
Veröffentlicht: (2012)

Analysis of the Process of Condensation of Gas Atmospheres and Combustion Protucts
von: B. S. Soroka, et al.
Veröffentlicht: (2017)

The Method and Program for Natural Gas Combustion Temperature Computation
von: S. P. Krushnevich
Veröffentlicht: (2010)

System of automatic frequency control of heterodyne of radar receiver with magnetron transmitter
von: I. M. Mytsenko, et al.
Veröffentlicht: (2018)

Investigation of automatic frequency and power control system modes with regulatory generators
von: Dryomin I.V.
Veröffentlicht: (2011)

Determination of the region of stability in the plane of parameters and quality indicators of linear continuous automatic control systems using the D-partition method
von: L. T. Movchan
Veröffentlicht: (2023)

The Application of Mathematical Modeling in the System of Automatic Control of Process of Hydraulic Action on Crack-Porous Massive in Conditions of Indefinite Parameters of Surroundings
von: V. N. Pavlysh, et al.
Veröffentlicht: (2013)

Experience of Imported Coal Burning in the Boilers of Thermal Power Plants and Cogeneration Plants
von: N. V. Chernjavskij, et al.
Veröffentlicht: (2015)

Burning parameters of litter from Ukrainian Polissya pine forests
von: V. P. Voron, et al.
Veröffentlicht: (2016)

Structural changes in the gas flame upon the pulsating combustion mode onset
von: Yu. Trofimenko, et al.
Veröffentlicht: (2014)