Evolution of torsion and bending moments in a frame support profile due to its plastic deformation

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	V. V. Nazymko, O. B. Kusen, L. M. Zakharova
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Geo-Technical Mechanics
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001097996
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Implementing FLAC3D model for simulating deformation mechanism of steel frame support set by actual profile
von: Nazymko, V., et al.
Veröffentlicht: (2016)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: Kurek, M., et al.
Veröffentlicht: (2011)

Development of the method of continuous monitoring of frame strip resistance and its pliability
von: L. M. Zakharova, et al.
Veröffentlicht: (2017)

Perfection of construction of frame-anchor fastening of joint resistance
von: O. B. Kusen, et al.
Veröffentlicht: (2018)

Deformation of the plasma concentration profile due to the modulated electron beam
von: Anisimov, I.O., et al.
Veröffentlicht: (2002)

Effect of dislocations on the structural order parameter in a crystal under severe plastic deformation by torsion
von: Ju. D. Zavorotnev, et al.
Veröffentlicht: (2016)

Deformation of the plasma concentration profile due field of the modulated electron beam: numerical simulation
von: Anisimov, I.O., et al.
Veröffentlicht: (2003)

Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)

On numerical realization of torsion and bending problems for prismatic bars with arbitrary cross-sections
von: Ju. Fialko, et al.
Veröffentlicht: (2012)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: Kurek, М., et al.
Veröffentlicht: (2011)

On the low-temperature anomalies in the thermal conductivity of plastically deformed crystals due to phonon–kink scattering
von: van Ostaay, J.A.M., et al.
Veröffentlicht: (2012)

Schumann resonances for conductivity profile of atmosphere with single bending
von: Ju. P. Galjuk, et al.
Veröffentlicht: (2015)

Moments of Markov Random Evolutions
von: Samoilenko, I. V., et al.
Veröffentlicht: (2001)

Microstructure evolution of the carbon steels during surface severe plastic deformation
von: M. O. Vasylyev, et al.
Veröffentlicht: (2021)

Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)

To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
von: V. N. Pelykh
Veröffentlicht: (2019)

Bending of partially supported circular plate
von: V. I. Ostryk, et al.
Veröffentlicht: (2014)

Geometric characteristics of quantum evolution: curvature and torsion
von: Laba, H.P., et al.
Veröffentlicht: (2017)

Dynamic bending of plastic polymetallic plates with piecewise-smooth elliptical contours
von: Ju. V. Nemirovskij
Veröffentlicht: (2019)

Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
von: Rozumek, D., et al.
Veröffentlicht: (2010)

Evolution of moments of isotropic Brownian stochastic flows
von: V. V. Fomichov
Veröffentlicht: (2015)

Localization of deformation in the process of large plastic deformations
von: M. A. Latypova, et al.
Veröffentlicht: (2022)

Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
von: D. Rozumek, et al.
Veröffentlicht: (2010)

Substructure and orientation heterogeneity of polycrystalline aluminum and its changes during plastic deformation
von: Badiyan, E.E., et al.
Veröffentlicht: (2016)

Combined bending and tension of the plate with a rectilinear through-crack in the presence of plastic zones in its tips with regard for the contact of its edges and linear strengthening of the material
von: S. O. Alfavitska, et al.
Veröffentlicht: (2017)

Structural mechanisms of plastic deformation of ceramics
von: G. S. Olejnik
Veröffentlicht: (2014)

Macroscopic physics of plastic deformation of metals
von: L. B. Zuev
Veröffentlicht: (2015)

Moments and Legendre-Fourier Series for Measures Supported on Curves
von: Lasserre, J.B.
Veröffentlicht: (2015)

Macrolocalization of plastic deformation and staging of plastic flow in polycrystalline metals and alloys
von: V. I. Danilov, et al.
Veröffentlicht: (2008)

Nanocrystalline structure formation under severe plastic deformation and its influence on mechanical properties
von: Podrezov, Yu.M.
Veröffentlicht: (2005)

Effect of prior plastic deformation of steel 25 on its diffusion saturation with boron and carbon
von: Yu. Filonenko, et al.
Veröffentlicht: (2015)

Evolution of Vacancy Clusters under Thermal Annealing of Metals Undergone Severe Plastic Deformation under Cryogenic Conditions
von: R. V. Shapovalov, et al.
Veröffentlicht: (2013)

Modeling of Crack Resistance of Ion-Strengthened Silicate Glass under Bending Deformations
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2022)

Black hole torsion effect and its relation to information
von: I. Gkigkitzis, et al.
Veröffentlicht: (2019)

Black hole torsion effect and its relation to information
von: I. Gkigkitzis, et al.
Veröffentlicht: (2019)

Biaxial bending isotropic plate with a through-thickness rectilinear crack with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

Bending isotropic plate with two equal coaxial through-thickness cracks with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2016)

Explosive evolution of galaxies at high redshifts due to minor mergers
von: Kats, A.V., et al.
Veröffentlicht: (2013)