Cover Image

The impact of the thickness of transition intermetallic CuAl2 area on the hardness of Al-Cu system material

Saved in:

Bibliographic Details
Date:	2018
Main Authors:	O. N. Sizonenko, A. D. Zajchenko, N. S. Pristash
Format:	Article
Language:	English
Published:	2018
Series:	Electrical Contacts and Electrodes. Series : Composite, Layered and Gradient Materials and Coatings
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001168111
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Thermoactivation analysis of temperature dependence of hardness in quasicrystals of the system Al—Cu—Fe
by: Yu. V. Milman, et al.
Published: (2022)

The impact of material and thickness of the separation layer on the structure condensates Cu-Mo
by: V. H. Hrechaniuk, et al.
Published: (2016)

Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020)

Effect of Y on structure and properties of cast intermetallic Ti-36Al. 1. Structure and hardness of cast Ti-36Al-Y alloy
by: I. D. Horna, et al.
Published: (2010)

Pulse Condenser Welding of Functional Cu—Al Alloys and Its Effect on the Structure of the Joint Area
by: D. M. Kaleko, et al.
Published: (2015)

Конструкційні алюмінієві сплави систем Al−Cu−Mg і Al−Zn−Mg−Cu в літакобудуванні. Огляд
by: Пригунова, А. Г., et al.
Published: (2023)

Quasicrystal structure in Al – Cu – Fe PVD coatings
by: N. V. Zaitseva, et al.
Published: (2013)

The influence of hydrogen peroxide on composition and porosity of oxide ceramic coatings on Al–Si–Cu ta Al–Cu–Mg alloys
by: V. M. Posuvailo, et al.
Published: (2021)

Microstructure Investigation of the Spark Plasma Sintered Cu—Al—Ni Shape Memory Material
by: Monastyrsky, G.E., et al.
Published: (2014)

Microstructure Investigation of the Spark Plasma Sintered Cu—Al—Ni Shape Memory Material
by: G. E. Monastyrsky, et al.
Published: (2014)

Manufacturing technologies of Cu‒Al bimetallic composites (Review)
by: I. V. Ziakhor, et al.
Published: (2023)

Porous Al and Cu structures as infrared signal enhancers
by: Dovbeshko, G.I., et al.
Published: (2010)

Микролегирование сплава AlCu6,8 титаном
by: Ласковец, В.В., et al.
Published: (2012)

Features of Hysteresis of Martensitic Transformations in Cu—Al—Mn Alloys
by: I. R. Bublej, et al.
Published: (2014)

Physicomechanical properties of Cu–Al2O3 galvanic compositions.
by: M. D. Sakhnenko, et al.
Published: (2014)

Influence titanium on the crystallization process of alloy al-6,2 cu
by: V. V. Laskovets, et al.
Published: (2014)

Fibre laser welding of aluminium alloys OF 7xxx series (Al–Zn–Mg–Cu) by non-through thickness welds
by: V. M. Korzhyk, et al.
Published: (2022)

Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
by: A. I. Ustinov, et al.
Published: (2019)

Corrosion properties of oxide ceramic coatings based on Al–Cu–Mg and Al–Mg alloys
by: L. M. Bilyi, et al.
Published: (2021)

Corrosion behaviour of quasicrystal Al – Cu – Fe and Al – Ni – Fe alloys in acidic solutions
by: O. V. Sukhova, et al.
Published: (2018)

Structure of intermetallic titanium alloy of Ti–Al–Nb–Cr system
by: V. A. Kostin, et al.
Published: (2019)

Corrosion strength of plasma coatings based on composite powders with FeAl intermetallic
by: N. V. Vihilianska, et al.
Published: (2022)

Detonation coatings produced by spraying of alloyed powders based on Fe–Al intermetallics
by: N. V. Vigilianska, et al.
Published: (2024)

Investigation of stress-strain state of welded joints of intermetallics of the system TiAl
by: L. M. Lobanov, et al.
Published: (2019)

Электросопротивление многослойных композиций Al–Cu и графит–фторопласт
by: Беженар, А.А., et al.
Published: (2013)

Фізико-механічні властивості гальванічних композицій Cu–Al₂O₃
by: Сахненко, М.Д., et al.
Published: (2014)

Влияние температуры на прочность контактного соединения Al–Cu
by: Устинович, Р.
Published: (2008)

Термическая стабильность наноструктурированных вакуумных конденсатов Al₆₃Cu₂₆Fe₁₁
by: Устинов, А.И., et al.
Published: (2010)

Рентгенодифракцiйне дослідження структури розплавів Al—Cu
by: Роїк, О.С., et al.
Published: (2008)

Electrical Resistance of the Al–Cu and Graphite–Fluoro-plastic Multilayer Compositions
by: A. A. Bezhenar, et al.
Published: (2013)

Влияние титана на процесс кристаллизации сплава al -6,2 Cu
by: Ласковец, В.В., et al.
Published: (2014)

Розробка та дослідження мікроструктури легких високоентропійних сплавів систем Al–Si–Cu–Ni–Zn та Al–Si–Cu–Ni–Mg–Zn
by: Ліхацький, І.Ф.
Published: (2025)

Pressure welding of micro-dispersed composite material AMg5 + 27 % Al2O3 with application of rapidly solidified interlayer of eutectic composition Al + 33 % Cu
by: Ju. V. Falchenko, et al.
Published: (2010)

Structure and properties of oxyde coatings on substrates of Al-Cu and Al-Mg alloys manufactured using electrolyte-plasma oxidation
by: A. D. Pogrebnjak, et al.
Published: (2008)

Structure and mechanical properties of high-entropy AlCuNiFeCr and AlCuNiFeCrTi coatings obtained by electron beam surfacing
by: O. I. Yurkova, et al.
Published: (2017)

Detonation coatings of intermetallic powders of Fe–Al system produced using mechanical alloying
by: Ju. S. Borisov, et al.
Published: (2017)

Zonal refining of cast intermetallic alloy on TiAl base alloyed with niobium and chromium
by: G. M. Grigorenko, et al.
Published: (2011)

The features of structure formation at synthesis of high entropy alloys of Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu and Ti – Cr – Fe – Ni – Cu systems by means of powder metallurgy
by: H. A. Bahliuk, et al.
Published: (2015)

N - Ti - Al coatings on steels and hard alloys
by: V. H. Khyzhniak, et al.
Published: (2016)

Корозійна поведінка квазікристалічних сплавів Al – Cu – Fe та Al – Ni – Fe у розчинах кислот
by: Sukhova, O. V., et al.
Published: (2018)