Cover Image

High-strength non-autoclave and microporous autoclaved aerated concrete

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	T. S. Dashkova, V. V. Glukhovskij, І. V. Glukhovskij
Format:	Article
Language:	English
Published:	2017
Series:	Ceramics: Science and Life
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000716491
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Technological properties of porous concrete autoclave and non-autoclave hardening
by: O. M. Nedbailo, et al.
Published: (2020)

Zirconium Concentrate Autoclave Decomposition at the Presence of Calcium Fluoride
by: T. V. Pavlenko, et al.
Published: (2010)

Communicating tunnel autoclave for production of castings patterns of foam plastics
by: Kh. Berdyev, et al.
Published: (2009)

Phase Transitions in Autoclaved Placental Extracts and Cell Suspensions at Temperatures below 0°C
by: E. N. Bobrova, et al.
Published: (2012)

Influence of autoclaved placenta extracts on phase behavior of cell suspensions below 0°C
by: A. V. Zinchenko, et al.
Published: (2013)

Facile and scalable synthesis of Ti₅Si₃ nanoparticles via solid-state route in an autoclave
by: Mao, W., et al.
Published: (2017)

Facile and scalable synthesis of Ti5Si3 nanoparticles via solid-state route in an autoclave
by: W. Mao, et al.
Published: (2017)

Liquid Radioactive Solidification Technologies
by: V. A. Sviderskij, et al.
Published: (2019)

Application of thermal imaging diagnostics to monitor the quality of soldered joints of electric motor stator windings
by: Ju. Glukhovskij
Published: (2014)

Prediction of fiber-reinforced concrete strength under compression
by: V. P. Sylovaniuk, et al.
Published: (2016)

High Performance Calculations for Simulation of Filtration Mass Transfer in Microporous Particles Feedback Considered
by: M. R. Petryk, et al.
Published: (2020)

Calculation model of fibre concrete for prediction of strength under tension
by: V. P. Sylovaniuk, et al.
Published: (2015)

High Performance Calculations for Simulation of Filtration Mass Transfer in Microporous Particles Feedback Considered
by: Петрик, Михайло, et al.
Published: (2020)

NMR studies of methane and hydrogen in microporous materials
by: Y. Ji, et al.
Published: (2016)

Adsorption equilibrium and hysteresis in open slit-like micropores
by: V. V. Kutarov, et al.
Published: (2013)

On protective properties of aeration zone for Vector facility site
by: Yu. O. Olkhovyk
Published: (2015)

Determination and calculation of geometrical parameters of defects of the object of control with application of laser-TV flaw detection
by: Ju. Glukhovskij, et al.
Published: (2013)

Modelling of cycling of lithium battery with microporous carbon electrode
by: Portnyagin, D.
Published: (2008)

Methods of strength and life time evaluation of fiber reinforced concretes (A review)
by: Ye. Andreikiv, et al.
Published: (2018)

Application of heat monitoring in welding polyethylene pipes
by: Ju. Glukhovskij, et al.
Published: (2010)

Application of aeration-oxidative jet-looped setup for biological wastewater treatment
by: O. M. Obodovych, et al.
Published: (2018)

Alkali activated coals. Microporous structure and capability to adsorb phenol compounds
by: Yu. V. Tamarkina, et al.
Published: (2022)

Strength of the steel fiber concrete elements with a circular cut under single loading
by: Ye. M. Babych, et al.
Published: (2016)

Comprehensive Approach to Evaluating the Macro- and Micropore Structures of Textile Materials
by: A. M. Slizkov, et al.
Published: (2024)

Estimations of high-temperature diffusion in Chernobyl’s concrete construction
by: Dikiy, N.P., et al.
Published: (2005)

Application of scaling theory to description of adsorption hysteresis in open slit-like micropores
by: V. V. Kutarov, et al.
Published: (2012)

Experimental study of the salt solution erosing influence on strength of concrete with recycled coarse aggregate
by: Liu Faming, et al.
Published: (2017)

Investigation of dynamic stress state of microporous media in the framework of the Cosserat pseudo-continuum
by: V. I. Shvabiuk, et al.
Published: (2018)

Gas and Hydrate Natural Cold Accumulators in Active Aeration Systems for Fruit and Vegetables Depositories
by: V. V. Klimenko, et al.
Published: (2011)

Research of interdependence between methods of concrete rib-side track building and the track strength and deformation parameters
by: S. A. Kurnosov, et al.
Published: (2015)

Poral aqucus solutions of the aeration zone in southern areas of the Steppe zone of Ukraine
by: A. A. Sukhorebryj
Published: (2013)

PORAL AQUCUS SOLUTIONS OF THE AERATION ZONE IN SOUTHERN AREAS OF THE STEPPE ZONE OF UKRAINE
by: SUKHOREBRIY, A.A.
Published: (2013)

Formation of long-flame coal microporous structure under alkali activation. Influence of temperature
by: V. O. Kucherenko, et al.
Published: (2024)

Microporous nanocrystalline V–N–He thin films. Fabrication method, structure, properties
by: V. Bryk, et al.
Published: (2011)

Concrete algorythmics
by: O. I. Provotar, et al.
Published: (2016)

Improvement of serviceability of damaged concrete and iron-concrete constructions by sealing-strengthening injections
by: V. I. Marukha
Published: (2013)

Influence of non-metallic inclusions on formation of structure of weld metal of high-strength low-alloy steels
by: V. V. Golovko, et al.
Published: (2013)

Improving technology of biological wastewater treatment by new heat and mass transfer, aeration and oxidation equipment of rotor type
by: A. A. Dolinskyi, et al.
Published: (2017)

Experimental and Computer research of reinforced Concrete Columns under high temperature Effects
by: M. H. Surianinov, et al.
Published: (2020)

Intensification of the processes of aeration and oxidation in a drinking water treatment technology by new heat and mass transfer equipment
by: A. A. Dolinskyi, et al.
Published: (2017)