Buchumschlag

Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	M. V. Gubinskij, S. N. Timoshenko, A. A. Shrajber, I. V. Antonets
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	The problems of general energy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000716502
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: Gubinskii M.V., et al.
Veröffentlicht: (2017)

Energy-efficient solutions for the modernization of DC steelmaking arc furnaces of the foundry class
von: S. N. Timoshenko, et al.
Veröffentlicht: (2017)

Ways of increasing the energy efficiency of electric arc furnaces
von: S. N. Timoshenko, et al.
Veröffentlicht: (2019)

Use of the heat of the exhaust gases of industrial furnaces by the method of thermochemical recuperation
von: Yatsenko V.P., et al.
Veröffentlicht: (2014)

Efficiency improving for gas removal from ladle furnace
von: S. N. Timoshenko, et al.
Veröffentlicht: (2015)

Features of Calculation of Electromagnetic Parameters of the Induction Crucible Furnace during Steelmaking
von: K. O. Kostyk, et al.
Veröffentlicht: (2021)

Method of calculation of exhaust gases emissions of biogas engine
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)

Method of calculation of exhaust gases emissions of biogas engine
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)

Method of calculation of exhaust gases emissions of biogas engine
von: F. I. Abramchuk, et al.
Veröffentlicht: (2013)

The Exhaust Gases of Internal-Combustion Engines Neutralization Systems Evolution
von: S. V. Bojchenko, et al.
Veröffentlicht: (2010)

Small electrical steelmaking plants in structure of Ukrainian steelmaking complex
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Selection and Transformation of Energy of Exhaust Gases of Rotary Kilns for Industrial Heating
von: V. D. Petrash, et al.
Veröffentlicht: (2013)

Determination of the optimal conditions of implementing the process of thermochemical recuperation for using the heat of exhaust gases of a gas-turbine plant
von: O. A. Shraiber
Veröffentlicht: (2015)

Determination of the optimal conditions of implementing the process of thermochemical recuperation for using the heat of exhaust gases of a gas-turbine plant
von: Шрайбер О.А.
Veröffentlicht: (2015)

Energy-efficient solutions for modernization of small-capacity electric arc furnaces of a foundry class
von: S. N. Timoshenko, et al.
Veröffentlicht: (2018)

Natural Gas Saving by Replacement the Last for Process Gases while Heating Middle and High Temperature Furnaces. Part 1. Influence of Low-Calorie Gases Characteristics on Fuel Flow Rate in Furnaces
von: B. S. Soroka, et al.
Veröffentlicht: (2016)

Optimization of compressor workshops operating modes as mean of the main gas piplines power efficiency enhancement
von: Leshchenko I.Ch.
Veröffentlicht: (2007)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2019)

The influence of circulating furnace gases on uniformity of temperature field in the heating furnaces
von: A. O. Eremin
Veröffentlicht: (2014)

Pig-iron and slag temperature on exhaustion at blast furnace operated with different fuel
von: I. V. Mishyn, et al.
Veröffentlicht: (2012)

DEVELOPMENT OF METHODS AND MEANS OF COMPUTER SIMULATION FOR STUDYING ARC FURNACE ELECTRIC MODES
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018)

Catalytic Activity of Palladium Containing Coating in Neutralization Reactions of Exhaust Gases of Internal Combustion Engine
von: T. A. Nenastina, et al.
Veröffentlicht: (2014)

Prediction of steelmaking slag surface tension
von: E. V. Prikhodko, et al.
Veröffentlicht: (2012)

The project solutions of steelmaking factory reconstruction
von: A. V. Kalinovich
Veröffentlicht: (2011)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)

The analysis of protection systems efficiency of gas-exhaust ducts in boiler installations by using heat recovery technologies
von: N. M. Fialko, et al.
Veröffentlicht: (2016)

Features of the Use of Refinery Gases for Heating Furnaces and Boilers
von: V. S. Pikashov, et al.
Veröffentlicht: (2017)

Salculation of the Parameters of Exhaust Gases Coal-Fired Thermal Power Plants Based on Solid Fuel Characteristics
von: I. A. Volchyn, et al.
Veröffentlicht: (2016)

Conversion iron oxide in the different composition of reducing gases media
von: V. S. Zenkov, et al.
Veröffentlicht: (2010)

Dry purification system of blast furnace gases as an element of energy efficiency of cast iron production technology
von: S. V. Semirjagin, et al.
Veröffentlicht: (2019)

Modeling of adsorption and desorption of hydrocarbons in nanoporous catalisators of neutralizing systems of exhaust gases using nonlinear Langmuir isoterm
von: M. R. Petrik, et al.
Veröffentlicht: (2018)

Restoration of end part of copper gas-oxygen chambers of arc steel-melting furnaces
von: V. M. Iljushenko, et al.
Veröffentlicht: (2019)

Hearth electrodes of DC arc furnaces
von: V. A. Zajtsev, et al.
Veröffentlicht: (2009)

The Investigation of Autothermal Natural Gas Conversion with Air
von: Ju. V. Marchuk
Veröffentlicht: (2010)

Modeling of heat and mass transfer, adsorption and desorption of hydro-carbons in nanoprous zeolite-catalisators of neutralizing systems of exhaust gases
von: M. R. Petrik, et al.
Veröffentlicht: (2018)

Enhancement of efficiency for further development of a depleted gas condensate fields
von: O. R. Kondrat
Veröffentlicht: (2015)

Features of risk management in the early stages of the development of innovative projects to enhance the energy efficiency of technical devices for conversing energy
von: V. I. Statsenko, et al.
Veröffentlicht: (2019)

Furnace aggregate waste gases path aerodynamic characteristic and its use for furnace heat work improvement ways analysis
von: A. B. Birjukov
Veröffentlicht: (2013)

Influence of the Nonuniformity Distribution of Irrigation Density in a Hollow Scrubber on the Efficiency of Cleaning Flue Gases From Solid Particles
von: Shraiber O.A., et al.
Veröffentlicht: (2015)

Carbon Nanomaterial Production from Products of Methane-Air Conversion with Spent Gases Recirculation
von: V. G. Kotov, et al.
Veröffentlicht: (2018)