Cover Image

Structure and properties of reinforcing rolled coils by v-alloyed dual-and multi-phase C-Mn-Si-steel

Saved in:

Bibliographic Details
Date:	2022
Main Authors:	V. L. Pliuta, G. V. Levchenko, S. O. Vorobey, A. M. Nesterenko
Format:	Article
Language:	English
Published:	2022
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001393473
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Influence on bainitic hardening properties and structural states of reinforcing rolled steel 30GS
by: G. V. Levchenko, et al.
Published: (2014)

Effect of multi-pass friction stir processing on the microstructure and mechanical properties of dual phase steel
by: T. Kucukomeroglu, et al.
Published: (2018)

Reinforcing phases, structure and properties of modified welds of low-alloyed steels
by: V. V. Golovko, et al.
Published: (2016)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
by: Švec, P., et al.
Published: (2017)

An Alternative Approach to the Fracture Toughness of Dual Phase Steels
by: S. Ulu, et al.
Published: (2013)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
by: Hobiny, A.D., et al.
Published: (2018)

The effect of asymmetry of the coil block on self-assembly in ABC coil-rod-coil triblock copolymers
by: Han, X.-G., et al.
Published: (2017)

FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
by: Kaščák, L., et al.
Published: (2016)

Rheological properties of steel at roll casting-rolling
by: O. V. Nohovitsyn, et al.
Published: (2014)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
by: V. H. Razdobrieiev, et al.
Published: (2022)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
by: Schindler, I., et al.
Published: (2008)

Dynamics and diagnostics of clearances in multi-stand rolling
by: A. V. Bahlai, et al.
Published: (2020)

The Role of Manganese and Liquid-Phase Electric Treatment on the Formation of Iron-Containing Phases in Predeutectic Alloys of the Al-Si-−Fe-Mn System
by: A. H. Pryhunova
Published: (2020)

Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
by: Tang, C., et al.
Published: (2015)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

Influence of modification on the characteristics of reinforcing steels intended for reinforced concrete structures
by: S. O. Polishko
Published: (2023)

The influence of higher Si and Mn content on operation characteristics of wheel steel
by: V. V. Kulyk, et al.
Published: (2019)

Linear stochastic differential equations in the dual of a multi-Hilbertian space
by: Gawarecki, L., et al.
Published: (2008)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
by: T. N. Golubenko, et al.
Published: (2012)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
by: S. V. Bobyr, et al.
Published: (2020)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
by: M. I. Pashechko
Published: (2010)

The influence of corrosion-active non-metallic inclusions on the corrosion resistance of coiled tubing steels
by: N. Ben, et al.
Published: (2024)

Phase Hardening in Ferromagnetic Shape-Memory Ni—Mn—In Alloy
by: V. V. Kokorin, et al.
Published: (2013)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
by: A. S. Osipov, et al.
Published: (2016)

Influence of quenching/partitioning temperature on morphology of 37MnSi5 steel
by: H. R. Ghazvinloo, et al.
Published: (2016)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
by: S. E. Kondratiuk, et al.
Published: (2016)

Formability of Tailor-Welded Blanks from Dual-Phase and Bake-Hardened Steels with a Planar Anisotropy Influence
by: Schrek, A., et al.
Published: (2017)

Study of deformation-thermal treatment effect on structure formation for transitional class alloys in the system Fe-C-Mn-Cr
by: G. V. Levchenko, et al.
Published: (2013)

Microprocessor selective protection from the phase to the earth fault in electric networks with Petersen coil in neutral
by: V. F. Sivokobylenko, et al.
Published: (2019)

Structural Characterization and Precipitation in AlMg5Si2Mn Alloy
by: V. V. Boyko, et al.
Published: (2014)

Structure and mechanical properties of al-mg-si-mn alloys with addition of lithium
by: E. L. Prach, et al.
Published: (2014)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
by: Kuznetsov, B. I., et al.
Published: (2020)

Salculation of Temperature in strips casting-rolling steel
by: A. V. Nogovitsyn, et al.
Published: (2014)

Modeling the phase-structural state and controlling the properties of metal of Fe-Cr-Mn alloying system, deposited on low-carbon structural steel
by: Ja. A. Chejljakh, et al.
Published: (2018)

Mechanical Properties of A356 Matrix Composites Reinforced with Nano-SiC Particles
by: A. Mazahery, et al.
Published: (2012)

Mechanical Properties of A356 Matrix Composites Reinforced with Nano-SiC Particles
by: Mazahery, A., et al.
Published: (2012)

Phase Space of Rolling Solutions of the Tippe Top
by: Glad, S.T., et al.
Published: (2007)