Cover Image

Investigation of hydro-abrasive wear of epoxy composites containing a two-component filler

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	A. V. Buketov, O. O. Sapronov, M. V. Brailo, D. O. Zinchenko, V. D. Nihalatii
Format:	Article
Language:	English
Published:	2017
Series:	Materials Science (Physicochemical mechanics of materials)
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000778248
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Investigation of wear-resistant protective coatings under conditions of hydro-abrasive wear
by: B. V. Stefaniv
Published: (2016)

Investigation of the influence of microdispersed fillers on physicomechanical and thermal properties of epoxy composites
by: A. V. Buketov, et al.
Published: (2015)

The influence of filler dispersion on adhesion strength and residual pressure in epoxy composites
by: A. V. Buketov, et al.
Published: (2012)

The influence of ultrasonic treatment on the physical, mechanical and thermal properties of epoxy nanocomposites
by: A. V. Buketov, et al.
Published: (2013)

Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
by: A. P. Zhudra
Published: (2014)

Tribological properties of epoxi composite materials filled with dispersed particles and thermoplastic materials
by: A. V. Buketov, et al.
Published: (2016)

Electrophysical properties of composites based on epoxy resin and carbon fillers
by: O. G. Sirenko, et al.
Published: (2021)

Improving accuracy of profile hydro-abrasive cutting of plates of hardmetals and superhard materials
by: A. F. Salenko, et al.
Published: (2014)

Development of epoxy-polyester matrix with improved adhesion and physicomechanical properties using an isocyanate modificator
by: A. V. Buketov, et al.
Published: (2019)

Influence of abrasive mass fractional composition on deposited metal wear resistance
by: V. V. Peremitko, et al.
Published: (2015)

Effect of graphene filler oxidation on the thermal destruction of epoxy-graphene composites
by: N. V. Sigareva, et al.
Published: (2021)

Abrasive-containing glass materials as binders for tools
by: S. A. Kukharenko, et al.
Published: (2017)

Abrasive fatigue wear rubber lining in the context of fractal analysis
by: A. S. Kobets, et al.
Published: (2019)

Modeling of wear-resistance of epoxy composites by mechanical properties variation
by: D. P. Stukhliak, et al.
Published: (2018)

Carboxy containing peroxyoligomer with epoxy groups
by: M. M. Bratychak, et al.
Published: (2012)

Modeling of the abrasive wear of convective heat transfer surfaces of a boiler
by: Shraiber O.A., et al.
Published: (2008)

The theory of the wave are abrasive fatigue wear are elastic hereditary environments
by: V. I. Dyrda
Published: (2013)

The influence of porosity in an epoxy matrix–polyvinyl alcohol–disperse filler system on impact toughness
by: P. D. Stukhliak, et al.
Published: (2010)

Structure and wear resistance at abrasive wear of deposited material, hardened with carbides of different types
by: I. A. Rjabtsev, et al.
Published: (2015)

Peculiarities of fracture of high-chromium cast irons under abrasive wear
by: V. V. Netrebko, et al.
Published: (2021)

An engineering method for calculating the abrasive wear of heat-transfer surfaces of a boiler
by: Yatsenko V.P., et al.
Published: (2009)

Analysis of the influence of the nature of the filler surface on the properties of hybrid organic-inorganic nanocomposites based on epoxy oligomer
by: V. D. Myshak, et al.
Published: (2021)

Kinetics of formation and properties of photocured simultaneous epoxy-acrylate IPNs with the prevailing content of an epoxy component
by: N. V. Yarova, et al.
Published: (2021)

Influence of productivity diamond abrasive treatment on the surface morphology wear diamond crystals
by: A. M. Kuzej, et al.
Published: (2016)

The influence of vibration under protective layer application on its microstructure and impact-abrasive wear
by: H. V. Pokhmurska, et al.
Published: (2015)

Abrasive wear resistance of alloyed electric arc sprayed coatings from powder wires
by: V. M. Hvozdetskyi
Published: (2018)

Effect of concentration of hard particles on gas-abrasive wear resistance of composite alloys
by: A. P. Voronchuk
Published: (2009)

Microstructure and resistance to abrasive wear of vibration deposited metal of Fe–Cr–B cored wire
by: A. A. Voitovych, et al.
Published: (2016)

Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
by: O. P. Vynohradova, et al.
Published: (2024)

The influence of thermal treatment on abrasive wear resistance of 65H steel seeding-machine furrow-openers disks
by: V. I. Kyryliv, et al.
Published: (2019)

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review
by: V. I. Lavrinenko
Published: (2018)

Gas-abrasive wear resis-tance at elevated temperatures of coatings produced using arc metallization
by: V. I. Pokhmurskij, et al.
Published: (2013)

Microstructure and abrasive wear resistance of the deposited Ni–Cr–B–Si material with dispersive phases inclusions
by: S. O. Luzan, et al.
Published: (2020)

Compatibility and phase separation of components during the formation of epoxy-rubber compositions
by: V. V. Muzhev, et al.
Published: (2016)

Ferrocene-containing epoxy-polyurethane compositions as perspective material for the plastics of bone defeats
by: N. A. Halatenko, et al.
Published: (2013)

Investigation efficiency abrasive composites formed active technology environment in the area of cutting
by: E. A. Pashchenko, et al.
Published: (2016)

Features of fractal analysis of fractured surfaces of the rubber liners, which work in conditions of abrasive and fatigue wear
by: Ye. V. Kalhankov
Published: (2017)

The analysis of products of wear of diamond - containing composite material
by: O. P. Vynohradova, et al.
Published: (2019)

Determination of Probabilities Stress State of Epoxy Composite Materials under Static Load
by: L. V. Kravtsova, et al.
Published: (2013)

Investigation of the formation of the epoxy-polysiyloxane nanocomposit structure by the infrared spectroscopy method
by: V. S. Havrylova, et al.
Published: (2018)